Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

This work is focused on the explosion characteristics of premixed gas containing different volume fractions of hydrogen in a narrow channel (1000 mm × 50 mm × 10 mm) under the circumstance of stoichiometric ratio. The ignition positions were set in the closed end and the middle of the pipeline respectively. The results showed that when the gas was ignited at the pipeline closed end, the propagating flame was tulip structure for different premixed gas. When the hydrogen volume fraction was less than 40%, the flame propagation speed increased significantly with the rise of hydrogen volume fraction, and the overpressure peak also appeared obviously in advance. However, when the volume fraction of hydrogen was more than 40%, the increase of flame propagation speed and the overpressure peak occurrence time varied slightly. Furthermore, when the ignition position was placed in the middle of the pipeline, the flame propagation speed propagating to the opening end was much faster than that propagating to the closing end, and there was no tulip shape when the flame propagates to the opening end. The flame propagating to the closed end appeared tulip shape under the influence of airflow, and high-frequency flame oscillation occurred during the propagation. This work shows that the hydrogen volume fraction and ignition position significantly affected the flame structure, flame front speed, and explosion overpressure.     

Effect of wind condition on unintended hydrogen release in a hydrogen refueling station

Ambient condition, especially the wind condition, is an important factor to determine the behavior of hydrogen diffusion during hydrogen release. However, only few studies aim at the quantitative study of the hydrogen diffusion in a wind-exist condition. And very little researches aiming at the variable wind condition have been done. In this paper, the hydrogen diffusion in different wind condition which including the constant wind velocity and the variable wind velocity is investigated numerically. When considering the variable wind velocity, the UDF (user defined function) is compiled. Characteristics of the FGC (flammable gas cloud) and the HMF (hydrogen mass fraction) are analyzed in different wind condition and comparisons are made with the no-wind condition. Results indicate that the constant wind velocity and the variable wind velocity have totally different effect for the determination of hydrogen diffusion. Comparisons between the constant wind velocity and the variable wind velocity indicate that the variable wind velocity may cause a more dangerous situation since there has a larger FGC volume. More importantly, the wind condition has a non-negligible effect when considering the HMF along the radial direction. As the wind velocity increases, the distribution of the HMF along the radial direction is not Gaussian anymore when the distance between the release hole and the observation line exceeds to a critical value. This work can be a supplement of the research on the hydrogen release and diffusion and a valuable reference for the researchers.     

Influence of α′‐/α‐crystal polymorphism on properties of poly(l‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a biodegradable and biocompatible thermoplastic polyester produced from renewable sources, widely used for biomedical devices, in food packaging and in agriculture. It is a semicrystalline polymer, and as such its properties are strongly affected by the developed semicrystalline morphology. As a function of the crystallization temperature, PLLA can form different crystal modifications, namely α′‐crystals below about 120 °C and α‐crystals at higher temperatures. The α′ modification is therefore of special importance as it may be the preferred polymorph developing at processing‐relevant conditions. It is a metastable modification which typically transforms into the more stable α‐crystals on annealing at elevated temperature. The structure, kinetics of formation and thermodynamics of α′‐ and α‐crystals of PLLA are reviewed in this contribution, together with the effect of α′‐/α‐crystal polymorphism on the properties of PLLA. © 2018 Society of Chemical Industry     

心源性猝死一级预防植入心律转复除颤器前非持续室性心动过速与植入后恰当治疗的关系

目的探讨植入型心律转复除颤器(implantable cardioverter defibrillator,ICD)用于心源性猝死一级预防时,植入前发生非持续性室性心动过速(non-sustained ventricular tachycardia,NSVT)与植入后ICD恰当治疗的关系。方法本研究为单中心回顾性队列研究,连续纳入2006年1月至2017年12月在北京协和医院住院植入ICD用于一级预防的心脏病患者,患者在住院期间ICD植入前均完善Holter检查。根据Holter检查是否出现NSVT,将患者分为NSVT组及无NSVT组。门诊或电话随访至2018年8月,随访事件包括全因死亡、植入后ICD放电治疗及抗心动过速起搏(antitachycardia pacing,ATP)治疗情况。结果纳入60例符合入选和排除标准的患者,随访时间37 (14～61)个月,KaplanMeier生存曲线及Log-Rank检验提示,NSVT组与无NSVT组相比,全因死亡率无统计学差异(P=0. 108),NSVT组恰当治疗的风险高于无NSVT组(P=0. 033),NSVT和左心室射血分数与ICD恰当治疗独立相关(NSVT:HR=5. 099,95%CI:1. 399～18. 588,P=0. 014;左心室射血分数:HR=1. 077,95%CI:1. 013～1. 145,P=0. 018)。结论 ICD一级预防患者植入前出现NSVT提示接受ICD恰当治疗的风险增加。     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

