抗冲ACR树脂的合成及其性能评价

采用种子乳液聚合法,以丙烯酸丁酯为核层单体、甲基丙烯酸甲酯为壳层单体、甲基丙烯酸烯丙酯为交联剂制备了抗冲ACR树脂。考察了不同加料方式对ACR乳液粒径及对PVC冲击性能的影响,结果表明:连续滴加方式可实现乳液粒径的稳定控制,并能得到性能优异的抗冲ACR树脂。     

Preparation of thermoresponsive poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) nanogels via inverse miniemulsion polymerization

Stimuli-responsive polymeric nanogels hold great potential in biological applications. In this work, thermoresponsive polymeric nanogels were conveniently prepared through inverse miniemulsion polymerization of two monomers with a good biocompatibility, N-vinylcaprolactam and 2-methoxyethyl acrylate. A macromolecular crosslinker, poly(ethylene glycol) dimethacrylate (PEGDMA), was used to achieve a better thermoresponsiveness, compared with low-molecular-weight crosslinkers. The prepared poly(N-vinylcaprolactam-co-2-methoxyethyl acrylate) (poly(NVCL-co-MEA)) nanogels could be well redispersed in aqueous systems, displaying a reversible thermoresponsive transition behavior. The influences of the synthesis parameters including the emulsifier content, PEGDMA content, and monomer composition on the particle properties of poly(NVCL-co-MEA) nanogels both in inverse emulsions and in aqueous dispersions were systematically investigated. Furthermore, the impacts of the monomer composition and PEGDMA content on the thermoresponsiveness of poly(NVCL-co-MEA) nanogels were also studied. Promisingly, the introduction of MEA monomeric units to the copolymer chains only slightly reduced the thermoresponsiveness of poly(NVCL-co-MEA) nanogels. This feature allows to improve the biocompatibility of polymeric nanogels by using MEA as the comonomer without need to compromise the thermoresponsiveness of nanogels. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48237.     

纳米ZnO/有机氟改性丙烯酸酯乳液的合成与表征

以纳米ZnO、甲基丙烯酸十二氟庚酯(DFMA)、甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)为原料,用半连续种子乳液聚合法制备纳米ZnO/有机氟改性聚丙烯酸酯,探索了合成工艺,然后将合成乳液用于亚麻织物的整理。采用FT-IR、XPS和SEM等方法对乳胶膜和整理后的织物进行表征分析。结果表明:当乳化剂质量分数为4%,引发剂质量分数为1.5%,反应温度为80℃,保温时间为60 min时,乳液的合成效果最好。合成的乳液具有良好的抗紫外性能,其乳胶膜的吸水率为8.64%。XPS和SEM测试结果显示,合成的复合乳液和织物相结合,提高了亚麻织物的疏水性。相比聚丙烯酸酯整理后的织物,经复合乳液整理后的亚麻织物对水的接触角提高了60.4°。     

Effects of monomer compatibility on sizing properties of feather keratin-g-P(AA-co-MA)

In order to endow feather keratin with good sizing properties for all-polyester or high-polyester yarns, methyl acrylate (MA) and acrylic acid (AA) monomers with a variation in feed molar ratio from 10/90 to 30/70 were grafted onto the molecular chains of native feather keratin under equal monomer concentration. Effects of monomer compatibility of MA/AA on sizing properties of the feather keratin-g-P(AA-co-MA) were studied in terms of apparent viscosity, contact angle of sizing paste on polyester fibers, mechanical properties of sizing film, and adhesion to polyester fibers. It was found that grafting MA & AA monomers with rational compatibility onto the molecular chains of feather keratin was an effective method to improve sizing properties of grafted feather keratin, such as adhesion to polyester fibers and toughness of sizing film. In view of overall performance of the grafted feather keratin sizes, the appropriate feed molar ratio of MA/AA should be 20/80.     

