Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

SiC is a promising functional ceramic material with many great properties. High concentrated SiC slurry with excellent rheology and stability is required in some processes of ceramic forming. In this work, the dispersion of SiC powders was obviously improved by ternary modifiers: γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560), sodium humate and sodium dodecyl sulfate (SDS). Modified SiC slurry showed the lowest viscosity of 0.168 Pa s at a solid content of 50 vol%. The maximum absolute value of zeta potential of SiC increased from 47.3 to 61.6 mV by modification. Sedimentation experiments showed that a highly stable suspension of modified SiC was obtained at pH 10. SiC green body with high density of 2.643 g/cm³ was prepared with modified powders by slip casting. X-ray photoelectron spectra (XPS) and thermogravimetry (TG) measurements indicated the adsorption of modifiers on SiC surface. Therefore, modified SiC powders could stably disperse in aqueous media due to the increase of electrosteric repulsion between particles. The novel strategy used in this study could further improve the dispersion of SiC powders.     

Manufacturing catalyst-coated membranes by ultrasonic spray deposition for PEMFC: Identification of key parameters and their impact on PEMFC performance

This study deals with the manufacturing of catalyst-coated membranes (CCMs) for newcomers in the field of coating. Although there are many studies on electrode ink composition for improving the performance of proton-exchange membrane fuel cells (PEMFCs), there are few papers dealing with electrode coating itself. Usually, it is a know-how that often remains secret and constitutes the added value of scientific teams or the business of industrialists. In this paper, we identify and clarify the role of key parameters to improve coating quality and also to correlate coating quality with fuel cell performance via polarization curves and electrochemical active surface area measurements. We found that the coating configurations can affect the performance of lab-made CCMs in PEMFCs. After the repeatability of the performance obtained by our coating method has been proved, we show that: (i) edge effects, due to mask shadowing - cannot be neglected when the active surface area is low, (ii) a heterogeneous thickness electrode produces performance lower than a homogeneous thickness electrode, and (iii) the origin and storage of platinum on carbon powders are a very important source of variability in the obtained results.     

Thermal properties of hierarchical YSZ and LZO ceramic microspheres with multi-scaled voids investigated by using theoretical,experimental and simulation methods

Heat transfer within ceramic feedstock powders is still unclear, which impedes optimization of the thermal and mechanical properties of the thermal sprayed coatings. The microspheres (yttria-stabilized zirconia YSZ and lanthanum zirconate LZO) were prepared via the electro-spraying assisted phase inversion method (ESP). The thermal properties of the two ESP microspheres and a commercial hollow spherical powder (HOSP) were investigated by using theoretical, experimental, and simulation methods. Thermal conductivity of the single microsphere was estimated via a novel nest model that was derived from the Maxwell-Eucken 1 and the EMT model. Thermal conductivity of a single YSZ/LZO-ESP microsphere prepared at 1100–1200 °C was within 0.36–0.75 W/m K, which was ～ 20 % lower than that of a single YSZ-HOSP microsphere with a similar porosity. Heat flux simulation showed that high tortuosity around the multi-scaled voids of the ESP microsphere led to a more efficient decrease in thermal conductivity compared with total porosity.     

纳米碳化钒/碳化铬复合粉末的微波辅助高能球磨合成及其应用

以微米级氧化钒(V2O5)、氧化铬(Cr2O3)和纳米碳黑为原料，采用机械合金化及微波辅助加热法制备了纳米碳化钒/碳化铬复合粉末。利用XRD、XPS、TG-DSC、SEM、TEM和BET对产物进行了分析表征。结果表明，：纳米碳化钒/碳化铬复合粉末的最佳合成条件为：碳的质量分数为35%，反应温度为900℃，保温时间为1h。在该条件下的反应产物主要由V3Cr2C5、Cr2VC2和Cr3C2组成，颗粒为球形或类球形，分散性较好，无明显团聚现象，平均颗粒尺寸约为50nm，复合粉末的比表面积为115.53m2/g。添加纳米碳化钒/碳化铬复合粉末可以提高陶瓷结合剂cBN磨具的力学性能和磨削效率，降低磨具的损耗，并且对磨具具有减摩作用。     

Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP)

Digital light processing (DLP) is one of the most important additive manufacture technologies to fabricate ceramic parts with complex geometries. Compared with pure photosensitive resin, the cure performance of ceramic suspensions is obviously different due to the optical property change after the addition of ceramic powders. In this paper, a unique oxidation process was used to modify the optical properties of nitride powders including AlN and Si₃N₄. The properties of oxidized ceramics were investigated and the cure performance of ceramic suspensions was then characterized. The effect of oxidation time on cure performance was evaluated. The results showed that for AlN, oxidation process leads to the smaller cure depth and smaller excess cure width as compared with non-oxidized AlN and for Si₃N₄, oxidation process leads to the larger cure depth and larger excess cure width as compared with non-oxidized Si₃N₄, indicating that both refractive index and light absorbance of ceramic powders have obvious effects on cure behaviors. Additionally, the cure behavior of oxidized ceramic suspension in this study shows that the relationship of cure depth vs. incident energy agrees well with Beer- Lambert model, but the excess cure width vs. incident energy is not consistent with quasi Beer-Lambert model due to the nature of digital micromirror device (DMD).     

