Joint Power-Trajectory-Scheduling Optimization in A Mobile UAV-Enabled Network via Alternating Iteration

This work focuses on an unmanned aerial vehicle(UAV)-enabled mobile edge computing(MEC) system based on device-to-device(D2D) communication. In this system, the UAV exhibits caching,computing and relaying capabilities to periodically provide specific service to cellular users and D2D receiver nodes in the appointed time slot. Besides, the D2D transmitter can provide additional caching services to D2D receiver to reduce the pressure of the UAV. Note that communication between multi-type nodes is mutually restricted and different links share spectrum resources. To achieve an improved balance between different types of node, we aim to maximize the overall energy efficiency while satisfying the quality-of-service requirements of the cellular nodes.To address this problem, we propose an alternating iteration algorithm to jointly optimize the scheduling strategies of the user, transmitting power of the UAV and D2D-TX nodes, and UAV trajectory. The successive convex approximation, penalty function, and Dinkelbach method are employed to transform the original problem into a group of solvable subproblems and the convergence of the method is proved. Simulation results show that the proposed scheme performs better than other benchmark algorithms, particularly in terms of balancing the tradeoff between minimizing UAV energy consumption and maximizing throughput.     

基于磁偶极子的2阶磁场梯度张量缩并方法

针对磁场定位中2阶磁场梯度张量的理论尚不够完善的现状，提出基于磁偶极子的2阶磁 场梯度张量缩并方法。给出2阶磁场梯度张量的全局模量和局部模量计算公式，分析2阶磁场梯度张量的全局模量和局部模量及相关参数的三维空间分布规律，并给出相关参数k_H、k_Hxy和k_Hz的近似计算公式，比较1阶磁场梯度张量和2阶磁场梯度张量及其模量的分布规律及与距离的关系。计算结果表明：全局模量C_H及参数k_H值在0°≤≤90°时，随着增大而减小，在=0°时最大，在=90°时最小；局部模量C_Hxy和参数k_Hxy值在0°≤≤90°时，随先增加、后减少，当=35° 时最大，当=90°时最小；局部模量C_Hz和参数k_Hz随先减少、后增加，当=0°时最大，当=71°时最小；k_H、k_Hxy和k_Hz的拟合值与理论反演值高度吻合；在距离较近时，2阶磁场梯度张量及模量更敏感；在距离较远时，1阶磁场梯度张量及模量更敏感；在实际磁场定位的应用中，可结合1阶和2阶磁场梯度张量及全局模量进行使用。     

ZnCo2O4纳米管的合成及其电化学性能研究

采用静电纺丝法制备ZnCo₂O₄一维纳米纤维前驱体，通过不同的煅烧温度得到纤维结构完整的ZnCo₂O₄纳米管。通过XRD、SEM和电化学测试等方法对ZnCo₂O₄材料进行结构和性能表征。研究结果表明，制备的纳米纤维直径在0.13～0.22μm之间，且纤维结构完整，表面粗糙，有利于电解液的渗透和储存。在100 mA/g的条件下，ZnCo₂O₄的首次可逆比容量达到972.9 mAh/g，循环200次后，比容量仍能保持431.2 mAh/g以上。     

双亲纳米SiO2颗粒的制备及提高渗吸采收率性能

以正辛基三乙氧基硅烷和3-巯基丙基三乙氧基硅烷为改性剂，以双氧水为氧化剂，在水基环境下对亲水纳米SiO2颗粒表面进行改性，得到具有磺酸基和辛基的双亲纳米SiO2颗粒，并通过红外和热重对其化学结构和热稳定性进行分析。将双亲纳米SiO2颗粒分散在地层水中制备纳米流体，并评价纳米流体的稳定性、界面性质和渗吸效率。利用核磁共振技术探究纳米流体渗吸过程中岩心孔隙内原油运移规律。结果表明，纳米流体储存30 d未出现分层现象，表现出良好的稳定性；经纳米流体处理的岩心亲水性增强。此外，双亲纳米SiO2颗粒将油水界面张力降低至1.7 mN/m；纳米流体渗吸采收率高达22.6%，渗吸初始阶段小孔隙中的原油被动用，而在渗吸后期阶段大孔隙中的原油才被动用。