气力输送在烧结电除尘输灰系统中的应用

针对烧结厂烧结电除尘灰的工况特性，介绍了输送烧结电除尘灰的正压气力输灰系统的特点、组成，还对在调试和试运行过程中遇到的故障进行了分析并制订了解决措施。     

An Experimental Investigation into the Feed Rate Capacity of Rotary Valve and Blow Tank Feeders

Industry widely uses rotary valves and blow tanks for the pneumatic conveying of products, each having their pros and cons depending on the specific application. This article shows the differing results obtained when low-velocity conveying a product through a common pipeline using both a drop-through rotary valve and a bottom-discharge blow tank feeder. A number of issues arise in the rotary valve system, the main one being rotary valve air leakage. A blow tank system, on the other hand, does not leak, as it is an enclosed system. The experimental results show dramatic differences in product throughput. Further exploration leads to a novel modification being made to the rotary valve system in an attempt to increase its capacity. The result of this modification shows a slight increase in output tonnage, but still significantly less than that obtained from the blow tank.     

颗粒状物料气力输送系统中输料管的连接方式

对颗粒状物料的气力输送 ,人们往往只重视所要采用的输送方式 ,而忽视了输料管连接方式的正确选择、施工与安装。输料管连接方式的正确与否 ,直接影响到输送量和物料的品质。详细介绍了常用的几种连接方式 ,分析了它们的优缺点 ,并提出了比较合理的连接方式     

三(明)钢烧结厂电除尘灰的气力输送

三钢烧结厂130m^2烧结机电除尘输灰首次采用了气力输送系统。该系统由气源、输送、管路、灰库及控制五部分组成，本文介绍了系统的工作原理及运行调试情况。系统投产后，运行平稳，达到了设计要求。     

气动锚杆钻机冲击频率测量仪的设计

针对气动锚杆钻机冲击频率不易测量的问题,提出了一种新型气动锚杆钻机冲击频率测量仪的设计方案。该测量仪采用压力传感器采集钻机冲击信号,采用电压比较器和单稳态触发器处理冲击信号并输入到单片机,由单片机计算出钻机冲击频率。实际应用表明,该测量仪可准确、方便地测量出钻机冲击频率。     

面向对象的液压与气压回路工作原理仿真软件开发

详细介绍了用于液压与气压传动课程教学的“面向对象的液压与气压回路工作原理仿真软件”的开发，该软件采用VB6．0、AutoCAD及Microsoft Visio在Win2000操作系统上开发而成，采用了面向对象的建模技术，实现了液压与气压原理图的自动识别及工作原理仿真。     

气动逻辑元件在多气缸顺序动作气压控制回路中的应用

以三坐标气动机械手为例子来说明气动逻辑元件在多气缸顺序动作的气压控制回路中的应用，从而使得气动控制回路的设计变得简单明了。     

三聚氰胺粉料后处理工艺技术改造

经过技改后的三聚氰胺粉料后处理工艺，克服了以往采用螺旋输送机冷却和正压输送工艺所带来的工作环境恶劣、产品因温度较高而不易包装、机械故障频繁等许多难以解决的问题。改用吸送式气力输送后处理工艺后，既能输送，又能冷却、提纯三聚氰胺，实现自动化包装，并彻底改善工作环境。     

气刀操作条件对聚丙烯密相脉冲气力输送行为的影响

在一管线水平长１９ｍ、垂直长１１ｍ、内径５０ｍｍ的密相脉冲气力输送实验台上进行了气刀操作条件对管道输送行为影响的实验研究．结果表明：气刀操作条件对管道输送气速、输送能力、固气比、能耗等均有明显影响．确定最佳的气刀操作条件需综合考虑发送压力、输送结构、物料物性等因素．     

Tactile display with tangential and normal skin displacement for robot-assisted surgery

This paper proposes a tactile display providing both shear and normal feedback to the fingertip for generating three-axis tactile feedback during teleoperation of a surgical robot. The display is composed of five balloons actuated by controlling the pneumatic pressure. The implemented display is 18?mm?×?18?mm?×?15?mm. This size is suitable for mounting the display onto the master controls of a surgical robot. The maximum normal and shear displacements are 2 and 1.3?mm, respectively. The proposed tactile display may provide perceivable stimuli to a human finger pad in all five directions: normal, distal, proximal, radial, and ulnar. This paper also reports on the results of psychophysical measurement of the minimum perceivable movement of the developed tactile display for each of the five directions.