Re-examination of phase relations between solid solutions in R4Al2O9-R4Si2N2O7-R4Si2O10 (R=Y,Gd, Yb) systems

Samples in Si–Al-R-O-N (R = Y, Gd, Yb) systems were prepared by solid-state reactions using R₂O₃, Al₂O₃, SiO₂ and Si₃N₄ powders as starting materials. X-ray diffraction was done to investigate RAM-J(R) solid solutions [RAM = R₄Al₂O₉, J(R) = R₄Si₂N₂O₇] formation and their equilibrium with RSO (R₄Si₂O₁₀). Phase relations between RAM, J(R) and RSO at 1700 °C were summarized in a phase diagram. It was determined that a limited solid solution of RAM and RSO could be formed along RAM-RSO tie-line, while RAM and J(R) form a continuous solid solution along RAM-J(R) tie-line. In RAM-J(R)-RSO ternary systems, the RAM-J(R) tie-lines were extended towards the RSO corner to form a continuous solid solution area of JRAMss (R = Y, Gd, Yb). The established phase relations in the Si–Al-R-O-N (R = Y, Gd, Yb) systems may facilitate compositional selections for developing JRAMss as monolithic ceramics or for SiC/Si₃N₄ based composites using the solid-solutions as a second refractory phase.     

Feasibility of high performance in p-type Ge1−xBixTe materials for thermoelectric modules

GeTe is a promising candidate for the fabrication of high-temperature segments for p-type thermoelectric (TE) legs. The main restriction for the widespread use of this material in TE devices is high carrier concentration (up to ∼ 10²¹ cm⁻³), which causes the low Seebeck coefficient and high electronic component of thermal conductivity. In this work, the band structure diagram and phase equilibria data have been effectively used to attune the carrier concentration and to obtain the high TE performance. The Ge_1−xBi_xTe (x = 0.04) material prepared by the Spark plasma sintering (SPS) technique demonstrates a high power factor accompanied by moderate thermal conductivity. As a result, a significantly higher dimensionless TE figure of merit ZT = 2.0 has been obtained at ∼ 800 K. Moreover, we are the first to propose that application of the developed Ge_1−xBi_xTe (x = 0.04) material in the TE unicouple should be accompanied by SnTe and CoGe₂ transition layers. Only such a unique solution for the TE unicouple makes it possible to prevent the negative effects of high contact resistance and chemical diffusion between the segments at high temperatures.     

Crystal structure,polarization properties and reverse nonlinearity of solid solutions of the KNN-PZT system in a wide range of external influences

Experimental research of the crystal structure, polarization properties, and reverse nonlinearity of ceramic solid solutions of the (1-x) (Na_0·5K_0.5)NbO₃-xPb(Ti_0·5Zr_0.5)O₃ (KNN-PZT) quasi-binary system with 0.0 = x ≤ 1.0 in a wide range of external influences (temperatures, strength of dc/ac fields) has been done. Based on the X-ray structural data, an x-T diagram of the system has been constructed, and correlations of the behavior of the macroproperties of solid solutions with the features of their phase states with the temperature change have been established. It has been concluded that it is advisable to use the proposed compositions when designing microelectronic devices operating in various extreme conditions.     

基于GIS单线图的配网停电单模拟操作应用研究

配电网停电会造成电力系统供配电可靠性以及服务质量下降,研究基于地理信息系统(GIS)单线图的配网停电单模拟操作应用。利用网格长度作为基本单位建立坐标系,以选取起始点与终止点为基础,通过四参数法将GIS坐标映射至图纸网格内,实现配网内设备初步布局,将杆塔、站房和整体均匀分布作为优化目标,设置多目标优化目标函数实现GIS单线图最终优化。选取某电力公司配网作为单模拟操作应用对象,模拟结果表明,单模拟操作配网停电后,该配网各负荷点年故障率、次平均停电时间以及年停电时间均有所减少,可有效提升配网的供配电可靠性。     

Effect of Li2O on the crystallization behavior of CaO-Al2O3-SiO2-Li2O-Ce2O3 mold slags

The effect of Li₂O on the crystallization properties of CaO-Al₂O₃-SiO₂-Li₂O-Ce₂O₃ slags was investigated. With increasing the Li₂O content, LiAlO₂ and CaCeAlO₄ were the main crystalline phases. LiAlO₂ formed for the charge compensating of Li⁺ ions to [AlO₄^5?]-tetrahedrons, and CaCeAlO₄ formed as a result of the charge balance of Ce³⁺ ions, Ca²⁺ ions, and [AlO₆^9?]-octahedrons. Increasing the content of Li₂O to 10%, the crystallization temperature was the highest, and the incubation time was the shortest. The crystallization ability was strong due to the three factors of strengthening the interaction between ions and ion groups, decreasing the polymerization degree, and increasing the melting temperature. Further increasing the content of Li₂O, the crystallization performance was obviously suppressed, because the melting temperature and the force between the cations and the anion groups decreased.     

基于改进EEMD与混沌振子的配电网故障选线

提出改进的集合经验模态分解(MEEMD)和混沌振子相结合的电网故障微弱信号检测方法。首先,建立神经网络预测模型,通过神经网络对配网各线路零序电流进行短时预测,滤除故障信号中的背景信号;其次,为了检测配网发生单相接地故障后微弱的5次谐波信号,提出结合多尺度排列熵和完备集合经验模态分解(CEEMD)改进的改进的集合经验模态分解算法;处理已经滤除背景信号的故障信号,提取其第一固有模态函数作为混沌振子的输入。混沌振子对和内驱动力信号同频的外策动力信号有较高的敏感性,通过混沌振子输出的相图完成电网故障选线。     

Effect of temperature on fast forging process of Mg-Ni samples for fast formation of Mg2Ni for hydrogen storage

Fast-Forging was used as a Severe Plastic Deformation technique to process Mg/Ni fine powder mixtures at a ratio corresponding to the eutectic composition. The samples were processed at different temperature, increased successively from room temperature up to above 500 °C. The one shock forging operation led to a reduction rate comprised between 80 to more than 90% depending of the applied temperature. Interestingly, a threshold temperature was pointed out for which amounts of the binary Mg₂Ni alloy were directly synthesized in increasing proportions when increasing temperature. A maximum amount of Mg₂Ni was synthesized according the nominal proportions at the highest applied temperature. Besides, numerical simulations were developed to consider and integrate to the forging process, the heat arising from the mechanical energy at deformation. Interestingly the total temperature at shock – heat applied to and heat developed in – indicates that the threshold temperature correspond well with the eutectic temperature as reported in the phase diagram. Early hydrogenation cycles suggest that both mechanical defects in brittle Mg and presence of amounts of Mg₂Ni as catalyst should be combined to optimize the hydrogenation characteristics.     

海上钻修机结构裂纹安全性评估

基于BS 7910 2A级评估原理，对某海上钻修机钻井支持模块进行断裂评估。鉴于有限元方法能够大幅提高计算失效评估图评定参数的准确度，采用ANSYS软件子模型技术和奇异单元构造裂纹精细有限元模型，通过节点位移插值计算裂纹尖端应力强度因子，应用路径映射对应力进行线性化求得薄膜应力和弯曲应力，从而完成缺陷构件的失效评估图评定，结果表明：该钻修机钻井支持模块含裂纹构件的评估点位于失效评估曲线内侧，安全因数为1.51，结构能够继续安全服役。所用方法可为含裂纹缺陷的海洋结构物的安全评估提供参考。