Sintering behavior of Ni–Zn ferrite powders prepared by molten-salt synthesis

Ni_0.5Zn_0.5Fe₂O₄ powders were prepared by a novel molten-salt synthesis method. The effects of calcination processes of the powders on their sintering behaviors were investigated. Compared with the synthesis by traditional solid-state reaction, the proposed molten-salt method can significantly reduce the synthesis temperature of Ni_0.5Zn_0.5Fe₂O₄ from 800 to 550°C below, and the prepared powders have relatively high sintering activity at low temperature, which can thus decrease the sintering temperature. However, the abnormal growth of grains is easy to occur during sintering, thus resulting in uneven grain size. In particular, during the molten-salt synthesis, the holding time for calcination is a dominant factor affecting the activity and crystallization degree of the resultant powders. From the point of view of increasing the density of sintered bodies, the optimal conditions for synthesizing Ni_0.5Zn_0.5Fe₂O₄ powder by the proposed molten-salt synthesis is 400°C for 6 h. In addition, the saturate magnetization of the finally obtained ferrite ceramics has nothing to do with the preparation processes, while their coercivity depends on their densification and grain size caused by their different processing routes.     

碳纳米管@球形氮化碳核壳结构光催化剂的构筑及其性能

以二氰二胺和三聚氯氰为原料，以碳纳米管 (CNT)为核，采用溶剂热法成功制备了一系列不同CNT质量的可见光响应的碳纳米管@球形氮化碳 (CNT@CNMS) 核壳结构催化剂。采用X射线衍射光谱（XRD）、傅里叶变换红外（FT-IR）、透射电子显微镜（TEM）、紫外可见光谱(UV-vis)、X射线光电子能谱(XPS)、电化学阻抗（EIS）和光致发光光谱（PL）等分析方法对催化剂进行了表征。通过电化学表征计算出CNMS的价带与导带位置。结果表明，CNMS均匀的生长到管状CNT表面，形成CNT@CNMS核壳结构；制备的CNT@CNMS核壳催化剂比表面积增大，且可见光吸收性能明显增强。光催化性能试验表明，当CNT质量为20 mg时，制备的催化剂性能最高，反应120 min，4 - 硝基苯酚的降解率高达54.44%，其降解效果明显高于CNMS。该研究对于采用溶剂热法制备核壳结构基氮化碳催化剂治理油田废水中酚类污染物提供了理论基础。     

球形碳酸钙的控制合成研究

以硼酸为控制剂，氯化钙和碳酸钠为原料，采用共沉淀法制备了方解石型碳酸钙球形晶体。研究了控制剂浓度、反应温度、反应时间、反应物浓度等因素对碳酸钙粒径和形貌的影响。结果表明：在硼酸浓度为0.4 mol/L、氯化钙浓度为0.1 mol/L、20 ℃饱和碳酸钠溶液滴速为4.9 mL/min、反应时间为60 min、陈化时间为60 min、反应温度为50 ℃、氯化钙与碳酸钠物质的量比为1∶1条件下，制备的球形碳酸钙颗粒大小均匀，平均粒径为1.57 μm。     

Thermoelastic analysis of laminated composite and sandwich shells considering the effects of transverse shear and normal deformations

Abstract

In the present study, thermoelastic analysis of laminated composite and sandwich shells (cylindrical/spherical) is presented using fifth-order shear and normal deformation theory. The significant characteristic of the present theory is that it includes the effects of both transverse shear and normal deformations. The mathematical formulation uses the principle of virtual work to derive the variationally consistent governing equations and traction free boundary conditions. To obtain the static solution, these governing equations are solved by employing Navier’s solution technique. The shell is subjected to a mechanical/thermal load sinusoidally distributed over the top surface of the shell. The thermal load linearly varies across the thickness of the shell. The present results are compared with other higher-order models and 3D elasticity solution wherever possible. Thermal stresses presented in this study will act as a benchmark for the future work.     

二甲醚球形扩散火焰的熄火机理研究

采用改进的PREMIX模型及"化学爆炸模式分析(CEMA)"方法,对二甲醚(DME)球形扩散火焰的熄火机理进行数值诊断,分析环境氧气摩尔分数(X_(O_2))及详细基元反应对熄火极限的影响,利用"爆炸因子"和"分岔因子"的概念,确定控制DME球形扩散火焰熄火的关键反应动力学因素。结果表明:DME冷焰具有比热焰更宽的可燃范围;冷焰对X_(O_2)的敏感性弱很多,热焰中具有正特征值的CEM首次出现在最高温度处;在熄火极限附近,CEM的特征值变为虚数,说明熄火伴随着振荡;热焰的熄火主要由小分子所参与的高温反应所控制,而冷焰熄火主要由大分子所参与的低温反应所控制。