Numerical modeling of hydrogen catalytic reactions over a circular bluff body

This paper was intended to delineate numerical research for hydrogen catalytic combustion over a circular cylinder. The wire/rod-type catalytic reactor is a simple geometry reactor with an economical design with less pressure loss. For the single rod in the reaction channel, the flow characteristic and the difference of conversion efficiency between non-gas-phase reaction and gas-phase reaction have been delineated in the present study. The flow field and the chemical reactions were numerically modeled using 2D Large Eddy Simulation combined with the gas-phase and surface reaction mechanisms. The results show that the current numerical simulation has been validated to precisely predict the vortex shedding and its frequency in the cold flows. Despite the variation trends being dominated by the upstream flow, the vortex shedding phenomena were affected by the flue gas generated from the rod surface. It can be seen from the linear relationship between the vortex shedding frequency of reacting flow and Reynolds Number. It is noted that the vortex shedding vanished if the gas-phase reaction was ignited in the reaction channel. In addition, the geometric modified conversion efficiency was proposed to delineate an indicator that could be potential for the optimization of rod-type catalytic reactor. In summary, the fundamental study of a rod in a 2D flow channel can provide information for optimizing the catalytic design or the rod array arrangement in the reactor. Moreover, the rod can also be a partial catalytic flame holder to ignite and stabilize the gas-phase reaction. The obtained results could be the potential for practical applications of rod-type catalytic combustion, catalytic gas turbine, hydrogen generation, partially catalytic reaction flame holder, and other catalytic reactions that can be appreciated.     

用于电弧检测的电力专用SoC设计

针对传统的电弧电路故障检测结果不准确的问题,设计用于电弧检测的SoC系统,并且在55nm工艺下进行流片验证。采用包含两种结构的模数转换器的片上电压源,设计了锁相环以及复位电路,精度最高可达8.67 bit。验证结果表明,本设计可提高电弧检测的准确性。     

Advanced Understanding of the Electron Transfer Pathway of Cytochrome P450s

Cytochrome P450s are heme-thiolate enzymes that participate in carbon source assimilation, natural compound biosynthesis and xenobiotic metabolism in all kingdoms of life. P450s can catalyze various reactions by using a wide range of organic compounds, thus exhibiting great potential in biotechnological applications. The catalytic reactions of P450s are driven by electron equivalents that are sourced from pyridine nucleotides and delivered by cognate or matching redox partners (RPs). The electron transfer (ET) route from RPs to P450s involves one or more redox center-containing domains. As the rate of ET is one of the main determinants of P450 efficacy, an in-depth understanding of the P450 ET pathway should increase our knowledge of these important enzymes and benefit their further applications. Here, the various P450 RP systems along with current understanding of their ET routes will be reviewed. Notably, state-of-the-art structural studies of the two main types of self-sufficient P450 will also be summarized.     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

纤维素催化热解定向调控制取不含氧烃类液体燃料

为了将生物质能高效转化为高品位不含氧的液体燃料,以纤维素为例,研究了以催化热解方式将热解产物转化为芳香烃类液体燃料的过程.实验发现,纤维素热解产生的含氧有机小分子,可以通过催化热解的形式高效转化为不含氧的芳香烃类液体.催化剂采用HZSM-5(23)、催化剂原料质量比例为5∶1、热解温度为650℃、升温速率为10000 K/s的工况为纤维素催化热解的最佳工况,单环芳烃、多环芳烃产率分别为9.90%和12.91%,总芳香烃类产率为22.81%.热解温度提升至650℃前,更高的热解温度能获得更高的芳香烃产率.继续提高热解温度,单环芳烃、多环芳烃分子间还可能进一步发生聚合反应,最终产生积碳.同时本文也提出了一种可行的纤维素催化热解中的反应途径,与本文实验结果较为匹配.     

FCC废催化剂镁改性催化裂化性能再生研究

提出并证实了高的强酸性位可接近性导致FCC废催化剂失活的机制。基于所提出的失活机制，采用浸渍法对FCC废催化剂进行镁改性再生。对所制备的再生FCC废催化剂进行了表征并考察了其重油催化裂化性能。表征结果表明，与未改性的FCC废催化剂相比，再生FCC废催化剂表面酸强度被一定程度地削弱，而表面总酸量和结构性质参数未出现显著改变。重油催化裂化结果表明，得益于适宜的表面酸性，再生FCC废催化剂的催化裂化反应性能得到极大改善。与未改性的FCC废催化剂相比，再生FCC废催化剂的汽油产率显著增加了3.04个百分点，同时干气、液化气、焦炭和重油产率则分别下降了0.36、0.81、1.28和0.87个百分点，这使得所制备的再生FCC废催化剂可以代替部分新鲜FCC催化剂使用。最后，探讨了再生FCC废催化剂表面酸性改变机理。     

A new controller for boost dc–dc converters based on a novel sliding surface

ABSTRACT

In this paper, two control schemes for boost converters affected by uncertainties in input voltage and load are proposed. The boost converter dynamics is redefined in terms of new state variables to facilitate the use of a disturbance observer that can estimate matched and unmatched disturbances. A sliding surface, which is new in the context of boost converters, is proposed to enable tracking and regulation of output voltage without requiring measurement of input voltage and load current. The stability of the overall system including the disturbance observer, the sliding variable and the output is proved. The performance of the schemes is assessed for regulation of output voltage and tracking of reference voltage by simulation as well as experimentation in which various types of uncertainties and various types of reference voltages are considered.     

基于PEMS测量的SSCR系统整车道路排放测试研究

基于车载排放测试系统进行SSCR系统国Ⅴ重型柴油车实际道路排放测试研究。SSCR后处理系统使用前后整车NO_x排放特征的比较显示:对比原NO_x排放,在市区工况下,SSCR系统可降低61.3%的NO_x排放,在高速工况下可以降低85.3%的NO_x排放。测试研究表明:安装有SS-CR系统的国Ⅴ重型柴油车在实际道路工况下NO_x排放符合国ⅤPEMS标准(送审稿)。