往复活塞式压缩机活塞杆温度高故障分析及改造

针对2台2D40型空气压缩机在实际试机过程中,活塞杆温度过高,导致连锁报警,压缩机不能正常工作的问题进行了详细的故障原因分析;对压缩机技术性能参数进行介绍;对压缩机的损伤情况进行说明并找到改造方案,解决机组运行中活塞杆温度过高的问题,从而提高机组的运行效率,使机组运行安全、稳定。     

机抽—速度管复合排水采气新工艺

为了提高目前常用的排水采气工艺的适应性,同时降低由排采工艺调整带来的额外的成本开销,利用空心抽油杆对机抽工艺进行了改进,结合应用所研发的空心防气排水采气专用泵,形成了机抽—速度管复合排水采气工艺,并在鄂尔多斯盆地苏里格气田某产水气井进行了现场试验。研究结果表明:①该工艺实现了机抽与速度管柱、气举、泡排等多种排采工艺的自由组合,并且可根据气井产水特点灵活调整适合的排采工艺,提高了工艺的适应性;②采用的游动阀及固定阀均依靠抽油机动力和空心抽油杆重力实现强制启闭,避免了气锁和砂卡引起的机抽失效;③该工艺的选井原则为气井初期产气量较高(大于1×10~4m~3/d)、产水量相对较高(介于3～30 m~3/d),且井口到液面的距离小于2500m;④针对产气量分别为2×10~4m~3/d、1×10~4m~3/d的气井,需采用外径为36 mm、壁厚为6 mm或外径为38 mm、壁厚为6 mm的空心抽油杆进行速度管排水采气,针对产气量为0.6×10~4m~3/d的气井,需采用外径为34 mm、壁厚为5.5 mm的空心抽油杆进行速度管排水采气。结论认为,该工艺可以明显提高产水气井的稳产气量,实现产水气井的连续、稳定生产,应用效果好。     

全自动剥锌机振打机理分析与试验研究

根据全自动剥锌机组在工业生产上的使用情况,通过分析其振打设备中活塞钎杆模型的振打机理,分析振打锤敲击阴极板面的应力传递关系,初选振打锤基本参数,重新设计振打设备。通过工业试验,采用单因素控制变量法,试验分析振打次数、气压压强、锤心至锌片上边缘的距离,以及这三个因素对振打效果的影响。结果可为今后同类型设备的优化设计提供参考和依据。     

汽车悬架球头拉杆冷成形技术

为提高生产效率、改变原来通过车削加工汽车悬架球头拉杆的方式,提出了一种球头拉杆的多工位冷镦成形工艺。基于DEFORM-3D软件建立了有限元模型,对球头拉杆的塑性成形过程进行了仿真,研究了预成形凸模入模角α、预成形凹模圆角R1、终成形凹模圆角R2以及终成形凹模入模角β等工艺参数对球头拉杆成形的影响,并进行了正交试验,以模具在球头拉杆成形过程中所受载荷及工件损伤值为优化目标,获得了合理的工艺参数组合。结果表明:在保证工件成形质量及模具寿命的前提下,当预成形凸模入模角α为30°、预成形凹模圆角R1为12 mm、终成形凹模圆角R2为3 mm、终成形凹模入模角β为60°时,模具载荷及工件损伤有显著的降低。采用优化后的参数进行试模生产,工件成形质量较好,验证了模拟结果的可信性,能够有效地指导工艺设计人员的设计工作。     

国内外帘线钢盘条夹杂物检验方法的介绍

围绕国内外帘线钢盘条的夹杂物检验方法，对国内外4种主要典型帘线钢盘条夹杂物检验方法进行了详细介绍及比较，了解了4种检验方法的技术特点，总结了帘线钢盘条夹杂物检验方法的核心要点，尤其对这4种检验方法中所涉及的试样取样面积、夹杂物的类型名称、光学显微镜下不同类型夹杂物的特征形貌进行了识别，阐明了做好帘线钢盘条夹杂物检验和质量控制的价值和意义。     

