Synthesis and characterization of SrFeOx hetero-film resistance-switching device with low operation voltage

As a critical topological phase transition material, SrFeO_x could play an essential role in the field of resistive memory. How to implement resistance-switching more softly and ensure the stability of materials has always been a relevant research hotspot. Regulating the oxygen environment during the deposition process of the films can effectively control the stoichiometry of the functional layer and then improve the resistance-switching characteristics of the device. In this paper, a SrFeO_x hetero-film was prepared by oxygen pretreatment on the SrRuO₃ surface before SrFeO_x deposition, and the as-assembled micrometer-scale device exhibits a low set operating voltage of 0.6 V and favorable cycling characteristics. The SrFeO_x hetero-film reveals a vertical brownmillerite superlattice-like structure with ～20 nm perovskite buffer layer, which benefits the connection and rupture of conductive filament. Additionally, XPS and UV–vis were used to analyze the bonding energy and band gap of SrFeO_x hetero-film, and offers the experimental basis for the explanation of the conductive mechanism. Therefore, the device based on SrFeO_x hetero-film with low operation voltage provides a reference for low power consumption research on topological phase transition material.     

Process and joint quality of ultrasonic vibration enhanced friction stir lap welding

In order to improve the process effectiveness and joint quality, ultrasonic vibrations were integrated with friction stir lap welding. Effect of ultrasonic exertion on the process and joint quality of AA 6061-T6 were investigated. Upon ultrasonic exertion, joints owned larger effective lap width, shorter hooks and improved strength. Weld fracture mode changed from a ductile–brittle mixed mode to a more ductile mode while the fracture path shifted from lap interface to beyond the stir zone. Material flow and interface defects were characterised using lap welded dissimilar aluminium alloy joints. Ultrasonic vibration improved the material flow and reduced the interfacial defects. Variations in failure load of joints were found in accordance with the variations in material flow and interfacial defects.     

垂直冲击试验机的研制

为满足简便检测塑料产品抗冲击强度的需求,研制了垂直冲击试验机。对垂直冲击试验机的结构进行了设计,基于力学原理进行了受力计算,并对工作原理与相对基准设定问题进行了分析。介绍了垂直冲击试验机的操作方法,并进行了规格校验。     

Application of adhesively bonded single lap joints for fracture assessment of adhesive materials

In this study, a method has been proposed to obtain the failure envelope of brittle adhesives using the experimental failure loads of precracked single lap joints (SLJs). The proposed technique is based on the principles of linear elastic fracture mechanics (LEFM), on J-integral relations, and on results of a numerical analysis. Compared to the previous approaches, the introduced experimental method has some advantages such as low manufacturing costs and simpler test procedure. The proposed method can also provide a wide range of mode mix ratios without the need of an additional apparatus. The fracture envelope obtained from the proposed method was then verified by performing some fracture tests including double cantilever beam (DCB), end-notched flexure (ENF), and single leg bending (SLB) specimens. Good correlation was seen between the fracture envelopes of the proposed method and the ones obtained from the fracture mechanics experiments.     

Discharge coefficient for vertical sluice gate under submerged condition using contraction and energy loss coefficients

A novel method is suggested for the determination of flow discharge in vertical sluice gates with considerably small bias. First, in order to derive an equation for the discharge coefficient, energy-momentum equations are implemented to define the physical realization of the phenomenon. Afterward, the discharge coefficient is presented in terms of contraction and energy loss coefficients. Subsequently, discharge coefficient, contraction, and energy loss coefficients were determined through an implicit optimization technique on the data. Data analysis illustrated that there is a meaningful power relationship between the contraction and energy loss coefficients. Thereafter, dimensional analysis is performed and an explicit best-fit regression equation is developed for defining the energy loss coefficient. The obtained equations for contraction and energy loss coefficients were then used in the computation of the discharge coefficient and determination of the flow discharge in the vertical sluice gate. The performance of the developed approach is validated against the selected benchmarks existing in the literature.     

