Effects of different metal corrosion inhibitors on hydrogen suppression and film formation with Mg–Zn alloy dust in NaCl solutions

To improve the safety of wet dust removal systems for processing magnesium-based alloys, a new method is proposed for preventing hydrogen generation. In this paper, hydrogen generation by Mg–Zn alloy dust was inhibited with six common metal corrosion inhibitors. The results showed that sodium dodecylbenzene sulfonate was the best hydrogen inhibitor, while CeCl₃ enhanced hydrogen precipitation. The film-forming stability of sodium dodecylbenzene sulfonate was tested with different contents, temperatures, Cl^? concentrations and perturbation rates. The results showed that this inhibitor formed stable protective films on the surfaces of Mg–Zn alloy particles, and adsorption followed the Langmuir adsorption model.     

基于K-means和SOM的水下传感器数据采集方法

随着海洋资源勘探和海洋污染物监控工作的开展，水文数据的监测和采集等已经成为重要的研究方向。其中，水下无线传感器网络在水文数据采集过程中起着举足轻重的作用。本文研究的是水下无线传感器二维监测网络模型中，传感器节点数据采集的问题，其设计方法是通过自组织映射（Self-organizing mapping，SOM）对传感器节点进行路径最优化处理，结合优化的路径图形和K-means算法找到路径内部聚合点，利用聚合点和传感器的节点得到传感器通信半径内的数据采集点，最后通过SOM得到水下机器人（Autonomous underwater vehicle，AUV）到各个数据采集点采集数据的最优路径。经过实验验证，在水下1 200 m×1 750 m范围内布置52个传感器节点的情景下，数据采集点相比于传感器节点路径规划采用相同的采集顺序得到的路径优化了6.7%；对数据采集点重新进行自组织路径规划得到的路径比传感器结点路径的最优解提高了12.2%。增加传感器节点的数量，其结果也大致相同，因此采用该方法可以提高水下机器人采集数据的效率。     

载气热提取法测定熔敷金属中扩散氢收集条件的探究

探究了GB/T 3965—2012《熔敷金属中扩散氢测定方法》中载气热提取法收集条件对测定扩散氢含量的影响,并与水银法进行了对比。研究结果表明,样本炉温设定为400℃,A型试块的内部温度大约在51 min时稳定在358℃左右,B型试块内部温度大约在27 min时稳定在391℃左右;载气热提取法电信号曲线收集结束点的电信号及斜率均接近0时获得的结果与水银法具有较好的一致性。     

于都黄麟-祁禄山地区土地质量地球化学评价

通过对于都县黄麟-祁禄山地区开展1:5万土地质量地球化学调查,在野外土壤样品采集和化验测试的基础上,系统地研究了影响土地质量的各项地球化学指标特征与控制因素,基本查明有益元素、重金属元素分布,划分出重点污染区和绿色土地发展区,并进行土地质量等级评价,为永久基本农田建设、土地资源开发与利用等方面提出建议。     

吸尘袋纸透气度和耐破度的影响因素研究

研究了纤维特性、打浆度、化学纤维用量、原纸紧度、浆内添加增强剂及表面施胶等因素对吸尘袋纸透气度和耐破度的影响规律。结果表明,降低浆料打浆度,能有效提高吸尘袋纸原纸透气度,浆料的打浆度从10～11°SR降低至8～9°SR时,原纸的透气度提高53%以上;随着化学纤维用量的增加,原纸透气度呈上升趋势,当化学纤维用量达15%时,原纸透气度比不加化学纤维的透气度增加108%,但通过降低打浆度来减少化学纤维用量,是性价比较优的方案;将原纸紧度由0.3 g/cm~3提高到0.4 g/cm~3,吸尘袋纸原纸的耐破度提高45%～55%;表面施胶量约5 g/m~2时,吸尘袋纸的耐破度比原纸提高80%～110%。     

