Synthesis and luminescence properties of reddish-orange-emitting Ca2GdNbO6:Sm3+ phosphors with good thermal stability for high CRI white applications

Novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors based on the emission of ⁴G_5/2 → ⁶H_9/2 transition at 651 nm with the chromatic coordinate of (0.633, 0.366) were synthesized. The crystal structure and chemical purity were identified in detail. Under the 407 nm excitation, the optimum concentration of Sm³⁺ ion was found to be 5 mol% dominated by the dipole-dipole interaction in the Ca₂GdNbO₆ host material. The color purity of the sample with optimum doping was estimated to be about 78.38%. Besides, the thermal stability was also studied, and it was further found that the emission intensity remained 65.32% at 423 K. The packaged white LED device exhibited excellent CRI and CCT values of 92.43 and 4896 K. Finally, the polydimethylsiloxane film with a stable structure and flexible property was prepared. These above results reveal that novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors can be applied in high CRI white communication and flexible display applications.     

基于化学监督的超(超)临界机组关键控制节能指标分析及建议

针对超(超)临界机组参数提高、材质升级,化学技术监督中的监督指标对机组经济性和可靠性影响较大的问题,本文通过机组典型案例分析、技术监督报告、现场实测等,对目前化学监督中影响较大的、关键的技术指标进行了系统性的分析研究。研究结果找出了6项化学监督中超(超)临界机组关键的、影响较大的控制监督指标,且提出了指标控制值和控制方法。这项系统性研究分析方法对指导超(超)临界机组化学监督具有重要的借鉴作用,以控制超(超)临界机组因参数提高和材质升级带来的新问题和新挑战。     

Separators for alkaline water electrolysis prepared by plasma-initiated grafting of acrylic acid on microporous polypropylene membranes

Highly hydrophilic separators for alkaline water electrolysis were prepared by plasma-initiated grafting of acrylic acid on porous polypropylene (PP) membranes. The membranes were activated in a low-pressure radio-frequency discharge in oxygen and subsequently graft polymerization of acrylic acid was performed in aqueous solution. The membranes were characterized by gravimetric grafting degree (GD), SEM, FTIR, critical wetting surface tension (CWST) test, mechanical strength, and electrolytic conductivity. Moreover, the membranes were applied as separators in alkaline electrolysis cell, and content of hydrogen in the produced oxygen was measured to determine membrane permeability to hydrogen dissolved in the electrolyte. It was observed that increasing GD improves performance of membranes as separators in alkaline electrolysis, although the particular effects on the electrolytic conductivity and hydrogen permeability strongly depend on structure the of initial PP substrate. Ageing test conducted in 30 wt% KOH at 60 °C revealed that although considerable degrafting took place at beginning of the test, the remaining polyacrylic acid provided highly hydrophilic character to membrane for 7000 h of the test.     

An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

电子行业用高纯钯的制备研究

高纯钯在电子行业等领域应用广泛，需求迫切。以氯化钯为原料，提出采用氯化铵沉淀-氨水配合联合工艺净化钯溶液，水合肼还原纯净钯溶液制备高纯钯。结果表明，固体氯化钯溶解后，在合适的条件下，该钯溶液经过氧化-氯化铵沉淀、氨水配合有效去除杂质元素，获得纯净二氯四氨合钯溶液，再经水合肼还原后，获得纯度99.999%高纯钯，其碳、氧、氮等杂质元素总含量小于355×10^-6。     

高纯半绝缘SiC电阻率影响因素

采用物理气相传输(PVT)法进行高纯半绝缘SiC晶体生长,利用高温真空解吸附以及在系统中通入HCl和H2的方法,有效降低了系统中N、B和Al等杂质的背景浓度。使用二次离子质谱(SIMS)对晶体中杂质浓度测试,N、B和Al浓度分别小于1×1016、1×1015和2×1014 cm-3。对加工得到的晶片进行测试,全片的电阻率均在1×1010Ω·cm以上,微管密度小于0.02 cm-2,(004)衍射面的X射线摇摆曲线半高宽为34″。结果表明,该方法可以有效降低SiC晶体中N、B和Al等杂质浓度,提升SiC晶片的电阻率。使用该方法成功制备了4英寸(1英寸=2.54 cm)高纯半绝缘4H-SiC晶体。     

Nonlinear dynamic behaviors and control based on simulation of high-purity heat integrated air separation column

In this paper, the dynamic behaviors on the basis of simulation for high-purity heat integrated air separation column (HIASC) are studied. A nonlinear generic model control (GMC) scheme is proposed based on the nonlinear behavior analyses of a HIASC process, and an adaptive generic model control (AGMC) scheme is further presented to correct the model parameters online. Related internal model control (IMC) scheme and multi-loop PID (M-PID) scheme are also developed as the comparative base. The comparative researches are carried out among these linear and nonlinear control schemes in detail. The simulation research results show that the proposed AGMC schemes present advantages in both servo control and regulatory control for the high-purity HIASC.     

Low‐Temperature Chemical Synthesis of High‐Purity Diacylglycerols (DAG) from Monoacylglycerols (MAG)

A chemical method was developed for low‐temperature synthesis of DAG from MAG followed by an easy purification procedure in order to obtain high‐purity DAG. Solvent‐assisted and solvent‐free reaction conditions were used, combined with different catalysts (sodium methoxide, p‐toluenesulfonic acid, methanesulfonic acid, and sulfuric acid). All reactions were performed at 35 and 70 °C. By increasing both acidity and polarity of the catalyst the equilibrium shifts towards the formation of DAG. When using sulfuric acid in solvent‐assisted condition at 70 °C, 88 % conversion was obtained after 20 min of reaction (77 % w/w DAG in the reaction mixture after evaporation of the solvent). After purifying by means of column chromatography, 96 % pure DAG were obtained. The overall yield of DAG was 81 %.