AP1000稳压器波动管竖直管段空气-水CCFL实验研究

使用竖直管代替波动管模型开展稳压器波动管竖直管段内空气-水两相逆流限制（CCFL）特性可视化实验研究。实验现象表明:竖直管与上容器接口处的局部CCFL决定了进入竖直管内的液相流量；竖直管内的局部CCFL决定了从竖直管流出的液相流量；两处局部CCFL均随空气流量的增大而增强。在较低气量情况，进入竖直管内的液相能够完全或大部分流出，竖直管内的局部CCFL较弱，上容器和竖直管接口处的局部CCFL在整体CCFL中占主导地位，整体CCFL程度随着上容器液位升高而略有增强。在高气量情况，从上容器进入竖直管的液相大部分或者完全被限制而不能向下流出，竖直管内的局部CCFL强烈，在整体CCFL中占主导地位，整体CCFL特性不受上容器液位变化的影响。通过实验数据拟合得到了新的稳压器竖直管CCFL模型。稳压器波动管CCFL数据和稳压器竖直管CCFL数据基本重合，表明波动管CCFL主要由CCFL-U决定。      

垂直水平联合自流排渗在银山矿业尾矿库降渗工程中的应用

为解决江西铜业集团银山矿业尾矿库安全检查中发现的坝体浸润线超高问题，保证坝体稳定性，结合尾矿库现场实际情况，在充分分析不同排渗方式特点的基础上，提出采用垂直水平联合自流排渗方式，并制定了经济合理可行的技术方案。通过浸润线观测数据表明:在落实排渗方案以后，坝体浸润线有明显的下降，坝体局部渗水、沼泽化现象有明显改观，有效地保证了坝体稳定性。     

Evaluation of different modelling conditions in the cohesive zone analysis of single-lap bonded joints

Cohesive Zone Models (CZM) are widely used for the strength prediction of adhesive joints. Different simulation conditions, such as damage initiation and growth criteria, are available for use in CZM analyses to provide the mixed-mode behaviour. Thus, it is highly relevant to understand in detail their influence on the simulations’ outcome. This work studies the influence of different conditions used in CZM simulations to model a thin adhesive layer in single-lap joints (SLJ) under a tensile loading, for an estimation of their influence on the strength prediction under diverse geometrical and material conditions. Validation with experimental data is considered. Adhesives ranging from brittle to highly ductile and overlap lengths (L_O) between 12.5 and 50 mm were considered. Different studies were considered: Variation of the elastic stiffness of the cohesive laws, different mesh refinements, study of the element type, and evaluation of several damage initiation and growth criteria. The analysis carried out in this work confirmed the known suitability of CZM for static strength prediction of bonded joints and pointed out the best set of numerical conditions for this purpose. Inaccurate results can be obtained if the choice of the modelling conditions is not the most suitable for the problem.     

Improving performance of high-power indium gallium nitride/gallium nitride-based vertical light-emitting diodes by employing simple n-type electrode pattern

In this work, simple n-type electrode structures were used to enhance the electrical and optical performances of fully packaged commercially mass-produced vertical-geometry light-emitting diodes (VLEDs). The forward bias voltage of the VLED with a Y-pattern electrode increased less rapidly than that of VLEDs with a reference electrode. The VLEDs with the reference and Y-pattern electrodes exhibited forward voltages of 2.93±0.015 and 2.89±0.015 V at 350 mA and 3.77±0.015 and 3.53±0.015 V at 2000 mA, respectively. The VLEDs with the Y-pattern electrode resulted in a higher light output than the VLEDs with the reference electrode with increase in the drive current to 2000 mA. The emission images showed that the VLEDs with the Y-pattern electrode exhibited better current spreading behavior and lower junction temperatures than the VLEDs with the reference electrode. With increase in the current from 350 to 2000 mA, the VLEDs with the Y-pattern electrode experienced a 39.4% reduction in the wall plug efficiency, whereas the VLEDs with the reference electrode suffered from a 43.3% reduction.     

Experimental investigation on bubble growth and detachment characteristics on vertical microelectrode surface under electrode-normal magnetic field in water electrolysis

The effects of current density and electrode-normal magnetic fields on the growth and detachment characteristics of a single bubble on vertical microelectrode surface have been investigated. A high-speed camera was used to capture the bubble evolution behavior and the bubble contact characteristic parameters were extracted and analyzed with OpenCV-Python program. The results reveal that an apparent bubble coalescence behavior occurs at low current densities and can be gradually inhibited with increasing current density. With the increase of current density, the bubble growth rate, departure diameter, working electrode potential and potential fluctuations increase, while the bubble growth time first increases and then decreases continuously. The upper microelectrode surface is more easily covered than the lower microelectrode surface. The whole microelectrode can be completely covered when the current density exceeds a certain limit with and without magnetic fields. The external magnetic fields can obviously promote the bubble detachment behavior within a relatively large current density range.