Damage mechanism at different transpassive potentials of solution-annealed 316 and 316l stainless steels

Electrochemical impedance spectroscopy (EIS), anodic polarization and scanning electron microscopy techniques were used to investigate the damage mechanism in the transpassive potential region of AISI ...     

Wear and Creep Characteristics of a Carbon‐Derived Si3N4/SiC Micro/Nanocomposite

In the presented work some properties of a recently developed Si₃N₄/SiC micro/nanocomposite have been investigated. The material was tested using a pin on disc configuration. Under unlubricated sliding conditions using Si₃N₄ pin at 50 % humidity, the friction coefficient was in the range of 0,6 ‐ 0,7. The reduction of humidity resulted in a lower coefficient of friction, in vacuum the coefficient of friction had a value of about 0,6. The wear resistance in vacuum was significantly lower then that in air. The wear patterns on the Si₃N₄+SiC disc revealed that mechanical fracture was the wear controlling mechanism. Creep tests were realized in four point bending configuration in the temperature interval 1200‐1400 °C at stresses 50,100 and 150 MPa and the minimal creep deformation rate was established for each stress level. The activation energy, established from the minimal creep deformation had a value of about 360 kJ/mol and the stress exponent values were in the range of 0.8‐1.28. From the achieved stress exponents it can be assumed that under the studied load/temperature conditions the diffusion creep was the most probable creep controlling mechanism.     

Tribotronics—Towards active tribology

A constant trend towards more compact mechanical systems with higher power densities and increased thermo-mechanical loads emphasises the importance of the development of new design approaches and novel tribological systems. Ignoring this may cause a significant slow down in technological and industrial development. Tribotronics or active tribology based on adaptive performance is thought of as being critical in the implementation of smart machine concepts. Recognition of the importance of tribotronics, or active control of system loss outputs, such as those through friction and wear will have significant beneficial economic consequences as a result of the associated accelerated rate of technological progress. These smart tribotronic systems can be embedded in a great variety of machines and mechanisms. If this integration is made at the design stage, products that are more flexible, efficient and reliable can be produced. The concept of tribotronics is presented and discussed in this paper. Some illustrative examples that show the feasibility of an “active” approach are given. In addition, various possibilities already reported in literature are discussed.     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

Drugs, memory, and metamemory: A dose-effect study with lorazepam and scopolamine.

This experiment was designed to use the graded dose-related amnesia produced by the benzodiazepine lorazepam (1.0, 2.0 mg/70 kg, oral) and the anticholinergic scopolamine (0.3, 0.6 mg/70 kg, subcutaneous) as a tool to explore the cognitive and neurochemical mechanisms underlying metamemory in the judgment of learning paradigm, with a placebo-controlled independent groups design in healthy volunteers (n=12/group). Results provide evidence for a pharmacological dissociation between effects on memory versus metamemory (relative accuracy of item-by-item monitoring) across a range of levels of memory performance and suggest that the drugs selectively impair those aspects of metamnemonic monitoring that require participants' awareness of their overall current state of functioning (absolute accuracy of prospective item-by-item monitoring, prospective global monitoring) but not those that rely solely on assessment of individual item characteristics (relative accuracy of item-by-item monitoring). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

硅表面上的纳米量子点的自组织生长

纳米半导体量子点以其所具有的新颖光电性质与输运特性正在受到人们普遍重视。作为制备高质量纳米量子点的工艺技术 ,自组织生长方法倍受材料物理学家的青睐。而如何制备尺寸大小与密度分布可控的纳米量子点更为人们所注目。因为这是关系到纳米量子点最终能否器件实用化的关键。文中以此为主线 ,着重介绍了各种 Si表面 ,如常规表面、氧化表面、台阶表面以及吸附表面上 ,不同纳米量子点的自组织生长及其形成机理 ,并展望了其未来发展前景     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

Achievement of specificational information usage with true and false feedback in learning a visual relative-mass discrimination task.

Participants' usage of informational variables in learning visual relative-mass discrimination in collisions was tracked by means of PROBIT correlations. Four groups received feedback that was true or accorded with either of three nonspecificational cue variables. A majority in each group adopted the feedback, but several participants defied the false feedback. Unlike in previous research, the fit to data of the relative-mass invariant could not be bettered by post hoc linear combinations of the cues. Discriminability was lower in the use of the invariant. Analytic complexity was rejected as an explanation for discriminability differences. A "smart mechanism" for pickup of the relative-mass invariant was developed as an extension of G. Johansson's (1950/1994) vector model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)