Radar‐based structural health monitoring of wind turbine blades: The case of damage localization

This short communication reports on a radar approach for structural health monitoring of wind turbine blades. Therefore, a bistatic frequency‐modulated continuous wave (FMCW) radar in the frequency range from 33.4 to 36.0 GHz has been developed and tested experimentally using a laboratory wind turbine demonstrator. A differential damage localization framework is presented here that exploits signal differences between measurements from the intact and the damaged structure for 3D imaging of the defect. We have achieved the localization of a 30‐mm cut in a glass fiber composite structure as well as the localization of a water pack at the backside of the specimen with a localization error of several centimeters.     

旋转叶片电加热防冰系统设计与应用

在开展结冰试验时，结冰风洞风扇叶片前缘有结冰风险，影响风洞安全运行。针对大型旋转叶片结冰问题，提出了旋转叶片电加热防冰系统设计方法，研制了大型结冰风洞旋转叶片电加热防冰系统。首先，研制了内置电加热单元和温度反馈的防冰叶片。针对叶片复杂的工作环境，提出一种新的旋转叶片电加热防冰功率计算方法，通过精确测量和方案优化，设计了基于特殊环境的分半式、大尺寸、高线速度、碳刷自动移开/压紧的导电滑环。最后，采用变结构分级温度闭环和试验参数连锁防冰控制策略解决了旋转叶片结冰问题。该系统已应用于大型结冰风洞，运行中加热电流和叶片温度反馈信号传输连续，所有旋转叶片前缘快速加热且温度分布均匀，防冰效果好。     

电厂汽轮机组振动问题分析与解决对策

电厂中的汽轮发电机组在其中所占据的地位极为关键重要。在日常运行中,汽轮机组系统或多或少的存在一定程度的振动问题,此振动问题在一定参数值范围内也是能够允许的。但如果振动问题一旦超过其所允许的范围,则会对整个汽轮机组的工作及电厂的顺利运行带来极为不利的影响。文章首先对电厂汽轮机组振动问题的特点进行了阐述说明,之后结合实例着重对其发生原因及相关的解决对策进行了全面化的分析研究。     

Performance evaluation of a solarized gas turbine system integrated to a high temperature electrolyzer for hydrogen production

In this paper, the performance of a solar gas turbine (SGT) system integrated to a high temperature electrolyzer (HTE) to generate hybrid electrical power and hydrogen fuel is analyzed. The idea behind this design is to mitigate the losses in the electrical power transmission and use the enthalpy of exhaust gases released from the gas turbine (GT) to make steam for the HTE. In this context, a GT system is coupled with a solar tower including heliostat solar field and central receiver to generate electrical power. To make steam for the HTE, a flameless boiler is integrated to the SGT system applying the SGT extremely high temperature exhaust gases as the oxidizer. The results indicate that by increasing the solar receiver outlet temperature from 800 K to 1300 K, the solar share increases from 22.1% to 42.38% and the overall fuel consumption of the plant reduces from 7 kg/s to 2.7 kg/s. Furthermore, flameless mode is achievable in the boiler while the turbine inlet temperature (TIT) is maintained at the temperatures higher than 1314 K. Using constant amounts of the SGT electrical power, the HTE voltage decreases by enhancing the HTE steam temperature which result in the augmentation of the overall hydrogen production. To increase the HTE steam temperature from 950 K to 1350 K, the rate of fuel consumption in the flameless boiler increases from 0.1 m/s to 0.8 m/s; however, since the HTE hydrogen production increases from 4.24 mol/s to 16 mol/s it can be interpreted that the higher steam temperatures would be affordable. The presented hybrid system in this paper can be employed to perform more thermochemical analyses to achieve insightful understanding of the hybrid electrical power-hydrogen production systems.     

耐冲击型金刚石圆锯片锯切受力的数值模拟(二)——以新型半圆形水槽锯片为例

建立耐冲击型金刚石锯片锯切受力的有限元分析模型，围绕新型半圆形水槽和传统U型水槽的2种齿形结构，以数值模拟对比研究金刚石圆锯片的锯切受力。仿真结果表明:在承受相同载荷的情况下，新型半圆形水槽锯片较传统U型水槽锯片在锯切受力时的变形、应力方面都得到了明显改善，其变形量减少11.56%，第一、第三主应力分别降低24.04%和34.19%，因而其承受大载荷和耐冲击性能良好。      

