核磁共振磷谱法测定乳制品中的酪蛋白含量

基于插值法建立乳制品中酪蛋白的核磁共振磷谱定量检测方法。结果表明，该方法的检出限为0.38 g/L（信噪比（RSN）=3），定量限为1.25 g/L（RSN=10）；在5.00～35.00 g/L质量浓度范围内线性良好，相关系数R2大于0.999；加标回收率在91.94%～105.10%范围区间；日内精密度在0.65%～1.40%范围区间；日间精密度在1.40%～1.80%范围区间。对市售不同乳制品中酪蛋白含量进行检测，该方法与GB 31638—2016《酪蛋白》测定结果误差在±5%以内，满足方法可行性对比分析验证要求。该方法相比常规方法样品前处理简单、定量准确性高，大大缩短了检测时间，且有更广泛的适用性，满足乳制品中酪蛋白快速定量检测的要求。     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

铸造3D喷墨打印砂型尺寸精度测量评定方法研究

随着铸造行业的转型发展,3D打印技术已经成熟的应用于制造铸造砂型,所制作的砂型不再单单作为铸造过程中的半成品,而是可以作为产品面向各铸造厂进行销售。但是目前对于砂型的检验标准存在缺失,对于砂型质量的把控和评定缺少依据。针对铸造砂型的尺寸精度,通过设计制作测量试块,给出了一种3D喷墨打印砂型的测量方法及评定标准,填补了目前铸造行业中这一领域在标准上的空白,对推动3D打印技术在铸造行业的应用以及砂型的产品化有着重要的意义。     

Robust Linear Interpolation and Extrapolation of Stationary Time Series in Lp

To deal with uncertainty of the spectral distribution, we consider minimax interpolation and extrapolation problems in L^p for stationary processes. The interpolation and extrapolation problems can be regarded as a linear approximation problem on the unit disk in the complex plane. Although the robust one-step-ahead predictor and interpolator has already been considered separately in the previous literature, we give two conditions for the uncertainty class to find the minimax interpolator and extrapolator in the general framework from both the point of view of the observation set and the point of view of evaluation on the interpolation and extrapolation error under the L^p-norm. We show that there exists a minimax interpolator and extrapolator for the class of spectral densities ε-contaminated by unknown spectral densities under our conditions. When the uncertainty class contains spectral distribution functions which are not absolutely continuous to the Lebesgue measure, we show that there exists an approximate interpolator and extrapolator in L^p such that its maximal interpolation and extrapolation error is arbitrarily close to the minimax error when the spectral distributions have densities. Our results are applicable to the stationary harmonizable stable processes.     

Control-faced dynamics with deformation compatibility for a 5-DOF active over-constrained spatial parallel manipulator 6PUS–UPU

Taking into account the effect of structural compliance, inverse dynamics of the active over-constrained parallel manipulator 6PUS–UPU with five degrees of freedom is solved in this article. Firstly, the relationship between driving forces and actuated force screws of each limb is derived. Then the coordination of elastic deformation between limbs which consider the effect of gravity and inertia is acquired. Finally the unique solution of driving forces for the active over-constrained parallel manipulator is derived by incorporating the force equilibrium equation of the moving platform. To validate the theoretical derivation, dynamics simulation model of manipulator based on rigid–flexible mixed structure is shown and numerical examples are given. Comparison with the traditional method of dynamics based on pseudo-inverse is also made. Finally, a feasible experimental method, as an effective test to the theoretical calculation, is proposed and applied on the prototype.     

Improved error bound for multivariate Chebyshev polynomial interpolation

ABSTRACT

Chebyshev interpolation is a highly effective, intensively studied method and enjoys excellent numerical properties which provides tremendous application potential in mathematical finance. The interpolation nodes are known beforehand, implementation is straightforward and the method is numerically stable. For efficiency, a sharp error bound is essential, in particular for high-dimensional applications. For tensorized Chebyshev interpolation, we present an error bound that improves existing results significantly.     

Air torque position damper hysteresis

The purpose of this paper is to determine the effect of the air torque position (ATP) damper hysteresis on the accuracy of air velocity measurements and the adequacy of the ATP damper mathematical model tested in the present study. A total of three dampers with non-cascading blades were examined: a damper with a single flat blade, a damper with two opposed flat blades, and a damper with two flat blades - one of which is a measuring blade and the other is fixed in the horizontal direction. Furthermore, a total of two damper installation locations in a duct system were examined as well: at the duct exit with a straight duct section preceding the damper and within the duct itself with straight duct sections both preceding and following the damper. The ATP damper hysteresis was found to exert a significant effect on the accuracy of air velocity measurements and the adequacy of the ATP damper mathematical model tested if the ATP damper is more open, i.e. with lower blade angles of attack. Moreover, the ATP damper installed at the duct exit was found to be more susceptible to hysteresis effects than the damper located within the duct.     

An improved feedrate scheduling method for NURBS interpolation in five-axis machining

Five-axis machining plays an important role in manufacturing by dint of its high efficiency and accuracy. While two rotation axes benefit the flexibility of machining, it also brings limitations and challenges. In order to further balance machining precision and efficiency, an improved feedrate scheduling method is presented considering geometric error and kinematic constraints for the Non Uniform Rational B-Spline (NURBS) interpolation in five-axis machining. A simplification method is proposed to calculate the geometric error which describes the deviation between the ideal tool path and the real tool path induced by the non-linear movement. A linear relation between geometric error and feedrate is built to limit the feedrate. The constraints determined by single axis kinematic performance and tangential kinematic performance are also considered. Under these constraints, a constrained feedrate profile is determined. Aiming to get more constant feedrate in the difficult-to-machine areas, this work proposes a scheduling method which combines morphological filtering and S-shape acceleration/deceleration (acc/dec) mode. Simulations and experiments are performed to compare the proposed feedrate scheduling method with two previous feedrate scheduling method and the results prove that the proposed feedrate scheduling method is reliable and effective.     

Comparison of modeling methods for wind power prediction: a critical study

Prediction of power generation of a wind turbine is crucial, which calls for accurate and reliable models. In this work, six different models have been developed based on wind power equation, concept of power curve, response surface methodology (RSM) and artificial neural network (ANN), and the results have been compared. To develop the models based on the concept of power curve, the manufacturer’s power curve, and to develop RSM as well as ANN models, the data collected from supervisory control and data acquisition (SCADA) of a 1.5 MW turbine have been used. In addition to wind speed, the air density, blade pitch angle, rotor speed and wind direction have been considered as input variables for RSM and ANN models. Proper selection of input variables and capability of ANN to map input-output relationships have resulted in an accurate model for wind power prediction in comparison to other methods.     

水下连接器毂座加工工艺研究

针对水下连接器典型工件毂座的加工难点,通过研究其结构特点与材料特性,制定了工艺路线,并通过工艺试验,研究了抑制颤振和自适应插补在复杂型面数控加工中实现技术,确定了关键工序的工艺参数,满足了水下连接器毂座的加工精度和使用性能要求,也为类似结构加工制造提供借鉴。