“电工学实验”混合教学模式的探索与实践

在大类培养改革背景下,基于“电工学实验”开放式实践教学体系现状进行了“电工学实验”混合教学模式的研究,建立了“微课”资源并通过新型教学平台进行推送,确立了完备的混合教学模式应用机制并在部分专业进行了试点,通过分析试点调查数据得出混合教学模式具有在实验教学中提高学生学习效率、激发学生学习动力、促进学生个性发展、培养学生实践应用能力的优势,是落实创新应用型人才培养目标的重要举措。     

钢混结构大型厂房整体式爆破拆除

采用整体式控制爆破拆除方案对华电扬州电厂钢筋混凝土框-排架结构厂房进行了爆破拆除。爆破前,对汽机房、厂房外墙和楼梯进行了预处理。将厂房划分为3个爆区,采用非电多回路网格式爆破网路,依靠东侧锅炉房倒塌施加在西侧锅炉房上的倾覆力矩,有效地克服了西侧锅炉房向西倒的难题,可为同类工程提供一定的参考。     

Cold sintered,temperature-stable CaSnSiO5-K2MoO4 composite microwave ceramics and its prototype microstrip patch antenna

Dense (1-x)wt%CaSnSiO₅-xwt%K₂MoO₄ (CSSO-KMO) composite ceramics were fabricated by the cold sintering process at 180 °C under 400 MPa for 60 min. X-ray diffraction, Energy dispersive X-ray and Raman spectroscopy confirmed that CSSO and KMO coexisted without intermediate phases. As KMO weight fraction increased, relative permittivity (ε_r) and temperature coefficient of resonant frequency (τ_f) decreased and the microwave quality factor (Q×f, where f is resonant frequency) increased. Near-zero τ_f (-0.5 ppm/°C) was obtained for 65 wt%CSSO-35 wt%KMO with ε_r ～ 9.2 and Q×f ～ 6240 GHz. No chemical reaction between ceramic composites and silver was observed, demonstrating potential for cofiring with Ag-paste. A prototype antenna was fabricated from 65 wt%CSSO-35 wt%KMO composite ceramic with a bandwidth of 144 MHz @ -10 dB, a gain of 5.7 dBi and a total efficiency of 88.4 % at 5.2 GHz, suitable for 5 G mobile communication systems.     

大管径供水管线的安装与腐蚀防护分析

在近些年的发展中,我国经济水平得到了一个显著的增长,经济的增长推动了城市化的发展进程,进入21世纪,城市绿化工程建设规模呈一个稳定上升的趋势,在这种大的社会环境形势下,如何做好绿化大管径供水管线的安装与腐蚀防护工作成为了行业关注的焦点。大管径供水管线的稳定性关系着城市发展的可持续性,要从多方面做好大管径供水管线的安装工作,采取有效的措施应对管线腐蚀问题。     

食用植物油中矿物油污染物的分析进展

矿物油是C_(10)~C_(50)烃类化合物的总称,包括直链、支链和环状烷烃以及烷基取代芳烃两大类,化学成分复杂。食用植物油中普遍存在矿物油污染,含量达到1~1 000 mg/kg,矿物油污染来源广泛,涉及原料的采收、运输、加工和油脂的精炼、包装与储存等过程。植物油中干扰矿物油分析的成分较多,如甘油三酯、奇数碳正构烷烃、角鲨烯、甾烯、胡萝卜素等,需要采用适当方法排除。由于矿物油组成复杂,目前常用具有等碳响应的氢火焰离子化检测器分析含量,其中液相色谱-气相色谱联用是测定矿物油的理想技术。考虑到普及性问题,一些实验室开发了固相萃取结合大体积进样气相色谱法。综述了国内外近十年来食用植物油中矿物油的分析方法,以期为我国油脂及其相关产品中矿物油的检测工作提供参考。     

