Effects of Surface Morphology and Composition Modification on Spectral Emissivity and Thermal Diffusivity Profile at High Temperatures

A new all-spectroscopic method for depth-resolved thermal diffusivity measurement of metallic specimens has been demonstrated. The method entails measurement of the mass entrained into a laser-produced plasma (LPP) plume in such a manner that the plume is representative of the specimen in elemental composition. Both the abundance of matter and its elemental composition are measured by time-resolved spectroscopy for each LPP plume. In order to delineate the morphology versus composition basis of the depth dependence, a new study on a Nichrome ribbon specimen heated by ohmic heating in a vacuum is presented. A set of depth-resolved thermal diffusivity measurements is carried out, while noting the attendant changes in the spectral emissivity and elemental composition at succeeding ablation layers. Additional measurements are carried out after the specimen has been treated under varying heating conditions. Preferential diffusion of chromium at high temperatures has been found to contribute to the dynamics of surface thermophysical properties at high temperatures. Representative LPP ablation is well suited for removal of surface impurities prior to thermophysical property measurements by the pulse heating technique.     

高发射率节能涂料及其应用

讨论了高发射率涂料节能的条件，了一种在1000℃仍保持高发射率的优质涂料，并解决了涂料与金属基体的粘结工艺，用此涂料制成增强辐射电阻带和复合炉衬，得到的新炉比旧炉节能20－40％。     

低发射率材料红外法向发射率谱测量方法的研究

采用热管技术研制了材料发射率谱的专用测量附件;利用双温测量技术,在P-E983型红外分光光度计及3600型数据站上进行了较低温度下低发射率材料红外法向发射率谱测量方法的研究.实测了几种材料的发射率谱;讨论了影响测量误差的诸因素.     

Experimental investigation of the normal spectral emissivity and other thermophysical properties of pulse-heated Ni-Ti and Au-Ni alloys into the liquid phase

1. Introduction Metal working industry needs accurate thermo- physical properties of liquid metals and alloys as input data for different simulation routines to im- prove the performance of their products. Within this paper we continue the systematic investigation of the dependence of emissivity of binary alloys on the relative concentration of the constituent elements (for a previous paper see [1]). 2. Experimental method A fast ohmic pulse heating technique is applied to heat metallic wire-s…     

A hemispheric division of labor aids mental rotation.

In the present study, we investigated whether a hemispheric division of labor is most advantageous to performance when lateralized inputs place unequal resource demands on the left and right cerebral hemispheres. In each trial, participants decided whether 2 rotated letters, presented either in the same visual field (within-field trials) or in opposite visual fields (across-field trials), were both of normal orientation, or whether one was normal and the other was mirror-reversed. To discriminate a letter's orientation, one must rotate the letter to the upright position. Therefore, we manipulated whether the two letters imposed similar or dissimilar demands on cognitive resources by varying the number of degrees that each letter needed to be rotated to reach the upright position. As predicted, in 2 experiments we found that the across-field advantage increased as the number of degrees each letter needed to be rotated became more dissimilar. These findings support a current model of hemispheric interactions, which posits that an unequal hemispheric distribution of cognitive load allows the cerebral hemispheres to take the lead for different aspects of cognitive processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

海表面盐度卫星微波遥感研究进展

海表面盐度SSS(Sea Surface Salinity)是研究大洋环流和海洋对全球气候影响的重要参量、是决定海水基本性质的重要因素之一。卫星微波遥感可以满足盐度研究过程中大范围、连续观测的需要,国际上统一的认识是选择频率为1.413 GHz的L波段作为盐度遥感的首选波段。目前,国外发展的海面盐度微波遥感反演算法主要有两种:基于海表发射率估算海表盐度的算法和基于贝叶斯定理提出的反演算法。影响盐度反演精度的因素主要有太空辐射、电离层法拉第旋转、大气、海面粗糙度等。其中,海面粗糙度对盐度反演影响很大,海面粗糙度处理模型可以分为3大类:理论算法(间接发射率模型、直接发射率模型)、经验算法、半经验半理论算法(Hollinger 半经验模型、WISE半经验模型、Gabarró模型)。SMOS卫星和Aquarius/SAC\|D卫星的成功发射,将海表面盐度遥感的反演精度控制在0.2 psu以内,通过改进反演算法,有望得到更高的反演精度。     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

La3+ 掺杂对 CeO2 红外发射性能的影响研究

随着飞行器飞行速度和发动机燃烧室温度的提高, 金属类隐身涂层材料已无法满足环境使用要求。 CeO2 具有较高熔点、 抗氧化、 较低红外发射率等特点, 被认为是红外隐身应用的候选材料, 但其发射率仍无法满足 高温红外隐身需求。 本文通过固相反应法对 CeO2 进行 La3+ 掺杂改性, 研究掺杂量对 CeO2 粉体红外发射性能的 影响规律。 结果表明, 随着掺杂量从 10 mol% 增加到 30 mol%, 粉体在 3~6 μm 波段的发射率不断降低, 其中 Ce0.7La0.3O2 的红外发射率仅为 0.1。     

光纤黑体腔高温传感器感温腔体的ANSYS分析

为了提高光纤黑体腔式高温传感器感温腔体的辐射性能,使腔体接近于理想黑体辐射状态,计算了腔体的有效发射率。基于ANSYS有限元方法对感温腔进行热辐射分析,讨论了腔底的形状、腔体温度、腔长、材料表面发射率、腔体的不等温分布对有效发射率的影响关系。结果表明,有效发射率会随着腔长的增加而增大,但会存在一个饱和值。同时当腔体处于非等温时,有效发射率随非等温程度近似呈直线下滑。综合分析结果,可以得出感温腔的优化构造参数,对传感器的制作以及提高传感器的测温准确性、分辨力和灵敏度有指导意义。     

脉冲加热方法铌热物性参数的动态测量

提出积分球反射法脉冲加热技术测量材料热物性的方法,研制的脉冲加热瞬态热物性测量装置能同时测量铌带状试样温度范围在1100-2700K的比热容、电阻率、全波长半球发射率.装置中高速高温计测量试样的辐射温度,积分球反射计测量试样的法向光谱发射率,即可得出带状试样的真实温度.再通过测得的试样上的电压、电流等数据经计算获得其他热物性参数.对国外的标准铌试样进行了测试,所得测量数据与国外同行数据进行了比对,具有较好的一致性.实验结果表明:比热容测量不确定度为5%,全波长半球发射率测量不确定度为3.5%,电阻率的测量不确定度为3.6%,测量数据可作为航天、军事和民用领域材料应用的设计依据.