往复活塞式压缩机活塞杆温度高故障分析及改造

针对2台2D40型空气压缩机在实际试机过程中,活塞杆温度过高,导致连锁报警,压缩机不能正常工作的问题进行了详细的故障原因分析;对压缩机技术性能参数进行介绍;对压缩机的损伤情况进行说明并找到改造方案,解决机组运行中活塞杆温度过高的问题,从而提高机组的运行效率,使机组运行安全、稳定。     

全自动剥锌机振打机理分析与试验研究

根据全自动剥锌机组在工业生产上的使用情况,通过分析其振打设备中活塞钎杆模型的振打机理,分析振打锤敲击阴极板面的应力传递关系,初选振打锤基本参数,重新设计振打设备。通过工业试验,采用单因素控制变量法,试验分析振打次数、气压压强、锤心至锌片上边缘的距离,以及这三个因素对振打效果的影响。结果可为今后同类型设备的优化设计提供参考和依据。     

基于液压活塞式惯容器的车辆悬架性能研究

阐述了液压活塞式惯容器的基本结构、工作原理与承载力大的特点，建立了考虑摩擦力、寄生阻尼力和油液弹性效应的惯容器非线性力学模型。在数控液压伺服激振台上对液压活塞式惯容器进行了力学性能试验，基于试验结果，利用Matlab参数辨识工具箱对非线性力学模型中的参数进行辨识。在此基础上建立了包含液压活塞式惯容器非线性因素的车辆惯容器 弹簧 阻尼器（inerter-spring-damper，简称ISD）悬架动力学模型并进行了仿真分析。结果表明，当考虑液压活塞式惯容器非线性因素时，车辆ISD悬架系统的车身加速度均方根值增加5%，而轮胎动载荷与悬架动行程均方根值均有所减小,降低了车辆的行驶平顺性。     

Thermodynamic analysis of natural gas reciprocating compressors based on real and ideal gas models

The accurate modelling and investigating effects of various parameters of the reciprocating compressors are important subjects. In this work, based on first law of thermodynamics, conversation of mass and real and ideal gas assumptions, a theoretical analysis has been constructed to simulate natural gas reciprocating compressors. For computing the thermodynamic properties of natural gas based on real gas model, the AGA8 equation of state has been used. Numerical results validated with previous measured values and showed a good agreement. The effects of important parameters such as: angular speed, clearance and pressure ratio have been studied on the performance of the compressors. The results reveal the in-control volume temperature for ideal gas is more than real gas model but the mass flow rate and work for real gas is higher than ideal gas model. On the other hand, the indicated work that required for compression is greater for ideal gas model.     

往复式活塞压缩机中间喷液制冷系统的(火用)分析

通过对往复式活塞压缩机进行改造，在单级活塞压缩系统的基础上搭建了一种中间喷液冷却的准两级压缩系统并在蒸发温度为-20 ℃的工况下进行实验测量，根据实验数据对单级活塞压缩系统和新型中间喷液冷却活塞压缩系统的COP、〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失和〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗效率进行计算。结果表明：加入中间喷液冷却系统后，系统的COP由1.27提升至1.36，单位制冷量由155.1 kJ/kg提升至176.7 kJ/kg；单级活塞压缩系统〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失较大的部分是压缩机和膨胀阀，分别占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的16.2%和14.8%，加入中间喷液冷却系统后压缩机部分的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失明显降低，仅占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的3.6%，冷凝器及膨胀阀的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损比也有所下降。     

分层反压注射成型厚壁光学透镜的工艺分析

为了研究反压压力对成型厚壁光学透镜的影响，利用自行开发的分层反压注射成型厚壁光学透镜的实验方案，通过正交实验优化设计开展了工艺参数优化实验，研究了在不同分层方式下内外层反压压力对对厚壁光学透镜光学性能的影响，从而根据正交优化参数组合成型具有优异光学性能的理想厚壁光学透镜。 正交实验研究结果表明，使用聚甲基丙烯酸甲酯（PMMA）为厚壁光学透镜的原材料进行分层反压注射成型，能够有效减少厚壁光学透镜收缩率，同时随着内外层反压压力的提高，厚壁光学透镜的透光率和折射率均不同程度的得到提高，透镜光学性能优异。     

基于ANSYS Workbench柱塞泵主轴动、静态性能分析

主轴是液压泵的重要零件之一,起着传递扭矩的作用,对液压泵的性能有着重要的影响。运用ANSYS Workbench对某型开式回路斜盘式柱塞变量泵的主轴进行动、静态性能分析,主要对柱塞泵主轴进行静力分析和模态分析,得到相关参数,并对主轴进行了一定的优化。为该类主轴的设计和优化提供一定的参考。     

内燃机活塞环表面处理技术

活塞环在内燃机中有着支撑、密闭、储油、导热的作用,内燃机活塞环制备材料应该具备优良的加工性能、耐高温、耐腐蚀、导热性好且具有良好的强韧性,较好的与气缸材料表面的磨合性能。球墨铸铁和专用钢材已经成为制备内燃机活塞环的基础材料,目前国内外采用多种表面处理技术比如:镀铬、氮化、PVD与CVD镀膜、喷钼、喷涂陶瓷层等表面处理工艺进行表面改性,提高内燃机活塞环的使用寿命和使用性能。需要不断研究和开发新的内燃机活塞环的表面处理技术来满足实际生产和应用中内燃机越来越高的要求。     

A novel adaptive convolutional neural network for fault diagnosis of hydraulic piston pump with acoustic images

As an essential part of hydraulic transmission systems, hydraulic piston pumps have a significant role in many state-of-the-art industries. Thus, it is important to implement accurate and effective fault diagnosis of hydraulic piston pumps. Owing to the heavy reliance of shallow machine learning models on the expertise and experience of engineers, fault diagnosis based on deep models has attracted significant attention from academia and industry. To construct a deep model with good performance, it is necessary and challenging to tune the hyperparameters (HPs). Since many existing methods focus on manual tuning and use common search algorithms, it is meaningful to explore more intelligent algorithms that can automatically optimize the HPs. In this paper, Bayesian optimization (BO) is employed for adaptive HP learning, and an improved convolutional neural network (CNN) is established for fault feature extraction and classification in a hydraulic piston pump. First, acoustic signals are transformed into time–frequency distributions by a continuous wavelet transform. Second, a preliminary CNN model is built by setting initial HPs. The range of each HP to be optimized is identified. Third, BO is employed to select the optimal combination of HPs. An improved model called CNN-BO is constructed. Finally, the diagnostic efficiency of CNN-BO is analyzed using a confusion matrix and t-distributed stochastic neighbor embedding. The classification performance of different models is compared. It is found that CNN-BO has a higher accuracy and better robustness in fault diagnosis for a hydraulic piston pump. This research will provide a basis for ensuring the reliability and safety of the hydraulic pump.     

内燃机钢制活塞焊接的研究现状

文中分析了内燃机活塞选用钢作原材料、焊接作为连接方法的优点,并概括叙述了摩擦焊、激光-电弧复合焊、真空钎焊在钢制活塞焊接中的探索及应用。焊接式钢制活塞在结构钢度、热效率、经济环保等方面有所提高,且造成的噪声污染较小,从而具有更广阔的发展前景。文中通过分析在3种不同焊接方法下活塞的结构、接头强度、微观组织,总结得出摩擦焊最大问题在于飞边和尺寸,激光复合焊在机械化生产上存在生产成本的问题,而真空钎焊接头在强度及生产效率方面仍需进一步的改善。