基于混合模式快速电荷平衡的神经刺激器

设计实现了一种可用于脊髓神经刺激器的多通道大电流神经刺激器。提出将电极短接和插入短电流脉冲相结合的混合模式,在大电流下,能更加快速地实现电荷平衡。电路设计上,将ADC动态比较器的回踢噪声消除技术应用于神经刺激器,使得动态比较器在输入压差较小时能够输出正确的比较结果,从而将电极上残留电压保持在更安全的范围内。基于CSMC 0.25 μm BCD工艺进行设计与仿真,结果表明,在单向且最大刺激电流为4 mA、刺激脉宽为60 μs、刺激周期为750 μs的条件下,该15 V、16路神经刺激器能实现±50 mV安全电压的有源电荷平衡。     

Synthesizing a uniformly spaced array pattern using integral operator for removing progressive phase shift

In this article, an analytical technique is introduced to obtain the excitation coefficients of uniformly spaced linear antenna arrays in order to achieve a desired array factor. By integration of the prescribed array factor, the array factor dependency to the progressive phase shift is eliminated. A new system of linear equations is consequently obtained whose solution represents the excitation coefficients of the array. Some examples are presented to verify the accuracy of the introduced method. The performance of this strategy is compared with those obtained by the other well‐known techniques such as Woodward‐Lawson and Fourier transform. It is shown that the presented method estimates the desired array pattern with a very good precision.     

Nature inspired 21 branches sneezewort/Achillea ptarmica plant growth pattern–shaped antenna for Ku‐band applications

This reported paper presents the design and analysis of wideband nature inspired planar antenna of 46 × 18 × 1.6 mm³ size, designed using FR4 (Flame Retardant) substrate. The antenna patch is delineated from the growth pattern of sneezewort plant with supplementary notion of golden ratio in branching and branch width. The total number of branches in each stage follows the Fibonacci series and the branch width is calculated from the golden ratio concept. Starting from one feed line and two branches, the maximum numbers of branches are increased to 20. There has been significant enhancement in the radiation performance of proposed geometry by increasing the number of branches to 21 and by modifying ground with T‐shaped slot. The antenna covers wide impedance bandwidth of 8.2 to 16.5 GHz by possessing stable radiation characteristics.     

Improved one-dimensional beam model for unbalanced composite single-lap joint

An analytical nonlinear solution was provided for unbalanced composite single-lap joint (CSLJ) using an improved one-dimensional beam model, which incorporated the effect of bending–tension coupling. The bending–tension coupling stiffness was introduced to characterize the coupling bending and tension behavior induced by the un-symmetric stacking sequence of composite laminates. The governing differential equations captured the bending–tension coupling behavior and the geometrically nonlinear features were constructed based on the displacement compatibility conditions of flexible interface. The transverse deformation in overlap region, edge moment factors and adhesive stress distributions for the unbalanced CSLJ with inflexible, intermediate flexibility and flexible adhesive can be determined by the present one-dimensional beam model. The accuracy of the present model was validated by the comparison with nonlinear finite element model. The effect of bending–tension coupling on edge moment factors and peak values of adhesive stresses was shed light on with the present model.     

大涡模拟Smagorinsky模型用于磨粒流精密加工喷嘴的质量控制研究

为研究固液两相磨粒流加工喷嘴小孔过程中的流场分布、涡旋形成规律及涡旋的存在对磨粒流加工的影响机制，采用Smagorinsky亚格子模型对磨粒流加工喷嘴小孔的流道进行大涡数值模拟，并使用磨粒流对变直径喷嘴工件进行加工试验。数值模拟发现磨粒流流体中磨粒与壁面的碰撞与剪切作用随流体的速度增大而增大，同一截面的速度存在速度差，其中还伴随涡旋的存在；通过试验研究发现：经固液两相磨粒流加工后的喷嘴小孔表面质量得到明显提高，喷嘴经过四次不同入口速度的磨粒流加工后大孔处表面粗糙度Ra由1.24 μm降至0.542 μm，小孔处表面粗糙度Ra由1.21 μm降至0.437 μm。结论显示固液两相磨粒流加工技术可有效提高被加工喷嘴工件的内表面质量，加工时同一截面的速度存在速度差，速度差的存在利于涡旋的形成，涡旋的存在利于提高磨粒流加工过程的剪切作用，有助于获得高质量的喷嘴小孔内通道表面。