一种低载噪比突发扩频信号的快速捕获方法实现

针对突发扩频信号用户资源扩大、终端功率降低、系统容量提升等需求,提出了一种低载噪比突发扩频信号的快速捕获硬件实现方法。采用分段匹配滤波器加多普勒并行相干积累的方法,基于硬件实现从算法到工程进行全流程优化设计,最终实现最优的捕获性能。应用结果表明,该硬件设计实现方案的快速捕获性能优越,设计方案正确、可行,已成功应用于工程建设中。     

Strain mediated enhancement in magnetoelectric properties of sonochemically synthesized piezoelectric and piezomagnetic composites

Materials with magneto-electric (ME) properties are of great importance because of their demand in electronic industries. Three dimensional nano-particles of the ME-composites having the general formula (1-x)CoCr_0.3Fe_1.7O₄(CCFO)+(x)BaTiO₃(BTO) (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) were obtained by comprising the piezoelectric-BTO and piezomagnetic-CCFO phases. The individual phases of CCFO and BTO were synthesized separately by ultrasonic irradiation assisted sonochemical and sol-gel routs. X-ray diffraction patterns (XRD) confirmed the well-crystalline nature of both the phases. BTO and CCFO phases were under tensile strain as confirmed by the variation in lattice constants with varying proportion of BTO and CCFO. An energy-dispersive X-ray spectroscopy spectrum confirmed the phase purity of the samples and stoichiometric concentration of elements. Magnetic properties were investigated by M ? H loop measurements and dielectric properties by using RF impedance analyzer. Dielectric constant increased with the increasing percentage of BTO. The maximum value of ME coefficient (24.7 mV/cm?Oe) is observed for the 60%CCFO+40%BTO sample. The obtained results were discussed in the light of grain size, strain and the basic properties of the individual phases. The prepared materials can be applicable in electronic devices where high magneto-electric coefficient is desirable.     

Ferroelectric and electromechanical performance of diverse engineered states of Mn-doped 0.75Pb(Mg1/3Nb2/3)O3-0.25PbTiO3 ceramics

The materials processing history has a great influence on their properties and finally determines their application effect. In this paper, the ferroelectric, polarization-switching current, and strain properties of Mn-doped 0.75Pb(Mg_1/3Nb_2/3)O₃-0.25PbTiO₃ ceramics were studied in fresh state, aged state, and poled state, respectively. Compared with the symmetric polarization-electric-field (P-E) hysteresis loops, current-density-electric-field (J-E) curves, and bipolar electric-field-induced strain (S-E) curves in fresh state samples, asymmetric P-E loops, J-E curves, and bipolar S-E curves were obtained in poled state samples. Well-aged-state samples exhibit double hysteresis P-E loop, four peaks J-E curves, and symmetric S-E curves without negative strain. The symmetry-conforming short-range order (SC-SRO) principle of point defects and internal electric field E_i is employed to clarify the different phenomenon of three states. Results indicated that randomly oriented defect polarization P_D in aged samples can reverse the spontaneous polarization P_S back and result in the double hysteresis P-E loop and four peaks J-E curves. The oriented P_D and resulting E_i in poled-state samples will lead to the asymmetric loops and strain memory effect.     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

Tuning the magnetic properties of Zr2N MXene by biaxial strain

The effects of strain on the magnetic properties of Zr₂N MXene have been investigated by the first-principles calculations. The ground state of strain-free Zr₂N MXene is intrinsically antiferromagnetic. However, the magnetic state of Zr₂N MXene tends to be ferromagnetic when the applied strain is higher than 4%. The transition of magnetic orderings from antiferromagnetism to ferromagnetism under tensile strains can be understood from the Stoner criterion. Besides, the critical temperature (T_c) is about 470 K for the strain-free Zr₂N MXene, indicating that the antiferromagnetic ordering can be robust and maintained at room temperature. The T_c of antiferromagnetic states begins to decrease once the strain is exerted. As the FM ordering is favored, however, the T_c then increases with the applied strain. Under 8% tensile strain, the T_c comes to room temperature (300 K). In addition, both the orientation of easy-axis and the magnetic anisotropy energy (MAE) of Zr₂N MXene fluctuate with the strain. At the strain of 2%, the MAE reaches the largest (203 μeV per Zr atom), mainly resulting from the spin-orbit interactions between occupied and unoccupied p_x/p_y states of Zr atoms. All these tunable and appealing properties make Zr₂N MXene desirable for spintronic applications.     