一种钛白粉转窑煅烧尾气余热利用新装置

钛白粉煅烧转窑尾气的高湿、高硫、高酸露点的特性使得转窑尾气余热利用过程中换热器寿命不理想。在总结已有尾气余热利用方式存在问题的基础上,提出了一种长寿命、易维护的套管式热管余热利用装置,该装置由彼此分离的换热套管通过弯头、法兰连接成为整体,尾气垂直横掠双层套管段,与高硫、高湿的尾气通过相变介质的相变完成热量由尾气向取热介质的转移,产生钛白粉生产工艺所急需的蒸汽,双层管的相变换热套管对比单层管的重力热管换热器寿命明显延长;连接换热套管的单层管弯头不与高湿、高硫尾气换热,大大减轻了尾气对单层管的腐蚀。换热器应用在3.6 m×58 m的钛白粉煅烧窑上,每年可以产生0.9 MPa的水蒸气1.12万t,为企业带来可观的经济效益。     

Methodology for optimization of pouring variables using bottom pour for low masses of SS304 (<300 kg) in investment casting process (case study)

Bottom pour ladles with stopper rod systems are commonly used in the metal casting industry. However, stopper rod bottom-pouring systems have not yet been developed for the lower thermal masses of alloys typically used in the investment casting industry. Large thermal masses used with bottom pour systems are typically limited for ladles larger than 700 kg and to certain alloys with higher fluidity and longer solidification time like cast iron, aluminum alloys etc. In this study, bottom pour ladle designs and low thermal mass refractory systems have been developed and evaluated in production investment foundry trials with 300 kg pouring ladle. The ladles system and pouring practices used will be described along with the results from the pouring trials for SS304 that represents typical alloys used in Investment casting industries. Optimization of the variables used in an experimentation using Genetic algorithm is also explained.     

Centrifuge-aided micromolding of micron- and submicron-sized patterns

Developed from soft lithography, replica molding has been proven to be a good method to prepare micron- and submicron-sized features. However, the fidelity of the features can be compromised by incomplete feature cavity filling and feature shrinkage during the forming process. In this study, centrifuge-aided micromolding is developed to prepare micron- and submicron-sized ZnO features. By introducing a centrifugal force, the shear-thinning behavior of the suspensions is utilized, and the cavity filling process and the diffusion of trapped air out of the features are accelerated. The drying shrinkage is decreased by increasing the density of the wet nanoparticle packing from the centrifugal process. The centrifugal force improves the fidelity of all the designed features. ZnO ridges from 0.4 μm to 2 μm size and rods of 1.6 μm size are prepared successfully. The wide applicability of this strategy has been demonstrated by preparing ZrO₂ features via the same method.     

Mechanical and thermal couplings in helical strands*

Abstract

A generalized Timoshenko rod model is developed for helical strands and helically reinforced cylinders. The thermomechanical constitutive law has five effective elastic moduli, and two thermal coefficients, which can be obtained with the finite element method, or partly from analytic solutions. The model predicts nonclassical bending and thermoelastic behavior of helical strands. First, bending–shearing coupling is explicitly captured, which leads to non-planar bending under a transverse shear force, or a bending moment. Second, torsion and thermal expansion are coupled due to structural chirality. The dispersion relation of harmonic thermoelastic waves is governed by four non-dimensional parameters: two thermoelastic coupling constants, one chirality parameter and the Fourier number. The quasi-longitudinal and the quasi-torsional waves (“quasi” meaning the longitudinal mode is always coupled with a small torsional motion, and vice versa, due to chirality) are dispersive and damped, and dependent on temperature. The adiabatic-isothermal transition of the wave propagation is determined by the Fourier number.     

航班恢复问题的迭代局部搜索算法

在恶劣天气和机械故障等原因造成航班不能按照原计划执行时，航空公司需要采取相应的措施对航班进行恢复。本文基于经典的资源指派模型，综合考虑了调整时间、换机、联程拉直、取消航班和调机5种恢复策略，提出一种以最小化加权成本为优化目标的航班恢复模型，并设计一种迭代局部搜索算法。首先用构造-修复启发式方法构造可行解，然后从该初始解出发，在飞机路线对的邻域中进行局部搜索。当陷入局部最优后，对解进行扰动，然后从扰动后的解重新出发进行局部搜索。为了提高搜索效率，同时降低陷入局部最优解的概率，局部搜索过程采用模拟退火算法。实例结果表明，本文提出的模型及算法能够在短时间内对受到影响的大规模航班计划进行恢复。