Cover Feature: A Comparative Study of in vitro Assays for Predicting the Nonspecific Binding of PET Imaging Agents in vivo (ChemMedChem 7/2020)

Nonspecific binding (NSB) is a key parameter in optimizing PET imaging tracers. We compared the ability to predict NSB of three available methods: LIMBA, rat f_u,brain, and CHI(IAM). Even though NSB is often associated with lipophilicity, we observed that logD does not correlate with any of these assays, clearly indicating that lipophilicity, while influencing NSB, is insufficient to predict it. A cross-comparison of the methods showed that all three correlate and are useful predictors of NSB. The three assays, however, rank the molecules slightly differently, illustrating the challenge of comparing molecules within a narrow chemical space. We also noted that CHI(IAM) values more effectively predict V_NS, a measure of in vivo NSB in the human brain. CHI(IAM) measurements might be a closer model of the actual physicochemical interaction between PET tracer candidates and cell membranes, and seems to be the method of choice for the optimization of in vivo NSB.     

Signature of Meyer-Neldel compensation rule in iso-conversional crystallization under the influence of γ-ray irradiation

In the current article, the influence of three different doses of gamma-rays on the thermally assisted crystal growth in a novel ternary chalcogenide glassy Se₇₈Te₂₀Sn₂ semiconductor has been reported in terms of the re-crystallization. The iso-conversional kinetic approach is used in the present study. The variation of crystal growth rate with temperature obeys the Arrhenius relation for all the doses of gamma-rays irradiation. Further analysis confirms that pre-factor K₀ of crystal growth rate and the corresponding energy ΔE involved in thermally governed crystallization follows Meyer-Neldel compensation rule (MNCR). Further, we have observed a linear correlation i.e., Further Meyer-Neldel compensation rule (FMNCR) between Meyer-Neldel pre-factor K₀₀ and Meyer-Neldel energy kT₀. The observed correlations between these significant parameters (MNCR between K₀ & ΔE and FMNCR between K₀₀ & kT₀) may open a new gateway for revealing the external effects on crystal growth rate during the iso-conversional analysis of crystallization kinetics.     

A peapod-like ZnO@C design with internal void space to relieve its large-volume-change as lithium-ion battery anode

Peapod-like ZnO@C with internal void space has been synthesized by calcination of ZnO/ZnOHF@polydopamine nanorods. By designing both the large void space between particles and external elastic carbon shell, the large volume change of ZnO during charge-discharge process could be effectively relieved. Moreover, the carbon shell functioned as an electronic conductor and elastic barrier, could accelerate the reaction kinetics and confine stable SEI films formation on the outer protective layer to further improve the structural integrity. Benefiting from these structure advantages, the peapod-like ZnO@C presents a prominent electrochemical performance with a retained discharge capacity of 565.1 mA h g^?1 at 0.2 A g^?1 and high rate capacity of 246.6 mA h g^?1 even at 4 A g^?1.     

A new method to improve the electrical properties of KNN-based ceramics: Tailoring phase fraction

Although both the phase type and fraction of multi-phase coexistence can affect the electrical properties of (K,Na)NbO₃ (KNN)-based ceramics, effects of phase fraction on their electrical properties were few concerned. In this work, through changing the calcination temperature of CaZrO₃ powders, we successfully developed the 0.96 K_0.5Na_0.5Nb_0.96Sb_0.04O₃-0.01CaZrO₃-0.03Bi_0.5Na_0.5HfO₃ ceramics containing a wide rhombohedral-tetragonal (R-T) phase coexistence with the variations of T (or R) phase fractions. It was found that higher T phase fraction can warrant a larger piezoelectric constant (d₃₃) and d₃₃ also showed a linear variation with respect to tetragonality ratio (c/a). More importantly, a number of domain patterns were observed due to high T phase fraction and large c/a ratio, greatly benefiting the piezoelectricity. In addition, the improved ferroelectric fatigue behavior and thermal stability were also shown in the ceramics containing high T phase fraction. Therefore, this work can bring a new viewpoint into the physical mechanism of KNN-based ceramics behind R-T phase coexistence.