煤矿冲击地压与冒顶复合灾害研究

随着煤矿向深部发展,矿井动力灾害既表现出冲击地压的部分特征,又表现出冒顶的部分特征。2种典型的灾害打破以往冒顶与冲击地压的发生具有一种互为逆向性的认知规律,在深部高应力煤巷,特别是留顶煤巷道中出现了相互诱导、复合发生的新灾害类型。在总结山东、山西和新疆矿区典型巷道冲击致顶板(顶煤)动力灾害特征的基础上,提出了深部巷道冲击地压与冒顶复合灾害的概念、机理与分类,指出复合灾害机理关键点在于揭示巷道整体系统和破碎区子系统的稳定原理及其2者间的相互影响。建立了巷道发生复合灾害的力学模型,根据扰动响应失稳判据,提出并得到了巷道发生复合灾害的临界应力Pcr、临界软化区半径ρ_cr和最大容许采扰应力增量σ_max,厘清了灾害发生的主控因素,分析了煤岩冲击倾向指数K、支护强度ps、巷道半径ρ₀、煤岩强度σ_c等对灾害发生的影响规律,同时阐明了围岩塑性软化、破碎深度随地应力增加的发育规律。研究结果表明,破碎发育巷道的动力失稳主体为弹性区、软化区与破碎区构成的不稳定系统,垮落主体为破碎区;稳定的破碎区提升了巷道冲击启动临界值,使其启动难度增大,但破碎区的发育又易引起顶煤垮落;巷道稳定支护是解决复合灾害的关键,科学合理支护既能有效调控围岩破碎防冒,又能提升冲击启动临界值。通过理论研究,揭示了巷道冲击地压与冒顶复合灾害的发生机理,阐明了巷道软化与破碎区及其稳控支护对深部破碎发育巷道动力灾害防治的重要性。     

Laboratory tests on the engineering properties of sensor-enabled geobelts (SEGB)

To measure geosynthetic reinforcement strains, sensor-enabled geobelts (SEGB) that perform the reinforcement and self-measurement functions were developed in this paper. The SEGB of high-density polyethylene (HDPE) filled with carbon black (CB) were fabricated by both the industry and the laboratory. To study the mechanical properties and tensoresistivity performance of the SEGB, in-isolation tests and in-soil tests were performed. Hot pyrocondensation pipes (HPP) were used to protect the SEGB against the influence of water. For the SEGB specimens developed in the laboratory, the optimal CB filler content was 47.5%. For the SEGB fabricated by the industry, the optimal CB content was slightly decreased compared to the SEGB fabricated in the laboratory. For the modified SEGB sealed with HPP, the strain at the fracture was improved, while its tensile stress and the frictional property of the geobelt-soil interfaces both decreased slightly. In the pull-out tests, the self-measurement function of the SEGB was proved to be effective for evaluating the deformation behavior of geosynthetic reinforcement. The results are helpful for further application of SEGB technology in engineering.     

深部大采高工作面煤柱留设优化数值模拟研究

为缓解高产高效矿井采掘接续紧张局面，鄂尔多斯地区综采工作面多采用“两进一回”的巷道布置形式，辅运巷在回采结束后用作下一工作面的回风巷，两进风巷之间采用大煤柱护巷。但随着该地区采深600 m以上的深部矿井增多，冲击地压灾害问题逐渐显现，双巷大煤柱留设的弊端也暴露出来。针对此问题，以鄂尔多斯红庆河煤矿3^-1101大采高综采工作面为例，对不同宽度煤柱留设的应力分布规律进行建模研究，提出了合理的煤柱留设宽度，为鄂尔多斯地区类似条件矿井的安全高效开采提供参考依据。     

煤矿冲击矿压预测和防治技术浅析

结合镇城底煤矿22605工作面的地质情况和矿压情况,提出了煤炭生产中冲击矿压的预测和防治措施。通过对22605工作面的地质情况和监测数据分析处理并探究了该工作面矿压显现规律,为其设计了一套适合本工作面的冲击矿压监测和防治体系。防治体系有预防和临时解危双重防治措施,从这两方面考虑可以做到全面防治冲击矿压。该体系可以实现矿井的安全生产,保证工作人员的安全。另通过分析冲击矿压发生的基本原理和监测到的数据,建立煤矿冲击矿压防治体系,能够及时有效地将蕴含在煤体中的冲击矿压释放和消除,达到安全生产的目的。