Synthesis and slurry spray coating of barium strontium alumino silicate on SiC substrate

Barium strontium alumino silicate (BSAS); (Ba_0.6Sr_0.4Al₂Si₂O₈) was synthesized through solid state reaction between BaCO₃, SrCO₃, Al₂O₃ and SiO₂ subjected to wet milling in isopropanol for about 24 h. The sequence of the solid state reaction was studied by subjecting to DG/DTG from room temperature to 1550 °C. The crystallographic phase evolution was confirmed by X-ray diffraction of the powders calcined in the range 1000 to 1300 °C for 2 h. The monoclinic celsian phase obtained at 1300 °C, pelletized through uniaxial pressing was sinterable to 67 to 78% density in the temperature range of 1300 to 1500 °C. The density improved to 75 to 94% after ball milling for 76 h, while ZrO₂ addition further improved the density by 2%. The celcian phase of BSAS was dispersed in isopropyl alcohol, milled for about 24 h and spray coated on to plain SiC and mullite precoated SiC substrates. Sintering of coated samples and characterization for weight gain/loss, microstructure, scratch test prove that mullite + BSAS coating is more effective than single layer coating of BSAS on SiC substrates.     

Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

SiC is a promising functional ceramic material with many great properties. High concentrated SiC slurry with excellent rheology and stability is required in some processes of ceramic forming. In this work, the dispersion of SiC powders was obviously improved by ternary modifiers: γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560), sodium humate and sodium dodecyl sulfate (SDS). Modified SiC slurry showed the lowest viscosity of 0.168 Pa s at a solid content of 50 vol%. The maximum absolute value of zeta potential of SiC increased from 47.3 to 61.6 mV by modification. Sedimentation experiments showed that a highly stable suspension of modified SiC was obtained at pH 10. SiC green body with high density of 2.643 g/cm³ was prepared with modified powders by slip casting. X-ray photoelectron spectra (XPS) and thermogravimetry (TG) measurements indicated the adsorption of modifiers on SiC surface. Therefore, modified SiC powders could stably disperse in aqueous media due to the increase of electrosteric repulsion between particles. The novel strategy used in this study could further improve the dispersion of SiC powders.     

Recent progress on the discrete element method simulations for powder transport systems: A review

Powder transport systems are ubiquitous in various industries, where they can encounter single powder flow, two-phase flow with solids carried by gas or liquid, and gas–solid–liquid three-phase flow. System geometry, operating conditions, and particle properties have significant impacts on the flow behavior, making it difficult to achieve good transportation of granular materials. Compared to experimental trials and theoretical studies, the numerical approach provides unparalleled advantages over the investigation and prediction of detailed flow behavior, of which the discrete element method (DEM) can precisely capture complex particle-scale information and attract a plethora of research interests. This is the first study to review recent progress in the DEM and coupled DEM with computational fluid dynamics for extensive powder transport systems, including single-particle, gas–solid/solid–liquid, and gas–solid–liquid flows. Some important aspects (i.e., powder electrification during pneumatic conveying, pipe bend erosion, non-spherical particle transport) that have not been well summarized previously are given special attention, as is the application in some new-rising fields (ocean mining, hydraulic fracturing, and gas/oil production). Studies involving important large-scale computation methods, such as the coarse grained DEM, graphical processing unit-based technique, and periodic boundary condition, are also introduced to provide insight for industrial application. This review study conducts a comprehensive survey of the DEM studies in powder transport systems.     