轨道式垃圾回收机器人设计与分析

针对高速公路高峰期拥挤产生的垃圾等问题,设计一种轨道式垃圾回收机器人,由光伏发电装置、机器人壳体、末端手爪、关节臂以及控制系统等组成,主体结构采用双臂三关节结构,采用西门子PLC控制系统,通过控制关节臂的旋转以及偏转、末端手爪的旋转及开合等动作来实现工作的目的。结合外场作业的特殊性,采用光伏能源装置,对其结构及控制系统进行设计,通过对机器人进行三维建模、运动和控制仿真分析,验证系统的可行性及有效性。     

Study of using a multi-touch tabletop technology to facilitate collaboration,interaction, and awareness in co-located environment

This study aimed to evaluate how differently co-located users perform and interact while solving problems by using existing and newly developed interaction mechanisms of a multi-touch tabletop system on a large-size tabletop display. Furthermore, this study aimed to investigate users’ perceived situation awareness due to the system. This study conducted one experiment and introduced three newly developed interaction mechanisms: two-way rubber band, drag-and-response, and centre collection area. Two-way rubber band enables users not only to send but also to request digital objects. Drag-and-response allows users to accept or to reject digital objects sent by others; therefore, it eliminates conflicting situations and interference. Centre collection area stores, organises, and manages shared digital resources on a surface of a tabletop display, so that users have an overall picture of available resources. This paper discusses results of an experiment, research findings, and implications along with conclusions and several suggestions for future development and research.     

Data collection mode effect on feeling thermometer questions: A comparison of face-to-face and Web surveys

Feeling thermometer questions are widely used in political science research to estimate people’s attitudes and feelings toward a political object, like a political figure or an organization. Given the popularity of the feeling thermometer question in population surveys, more work is needed to explore the measurement of this question type. This study examines the data collection mode effect on feeling thermometers. Using the 2012 American National Election Studies, we find that the measurement of feeling thermometers is not exactly comparable between face-to-face and Web surveys. Face-to-face respondents tend to provide warmer feelings, while Web respondents give relatively more reliable responses in comparison. In both survey modes, respondents are most likely to select the response options that are verbally labeled although the effect is more striking in face-to-face than Web survey. The item nonresponse between these two modes does not differ in a meaningful way. This study ends by discussing future research directions on feeling thermometer questions.     

电镀废水中的配位剂及其处理

配位剂是影响电镀废水稳定达标的主要因素之一。指出电镀废水应考虑其中所含配位剂的性质,从源头分类收集,采用氧化、水解、化学沉淀、生物等方法预处理。电镀废水治理的重点是重金属离子,难点是配位剂,关键是分类收集。     

Collection efficiency of liquid‐based samplers for fungi in indoor air

This study assessed the collection efficiency (CE) of two popularly used sampling devices (BioSampler and Coriolis sampler) for fungal aerosols. Phosphate‐buffered saline (PBS) supplemented with or without surfactant (Tween‐20, Tween‐80, or Triton X‐100) and antifoam agent was prepared and used as collection liquids. The agar impactor (BioStage) was simultaneously operated with liquid‐based samplers to collect fungi from seven sites located at a university building, public library, and animal farming. Fungal concentrations determined by liquid samplers were divided by those by BioStage, and the ratio values represented CE. Results indicate that the CE of BioSampler was superior to that of Coriolis (P = 0.0001) and the PBS containing surfactant collected fungi better than that without surfactant (P < 0.0001), whereas antifoam agent showed no influence (P = 0.8). Moreover, fungal concentrations determined by BioSampler with surfactant‐added PBS were statistically indifferent from those by BioStage (P > 0.05) with a Spearman correlation coefficient of 0.81‐0.83 (P < 0.01). In addition to sampler and collection liquid, sampling location was also identified as a significant CE factor (P = 0.006), implying potential influences by fungal genera in the studied fields. Overall, BioSampler with surfactant‐supplemented PBS (eg, Triton X‐100) is recommended considering the great CE and compatibility with a variety of analytical assays.