Thermal depolarization and electromechanical hardening in Zn2+-doped Na1/2Bi1/2TiO3-BaTiO3

Na_1/2Bi_1/2TiO₃-based materials have been earmarked for one of the first large-volume applications of lead-free piezoceramics in high-power ultrasonics. Zn²⁺-doping is demonstrated as a viable route to enhance the thermal depolarization temperature and electromechanically harden (1-y)Na_1/2Bi_1/2TiO₃-yBaTiO₃ (NBT100yBT) with a maximum achievable operating temperature of 150 °C and mechanical quality factor of 627 for 1 mole % Zn²⁺-doped NBT6BT. Although quenching from sintering temperatures has been recently touted to enhance T_F-R, with quenching the doped compositions featuring an additional increase in T_F-R by 17 °C, it exhibits negligible effect on the electromechanical properties. The effect is rationalized considering the missing influence on conductivity and therefore, negligible changes in the defect chemistry upon quenching. High-resolution diffraction indicates that Zn²⁺-doped samples favor the tetragonal phase with enhanced lattice distortion, further corroborated by ²³Na Nuclear Magnetic Resonance investigations.     

Crowdwork platform governance toward organizational value creation

Crowdwork, a new form of digitally mediated employment and part of the so-called gig economy, has the capacity to change the nature of work organization and to provide strategic value to workers, job providers, and intermediary platform owners. However, because crowdwork is temporary, large-scale, distributed, and mediated, its governance remains a challenge that often casts a shadow over its strategic value. The objective of this paper is to shed light on the making of value-adding crowdwork arrangements. Specifically, the paper explores crowdwork platform governance mechanisms and the relationships between these mechanisms and organizational value creation. Building on a comprehensive review of the extant literature on governance and crowdwork, we construct an overarching conceptual model that integrates control system and coordination system as two complementary mechanisms that drive crowdwork platform governance effectiveness and the consequent job provider benefits. Furthermore, the model accentuates the role of the degree of centralization and the degree of routinization as critical moderators in crowdwork platform governance. Overall, the paper highlights the potential of crowdwork to contribute not only to inclusion, fair wages and flexible work arrangements for workers but also to organizations’ value and competitive edge.     

退火温度对冷轧DP980钢力学性能的影响

利用连续退火模拟机对DP980试验钢进行了连续退火试验,并通过扫描电镜、电子背散射衍射、透射电镜等研究了不同退火温度下(775、800、825和850 ℃),试验钢显微组织的演变规律和力学性能的变化趋势。结果表明:试验钢的屈服强度随着退火温度的升高而不断增大(从705 MPa增大到850 MPa),抗拉强度和断后伸长率则随着退火温度的升高而不断减小(抗拉强度从1150 MPa减小到1030 MPa;伸长率从8.9%减小到5.3%),这与试验钢的显微组织构成和形态分布密切相关。此外,不同退火温度下,试验钢的加工硬化率曲线均呈现单调下降的趋势。     

Experimental investigation on high temperature wettability and structural behaviour of SAW fluxes using MgO–TiO2–SiO2 and Al2O3–MgO–SiO2 flux system

To establish the relationship between wettability and structure with the change in SAW flux composition, the contact angle measurement study was performed at 1700 K. For MgO–TiO₂–SiO₂ and Al₂O₃–MgO–SiO₂ flux system the wetting behaviour was studied by evaluating the contact angle as well as surface tension properties. Sessile drop method was used to determine the wetting properties of SAW fluxes. Twenty-one SAW fluxes were designed & developed by applying mixture design approach of design of experiments. Chemical, phase and structural properties of SAW fluxes were measured using modern techniques such as X-ray fluorescence (XRF), X-ray diffraction (XRD) & Fourier Transform Infra-red spectroscopy (FTIR). As per the calculated contact angle value, different surface tension values for MgO–TiO₂–SiO₂ and Al₂O₃–MgO–SiO₂ flux system was calculated using Young's & Boni's equations. Using Dupre's equation the adhesion energy for twenty-one basic fluxes was also calculated. Measured contact angle value increased with increase in the TiO₂/MgO & TiO₂/Al₂O₃ flux ratio. Lower contact angle gives higher wettability between the flux and the heating substrate. With increase of TiO₂/SiO₂ ratio up to 1.5 to 2.0 the calculated surface tension value is decreasing while after that it is increased with increase in TiO₂/SiO₂ ratio.     