Transient performances of the gas turbine recuperating waste heat through hydrogen rich fuels

Operational rules and control strategies of the chemically recuperated gas turbine (CRGT) in the marine propulsion are investigated in this paper. The Minimization of Gibbs free energy method is used to calculate the diesel-steam reforming reaction which products synthetic hydrogen rich fuels, and a universal model of the chemical regenerator which is easily applied to different application environments is created. The hydrogen production and hydrogen molar fraction are investigated to verify that the CRGT improve the combustion performances under low working conditions. Off-design calculations are performed to derive proper operational rules, and transient calculations are performed to investigate the best control strategies for the systems. The modelling approach of the chemical regenerator can be generally used in the chemically recuperated gas turbine. The elaborate operational rules can greatly improve the thermal efficiencies under every working condition. The system using synchronous control strategies have better regulation speed and operation stability than that using asynchronous control strategies.     

Fracture mechanics approach for failure of adhesive joints in wind turbine blades

Composite components of wind turbine blade are assembled with adhesive. In order to assess structural integrity of blades it is needed to investigate fracture of joints. In this study, finite element analysis based on fracture mechanics was conducted to characterize failure of adhesive joint for wind turbine blade. The cohesive zone model as proposed fracture mechanics approach was verified through the comparison of numerical results with experimental data. Finite element models of wind turbine were developed to predict damage initiation and propagation. Numerical results based on fracture mechanics showed that failure was initiated in the edge of the adhesive bond line due to high level of shear stress prior to reaching the extreme design loading and propagated progressively.     

Creep and microstructure evolution of foreign and domestic 10Cr rotor steel

In order to understand the property features of domestic 10Cr steel used for turbine rotor in ultra- supercritical unit, the research was conducted on domestic and foreign 10Cr steel for comparison. Firstly, the development of rotor steel and research situation of foreign and domestic 10Cr steel were introduced. The creep and microstructure evolution was studied on foreign and domestic 10Cr rotor steel for comparison. The results indicate that creep rupture strength at 595?? of the foreign 10Cr steel is higher than that of domestic 10Cr steel. The foreign and domestic 10Cr rotor steels have similar microstructure evolution features. With increasing time, different phases including M23C6?? MX?? Laves propagate, accumulate and grow subsequently. The Nb- rich phase with large size is found in domestic 10Cr steel and thought to have negative influence on properties.     

Experimental Validation of Reaction Rate Distributions for a SVEA-96+ BWR Assembly with Hafnium Control Blades

The accurate estimation of reactor physics parameters related to the presence of cruciform absorber blades in boiling water reactors (BWRs) is important for safety assessment and for achieving flexible operation during the cycle. Characteristics that are affected significantly include distributions of the total fission (F_tot) and ²³⁸Ucapture (C₈) rates for controlled regions. Representative experimental investigations have been performed in the framework of the LWR-PROTEUS programme. In particular, the LWRPROTEUS I-2A experiments concerned the neutronics characterisation of a SVEA-96+ BWR assembly controlled with a hafnium (Hf) blade under full-density water moderation conditions. The current paper presents the comparisons of the measured F_tot and C₈ pin-wise distributions with a variety of stochastic and deterministic calculations: (a) MCNPX2.5 using recent nuclear data libraries (JEFF-3.1, ENDF/BVI. 8, and JENDL-3.3), (b) PHOENIX4 using ENDF/B-VI.3, (c) BOXER using JEF-1, (d) CASMO₄ using JEF-2.2, and (e) HELIOS1.6 using ENDF/B-VI.1. The calculation/experiment comparisons show standard deviations from 1.2% (MCNPX2.5) up to 1.9% (BOXER) for the prediction of the F_tot distribution, the highest individual discrepancy (7.6% with BOXER) being seen close to the “Hf-vertex.” The C₈ comparisons show systematically better agreement than those of F_tot, the lowest standard deviations being 1.0% (BOXER) and the highest only 1.4% (HELIOS). In addition, sensitivity studies highlight the greater importance of modelling aspects, compared with that of nuclear data libraries, for the achievement of satisfactory and validated F_tot and C₈ predictions.     

Study on performance and flow field of an undershot cross-flow water turbine comprising different number of blades

Recently,small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels.The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines.However,because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines,it remains unclear whether the number of blades has an effect on the performance or flow fields.Thus,in this research,experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades.The findings show that the turbine output and torque are lower,the fluctuation is significantly higher,and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.