Facile synthesis of a castor oil-based hyperbranched acrylate oligomer and its application in UV-curable coatings

Fabrication and performance of the castor oil (CO)-based hyperbranched acrylate (C20AA) UV-curable coatings are highlighted in this work. Herein, C20AA was obtained through a facile reaction of a castor oil-based hyperbranched polyol (C20) with acrylic acid. FT-IR and ¹H NMR spectra confirmed the synthesis of the target C20AA. Subsequently, the as-prepared C20AA was employed for crosslinking a commercialized linear polyurethane acrylate (PUA) UV-curable oligomer. Specifically, by varying the content of C20AA over the range of 0, 20, 40, and 60 wt%, a series of UV-curable coatings were prepared and coded as C20AA-0, C20AA-20, C20AA-40, and C20AA-60, respectively, which were further cured under UV irradiation. The effect of C20AA loadings on the UV-curing efficiency and final polymer performance were investigated. Consequently, the tensile strength, Shore D hardness, pencil hardness, gel content, water resistance, and glass-transition temperature of the UV-cured coatings were greatly improved upon the addition of C20AA. Impressively, with the incorporation of 40 wt% C20AA, the resultant UV-cured coating exhibited highest double bond conversion, superior chemical resistance, and good flexibility. Additionally, all of the coatings showed outstanding transparency and good surface microstructures.     

聚甲基丙烯酸酯/聚丙烯酸酯共混纤维膜制备及其油水分离性能

为实现水污染体系中油水的高效分离,采用溶液聚合法合成丙烯酸丁酯-甲基丙烯酸羟乙酯共聚物、甲基丙烯酸丁酯-甲基丙烯酸羟乙酯共聚物,以共混溶液为纺丝液,采用静电纺丝技术制备得到可用于分离不同油水混合物的微结构可调的纤维膜材料,并研究其对不同油水混合物的分离能力。结果表明:2种共聚物溶液以体积比为3∶7共混后制得的纤维膜对柴油/水、葵花籽油/水混合物的分离效果显著;针对上述2种油水混合物,重复使用共混纤维膜5和7次时,共混纤维膜对2种油水混合物的分离时间分别低于390、110 s;将四氢呋喃引入上述共混溶液继续调节静电纺纤维膜的微结构,所得纤维膜可快速将高黏度乳化油从水中分离出来。     

自交联水性聚氨酯-含氟丙烯酸酯乳液的制备及研究

以异佛尔酮二异氰酸酯(IPDI)、聚碳酸酯二醇(PCDL)、二羟甲基丁酸(DMBA)、1,4-丁二醇(BDO)、甲基丙烯酸羟乙酯(HEMA)为原料合成了双键封端的聚氨酯预聚体;以N-羟乙基丙烯酰胺(HEAA)作交联剂,配合甲基丙烯酸六氟丁酯(HFBMA)等单体进行乳液共聚,制备了自交联水性聚氨酯-含氟丙烯酸酯(FPUA)乳液。研究了HFBMA和HEAA用量对膜耐水性、热性能以及力学性能的影响。结果表明:PUA乳液的耐水性和疏水性随HFBMA用量的增加而增加;随着HEAA用量增加,胶膜的热稳定性增加,拉伸强度增加,伸长率下降;当胶膜中HFBMA质量分数为12%,且HEAA质量分数为2.6%时,乳液的粒径为128 nm,乳液的稳定性较好;胶膜的水接触角为107.6°,吸水率为4.5%,拉伸强度为25.6 MPa,断裂伸长率为268%,10%热失重温度299.6℃。     

Alkoxyl side-chain effects of acidic ionic liquids catalysts for the esterification of n-butyl butyrate

Three kinds of alkoxy group-functionalized acidic ionic liquids (ILs) are reported in this work, namely, 1-(methoxyethyl)-3-methylimidazolium hydrogen sulphate [MOE-MIM]HSO₄, 1-(ethyoxyethyl)-3-methylimidazolium hydrogen sulphate [EOE-MIM]HSO₄, and 1-(propyoxyethyl)-3-methylimidazolium hydrogen sulphate [POE-MIM]HSO₄. The short side chain on the cation of [MOE-MIM]HSO₄ decreases the solubility of the IL in butanol and butyric acid and facilitates the separation of the IL from a reaction medium. The yield of butyl butyrate is up to 99.5%. After 10 rounds of recycling, the catalytic performance of [MOE-MIM]HSO₄ shows no significant changes.     

起泡剂对铜硫铁矿的浮选效果试验研究

针对冬瓜山铜硫铁矿的矿石性质,用几种不同起泡剂进行了优先浮铜、磁尾选硫的选矿试验,试验研究结果表明,MIBC(甲基异丁基甲醇)和丁基醚醇具有起泡性能好,泡沫层厚度高,用量少等特点,可取得较好的选矿指标,对于优先浮铜作业,使用丁基醚醇作起泡剂时选别效果最好,药剂成本最低;对于磁尾选硫作业,使用MIBC作起泡剂可取得较好的选矿指标,同时单位药剂成本最低。