12CrNi3钢外锁止套局部表面激光淬火工艺

利用半导体激光宽带对12CrNi3外锁止套局部进行表面淬火处理,并对处理后的零件进行外观检验、显微组织观察、硬度检测分析和摩擦磨损试验。试验结果表明:采取定光斑方式,激光头到工件表面扫描区域中心点距离375 mm(离焦量为0),工件倾斜22°,激光头倾斜18°,温度1350 ℃,扫描速度9 mm/s,单道扫描后表面平整性最好。表面激光淬火硬化层为750～1000 μm,最浅处为443.1 μm,硬化区组织为极细小马氏体组织,硬度达600～700 HV0.2,是基体硬度的2倍左右, 约为渗碳+淬火态硬度的1.3倍,且相变硬化区耐磨性能明显提高。     

Investigating hydrogen evolution reaction properties of a new honeycomb 2D AlC

The hydrogen due to its high mass energy density is a new renewable, economically viable and clean resource. The most eco-friendly and economical approaches for the generation of hydrogen through hydrogen evolution is electrochemical water splitting. The two-dimensional (2D) nanomaterials have been recently found as potential candidates as non-noble metal catalyst for hydrogen evolution. In this work, we have systematically studied the structural and electronic properties of the newly predicted hexagonal-aluminium carbide monolayer (h-AlC ML) under the framework of dispersion-corrected density functional theory (DFT) calculations. The calculated electronic total density of states (TDOS) of h-AlC ML predict its metallic nature in contrast to other polar honeycomb 2D materials which are either semiconducting or semimetallic. The metallic behavior of h-AlC monolayer which motivates us to investigate its HER activity results due to the presence of delocalized charge density near Fermi level. Thus, we have investigated the HER activity of h-AlC ML by calculating hydrogen (H) adsorption energy (ΔE_H) and Gibbs free energy (ΔG_H) at three different sites of the 3 × 3 and 4 × 4 supercells of h-AlC ML; top of carbon atom (E_H-C), top of aluminium atom (E_H-Al) and hollow site (E_H-Hollow). Our results show that the hollow site is most catalytically active site in both supercells of h-AlC ML. We believe that our results will inspire experimentalists to fabricate this new 2D material for achieving the desired range of HER activity.     

Effect of metallurgical evolution during post-weld aging treatment on localised corrosion of resistance spot welding joints of A286 superalloy

The combined effect of resistance spot welding and precipitation hardening on the localised corrosion of A286 superalloy is studied. The specimens tested by double loop electrochemical potentiokinetic reactivation were welded in the solution treated condition, and then subjected to different precipitation hardening treatments. For both base metal and weld nugget, the maximum localised corrosion is reached when η phase is clearly observable. The fact that the localised corrosion resistance of weld nugget is different from that shown by base metal may be explained by the segregation of Ni and Ti towards the interdendritic region of weld nugget (studied by using scanning electron microscope/energy dispersive X-ray analysis).     

Ejector in R410A vapor compression systems with experimental quantification of two major mechanisms of performance improvement: Work recovery and liquid feeding

This paper presents experimental data and analysis comparing the performance of an R410A ejector vapor compression system to those of a liquid-fed evaporator system and a conventional expansion valve system. The objective was to quantify separately two major improvements of the ejector system: work recovery and liquid-fed evaporator. The ejector system was first compared to a system with liquid-fed evaporator at matching cooling capacities and revealed improvements from 1.9% to 8.4% solely due to the work recovery of the ejector. When compared to a conventional expansion valve system at the same cooling capacity, the ejector setup improved COP from 8.2% to 14.8% due to simultaneous benefits of liquid-fed evaporator and work recovery. Overall ejector efficiencies from 12.2% to 19.2% were achieved.     

DP980+Z烘烤硬化值与退火温度的关系

摘要：为了研究退火温度对镀锌DP980+Z烘烤硬化值的影响，退火温度控制在760～820℃之间，系统分析退火温度对烘烤硬化值的影响。通过准静态拉伸试验机测量烘烤硬化值及抗拉强度，采用lepara试剂对组织中的马氏体进行着色，利用金相显微镜及图像处理软件测量马氏体的体积分数；采用扫描电镜观察DP980+Z的双相组织特点，并且将组织图片通过CAD转化成有限元图进行网格划分，建立代表性体积单元（RVE），通过有限元分析铁素体、马氏体强度对烘烤硬化值的影响。在同样的变形量情况下，DP980+Z的原始屈服强度越高，烘烤硬化值越高。