磁性纳米材料Fe3O4-RGO-NH2对Ag+的吸附性能研究

采用一步溶剂热法成功制备了新型磁性纳米吸附剂Fe3O4-RGO-NH2,用透射电子显微镜(TEM)、X射线衍射(XRD)、振动样品磁力计(VSM)及Zeta电势对其形貌及晶型结构进行了表征,研究了Fe3O4-RGO-NH2纳米吸附剂对水溶液中Ag⁺的吸附性能。结果表明,水溶液pH值对Ag⁺吸附具有很大影响,pH=4.0时吸附效果最佳。Ag⁺最大吸附量随着初始浓度及吸附时间的增加而增加,Ag⁺的吸附符合准二级动力学模型。     

Cobalt ferrite nanoparticles prepared by microwave hydrothermal synthesis and adsorption efficiency for organic dyes: Isotherms,thermodynamics and kinetic studies

Magnetic nanoferrites (MFe₂O₄, M = Co, Ni) were successfully synthesised through microwave-hydrothermal route, characterised and used for adsorption of Eriochrome Black T (EBT) and Bromophenol Blue (BRB) dyes from their aqueous solution. The powder XRD patterns confirmed the formation of cubic spinel structure for both the ferrites. Under identical conditions, the adsorption efficiency of CoFe₂O₄ was found relatively higher than the corresponding NiFe₂O_4. Further characterisations revealed that CoFe₂O₄ sample was nearly spherical in size (8–9 nm) with narrow size distribution. The sample showed superparamagnetic behaviour with saturation magnetization (M_s) value (66.4 emu/g). BET surface area calculated for the synthesized cobalt ferrite as 70.9 m²/g. Batch adsorption experiments as a function of initial dye concentration, pH, contact time and adsorbent dose showed the adsorption of dyes depends on pH. Equilibrium adsorption data were well explained by both Langmuir and Freundlich isotherm models. The maximum monolayer adsorption capacities (Q_o) were found to be 82.6 and 25.6 mg/g for EBT and BRB dyes, respectively. Kinetics of the adsorption was best described by pseudo-second-order model. Various thermodynamic parameters such as ΔG, ΔH and ΔS derived from adsorption data over the temperature range 20–50 °C, accounted for a favourable, spontaneous, endothermic physisorption process. The materials showed potential for repeated use without significant decrease in adsorption capacity after proper regeneration.     

Characteristic of a novel composite inorganic polymer coagulant-PFAC prepared by hydrochloric pickle liquor

A novel magnetic nano-adsorbent has been developed by the covalent binding of polyacrylic acid (PAA) on the surface of Fe(3)O(4) nanoparticles and the followed amino-functionalization using diethylenetriamine (DETA) via carbodiimide activation. Transmission electron microscopy image showed that the amino-functionalized Fe(3)O(4) nanoparticles were quite fine with a mean diameter of 11.2+/-2.8 nm. X-ray diffraction analysis indicated that the binding process did not result in the phase change of Fe(3)O(4). Magnetic measurement revealed they were nearly superparamagnetic with a saturation magnetization of 63.2 emu/g Fe(3)O(4). The binding of DETA on the PAA-coated Fe(3)O(4) nanoparticles was demonstrated by the analyses of Fourier transform infrared (FTIR) spectroscopy and zeta potential. After amino-functionalization, the isoelectric point of PAA-coated Fe(3)O(4) nanoparticles shifted from 2.64 to 4.59. The amino-functionalized magnetic nano-adsorbent shows a quite good capability for the rapid and efficient adsorption of metal cations and anions from aqueous solutions via the chelation or ion exchange mechanisms. The studies on the adsorption of Cu(II) and Cr(VI) ions revealed that both obeyed the Langmuir isotherm equation. The maximum adsorption capacities and Langmuir adsorption constants were 12.43 mg/g and 0.06 L/mg for Cu(II) ions and 11.24 mg/g and 0.0165 L/mg for Cr(VI) ions, respectively.     

Versatile Magnetic Mesoporous Carbon Derived Nano-Adsorbent for Synchronized Toxic Metal Removal and Bacterial Disinfection from Water Matrices

Contamination of water resources by toxic metals and opportunistic pathogens remains a serious challenge. The development of nano-adsorbents with desired features to tackle this problem is a continuously evolving field. Here, magnetic mesoporous carbon nanospheres grafted by antimicrobial polyhexamethylene biguanidine (PHMB) are reported. Detailed mechanistic investigations reveal that the electrostatic stabilizer modified magnetic nanocore interfaced mesoporous shell can be programmatically regulated to tune the size and related morphological properties. The core–shell nano-adsorbent shows tailorable shell thickness (≈20–55 nm), high surface area (363.47 m² g⁻¹), pore volume (0.426 cm³ g⁻¹), radially gradient pores (11.26 nm), and abundant biguanidine functionality. Importantly, the nano-adsorbent has high adsorption capacity for toxic thallium (Tl(I) ions (≈559 mg g⁻¹), excellent disinfection against Staphylococcus aureus and Escherichia coli (>99.99% at 2 and 2.5 µg mL⁻¹), ultrafast disinfection kinetics rate (>99.99% within ≈4 min), and remarkable regeneration capability when exposed to polluted water matrices. The Tl(I) removal is attributed to surface complexation and physical adsorption owing to open ended mesopores, while disinfection relies on contact of terminal biguanidines with phospholipid head groups of membrane. The significance of this work lies in bringing up effective synchronic water purification technology to combat pathogenic microorganisms and toxic metal.