涂装车间节水方案企划与实施

某涂装车间在现有节水措施的基础上，通过企划与实施一系列新的技术及精益管理措施，如，磷化出槽喷淋工艺优化、纯水制水率提升、空调冷凝水回用率提升、中水深度处理回用、用水分级管理等，将新鲜水用量从 15. 2 L/m2降至 11. 3 L/m2，达到涂装行业清洁生产评价指标体系（ 2016版）中的 I级标准 12 L/m²要求，处于国内领先水平。     

Multiple Chemical Features Impact Biological Performance Diversity of a Highly Active Natural Product-Inspired Library

A systematic, diversity-oriented synthesis approach was employed to access a natural product-inspired flavonoid library with diverse chemical features, including chemical properties, scaffold, stereochemistry, and appendages. Using Cell Painting, the effects of these diversity elements were evaluated, and multiple chemical features that predict biological performance diversity were identified. Scaffold identity appears to be the dominant predictor of performance diversity, but stereochemistry and appendages also contribute to a lesser degree. In addition, the diversity of chemical properties contributed to performance diversity, and the driving chemical property was dependent on the scaffold. These results highlight the importance of key chemical features that may inform the creation of small-molecule, performance-diverse libraries to improve the efficiency and success of high-throughput screening campaigns.     

文人画对陶瓷绘画创作的影响

陶瓷绘画最早可以追溯到彩陶时期,陶瓷与绘画相互交融发展。至今,文人画的审美精神和文化内涵一直影响着当代陶瓷绘画,在画面的表现形式和内在精神上都极具中国传统文化的艺术精神。     

Citrate- and glycerol triesters as novel dual-functional dispersants and plasticisers for ceramic processing

Short chained triesters of glycerol and citric acid were systematically investigated as novel dual-functional dispersants and plasticisers for use in ceramic processing. Additional systematic studies on a series of diesters having structural similarities with the citrate and glycerol triesters were performed to further assess the significance of specific functional groups for the stabilisation of suspensions.The overall purpose of this work consists in simplifying the formulation for ceramic processing slurries while at the same time limiting the environmental impact and toxicity. The use of multifunctional additives reduces the risk of unwanted interactions between different components. Additionally, the possible use of one additive in more than one role opens the opportunity for an overall reduction in the number and amount of chemicals and therefore reduction of costs and risks.For the citrate ester candidates, different alkoxy groups were tested as well as the acetylation on the hydroxyl group. The glycerol esters differed by the length of the carboxylic chain.Especially triethyl and tributyl citrate are proposed as promising dual-functional additives for ceramic processing. Specifically, for triethyl citrate the dual-function was finally demonstrated by producing a dense piece of 8YSZ through tape casting and subsequent sintering.     

Identification of vivianite,an unusual blue pigment,in a sixteenth century painting and its implications

Vivianite, a blue pigment employed in the past practically only in Northern and Central Europe, but with very limited use, was identified in an early sixteenth century painting, stylistically with Flemish features, from a church in Portugal. The identification of this iron phosphate mineral was made by SEM‐EDS based on the atomic ratio between phosphorus and iron in layers of blue paint (area analysis) and in particles of these same layers (spot analysis). This painting, about which there is no document to prove its authorship, becomes the first case, known in detail, of a sixteenth century painting containing vivianite. Moreover, this find and the presence of a chalk ground, also identified, strongly support the hypothesis of being a Flemish painting.     

Ultra-smooth BaTiO3 surface morphology using chemical mechanical polishing technique for high-k metal-insulator-metal capacitors

The surface roughness of barium titanate (BTO) following its implication by aerosol deposition method (ADM), is a very important characteristic affecting its potential for use in high-k metal-insulator-metal capacitors. The ADM is the best candidate to deposit ceramic films but has two major problems: macroscopic defects and rough interface effects on the BTO surface. In this work, a chemical mechanical polishing (CMP) technique is applied to obtain an ultra-smooth BTO surface morphology by the optimization of several factors including the slurry type, the head rotational speed, and the down pressure. Statistically, we were able to achieve a root mean square (RMS) value of the BTO surface of 1.746 nm by utilizing a two-step polishing process, applied at a head rotational speed of 70 rpm under 5 kg/cm² of down pressure; this RMS value is improved at least 8 times over previous studies. This analysis is based on representative pattern images, three-dimensional images, line profiles, histograms, and power spectra of selected BTO surface areas, further verified with data from both energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.