井巷掘进控制斜形炮孔钻孔精度的试验研究

井巷掘进爆破工程中，工作面按设计要求，布置各种斜形炮孔，利用量角器和垂直尺控制钎杆与工作面夹角，使炮孔钻孔精度与设计炮孔角度基本上符合，在生产中取得了良好的爆破效果．     

提高发酵过程乙醇分离效率的新型反应器

设计了一种新型的带侧臂循环的气升式反应器,该反应器可以有效地把真空闪蒸发酵和汽提发酵2项技术结合起来。实验结果表明,与单独的汽提和闪蒸过程相比,利用此反应器进行同步汽提闪蒸操作,大大提高了乙醇的移出效率,从而进一步提高了发酵强度。     

Studies on film potentiometric stripping analysis: effects of electrochemical parameters

Film potentiometric stripping analysis (PSA) is a novel method for concentrating the test ion directly on a glassy carbon electrode with subsequent stripping by a chemical oxidant, the redissolution step being followed by a chronopotentiometric sequence. The electrochemical parameters governing both preconcentration and redissolution steps are studied on a rotating disk electrode: experimental results are compared with the theoretical developments recently published. Except for the influence of rde rotation rates on each step and on analytical parameters, experiments and theory are in agreement. Discrepancies concerning the rotation rate effects are studied by potentiostatic coulometry and voltammetry measurements in regard to the preconcentration step: the rotation rate effects are based on the physical behaviour of the rde. Routine analysis is carried out using film PSA, Pb(II) as the test ion and Fe(III) as oxidizing agent, in perchlorate medium.     

影响海岛法纺PET超细纤维剥离性的因素

采用海岛复合法纺制PET超细纤维,织物终产品的剥离性能的优劣是由纺丝过程中原料、设备、工艺等因素决定的,着重通过表界面原理定性分析指出解决方法和调整方向。     

浅谈有堰汽提塔在PVC生产中的应用

介绍了聚合后处理工序—有堰汽提塔的装置特点、工艺以及在生产中的应用。运行应用体现了该装置高效、低耗、环保、优等品率高等特点。     

氨汽提尿素装置扩能改造的可行性分析

介绍中石油宁夏石化分公司二化肥尿素装置的现状，拟采用二氧化碳汽提法对装置进行50％扩能改造，分析改造方案的可行性。     

New liquid membrane technology for simultaneous extraction and stripping of copper(II) from wastewater

In this paper, a new liquid membrane technique, hollow fiber renewal liquid membrane (HFRLM), is presented, which is based on the surface renewal theory, and integrates the advantages of fiber membrane extraction, liquid film permeation and other liquid membrane processes. The results from the system of CuSO₄+D2EHPA in kerosene+HCl show that the HFRLM process is very stable. The liquid membrane is renewed constantly during the process, the direct contact of organic droplets and aqueous phase provides large mass transfer area. These effects can significantly reduce the mass transfer resistance in the lumen side. Then the mixture of feed phase and organic phase flowing through the lumen side gives a higher mass transfer rate than that of stripping phase and organic phase, because the aqueous layer diffusion of feed phase is the rate-controlling step. The overall mass transfer coefficient increases with increasing flow rates and D2EHPA concentration in the organic phase, and with decreasing initial copper concentration in the feed phase. The overall mass transfer coefficient also increases with increasing pH in the feed phase, and reaches a maximum value at pH of 4.44, then decreases. Also, there is a favorable w/o volume ratio of 20:1 to 30:1 for this process. Compared with hollow fiber supported liquid membrane and hollow fiber membrane extraction processes, HFRLM process has a high mass transfer rate. Mathematical model for the HFRLM process based on the surface renewal theory is developed. The calculated results are in good agreement with experimental results under the conditions studied.     

胶乳汽提脱除单体的机理及数学模型

本文研究了丁苯吡胶乳的脱气机理,实验证明了这个包括有多个传质阶段的复杂传质过程是由单体从胶粒内扩散到表面并穿过界面进入液相的传质阶段所控制。从这一机理出发,选择了脱气过程的工艺条件。通过简化脱气过程的物理模型,从理论上推导出脱气过程的数学模型,并用实验证实了这一模型。通过对多种胶乳及各种脱气设备的应用,证明该模型具有普遍性。本文提出用定义的脱气速度常数来研究和设计脱气过程的方法。     

弯曲模滑块卸料机构设计

为了实现弯曲模的自动卸料 ,设计了滑块卸料机构 ,介绍了该机构的工作过程及其设计要点。采用自动卸料机构 ,降低了劳动强度、提高了生产效率、保证了操作安全     

Electrochemical stripping features of graphite and its products characterization

A stable dispersion in mixed solvent of water and N,N-dimethyl formamide (DMF) of graphene was synthesized by one-step electrochemical approach. Here we demonstrate about electrochemical stripping graphite to prepare graphene influence by different electrolytes. The physical and chemical properties of the stripping product had been characterized by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometer (UV-Vis), Scanning electron microscopy (SEM), Transmission Electron Microscope (TEM) . The characteristic results of XRD showed that it could improve the efficiency of graphite stripping when H₂SO₄ was used as electrolyte mother liquid and amount of HNO₃ was doped in electrolyte; XPS and FTIR results indicate that the electrochemical stripping products preserve the intrinsic structure of graphene. The results of SEM and TEM shown that the surface morphology of the as-prepared graphene was folded lamellar structure and have good transparency;its thickness varies from 0.8 nm to a few nanometers.