辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

YOLSO: You Only Look Small Object

Small object detection is challenging and far from satisfactory. Most general object detectors suffer from two critical issues with small objects: (1) Feature extractor based on classification network cannot express the characteristics of small objects reasonably due to insufficient appearance information of targets and a large amount of background interference around them. (2) The detector requires a much higher location accuracy for small objects than for general objects. This paper proposes an effective and efficient small object detector YOLSO to address the above problems. For feature representation, we analyze the drawbacks in previous backbones and present a Half-Space Shortcut(HSSC) module to build a background-aware backbone. Furthermore, a coarse-to-fine Feature Pyramid Enhancement(FPE) module is introduced for layer-wise aggregation at a granular level to enhance the semantic discriminability. For loss function, we propose an exponential L1 loss to promote the convergence of regression, and a focal IOU loss to focus on prime samples with high classification confidence and high IOU. Both of them significantly improves the location accuracy of small objects. The proposed YOLSO sets state-of-the-art results on two typical small object datasets, MOCOD and VeDAI, at a speed of over 200 FPS. In the meantime, it also outperforms the baseline YOLOv3 by a wide margin on the common COCO dataset.     

Low area field-programmable gate array implementation of PRESENT image encryption with key rotation and substitution

Lightweight ciphers are increasingly employed in cryptography because of the high demand for secure data transmission in wireless sensor network, embedded devices, and Internet of Things. The PRESENT algorithm as an ultra-lightweight block cipher provides better solution for secure hardware cryptography with low power consumption and minimum resource. This study generates the key using key rotation and substitution method, which contains key rotation, key switching, and binary-coded decimal-based key generation used in image encryption. The key rotation and substitution-based PRESENT architecture is proposed to increase security level for data stream and randomness in cipher through providing high resistance to attacks. Lookup table is used to design the key scheduling module, thus reducing the area of architecture. Field-programmable gate array (FPGA) performances are evaluated for the proposed and conventional methods. In Virtex 6 device, the proposed key rotation and substitution PRESENT architecture occupied 72 lookup tables, 65 flip flops, and 35 slices which are comparably less to the existing architecture.     

卫生纸机压榨部运行参数及能效关系分析与优化

通过对纸机压榨部压力和压榨脱水原理的分析，得到出压榨部纸幅干度可作为压榨部的能耗指标，同时确定压榨线压力和纸机车速是压榨部能耗的主要影响因素。结合纸机实际生产测试并记录压榨脱水数据，绘制测试数据曲线图并拟合压榨线压力、纸机车速和出压榨部纸幅干度三者之间的函数关系，最终确定压榨线压力和纸机车速的最优取值范围。通过对测试数据的分析和拟合，控制压榨线压力在90 kN/m、纸机车速在1075 m/min时，纸幅质量可满足正常生产的要求，还可以节约2.1%的电能，实现卫生纸机压榨部的能耗优化。     

腔磁力系统中的诱导透明和快慢光传播

为了在腔磁力系统中实现可控的磁子诱导透明、磁力诱导透明以及快慢光传播,建立了一个混合腔磁力系统.该系统由一个含有YIG球的微波腔和在z方向对球施加一个均匀的偏置磁场组成,并用强泵浦场驱动磁子和弱探测场驱动微波腔.研究表明,通过调节腔与磁子之间的相互作用强度和微波腔与磁子的耗散比,可以增加磁子诱导透明(MIT)、磁力诱导透明(MMIT)的效果和提高快慢光传播的速度.该研究结果可为磁力诱导放大、量子光学操纵和量子信息存储以及灵敏光开关的研究提供参考.     

Strong tribocatalysis of strontium titanate nanofibers through harvesting friction energy for dye decomposition

Friction is a common clean energy and can be harvested and converted into electricity energy via triboelectricity, which can electrochemically drive dye decomposition in theory. In this work, the tribocatalytic Rhodamine B dye decomposition has been experimentally realized in strontium titanate (SrTiO₃) nanofibers, which are synthesized via a hydrothermal method. In the tribocatalytic dye decomposition process, the friction is exerted in the interface between catalyst surface and a polytetrafluoroethylene (PTFE) Teflon rod setup with the different stirring speed. The RhB dye decomposition ratios of SrTiO₃ nanofibers at these stirring speeds of 200 rpm, 400 rpm, 600 rpm, and 800 rpm are respectively 24.2%, 51.8%, 73.9% and 88.6%, yielding to these reaction rate constants of ～0.0112 h^?1, ～0.0260 h^?1, ～0.0562 h^?1 and ～0.0877 h^?1. The main active species, which play an important role in tribocatalytic process, are the superoxide radicals and holes on basis of the active species quenching experiment results. The excellent tribocatalysis activity makes SrTiO₃ nanofibers potential for application in dye wastewater treatment through utilizing the environmental friction energy.     

Large piezoelectricity and potentially activated polarization reorientation around relaxor MPB in complex perovskite

Improving piezoelectric performance is always favorable to further enhance the sensitivity and accuracy of piezoelectric devices. Here, a complex piezoelectric system of Pb(Ni_1/3Nb_2/3)O₃-Pb(Yb_1/2Nb_1/2)O₃-Pb(Hf_0.1Ti_0.9)O₃ is designed and investigated in detail. Optimized piezoelectric response of ～ 880 pC/N is achieved at the composition of 0.51PNN-0.09PYN-0.40PHT. The characterization of TEM and In-situ high-energy synchrotron diffraction indicate that nanodomain growth and microdomain switching occurs in succession at around coercive electric field. Most interestingly, the coexisted tetragonal and rhombohedral-like phase transforms into multiple monoclinic-like phases with polarization vectors aligned as close to the electric field direction as possible under the strong electric field. The enhanced polarization instability in this complex morphotropic phase boundary sample should be ascribed to the strong local heterogeneity. The novel polarization rotation behavior found in this work would be important guidance for designing high-performance piezoceramics.     

基于Kinect的自适应跑步机行走速度估计方法

自适应跑步机是康复医疗和人体工程学的研究热点,也是虚拟现实运动输入设备的重要组成部分。针对自适应跑步机上人体位置相对地面几乎无变化,很难通过简单的位置差分获得到人体运动速度的问题,提出了一种适应性广、无标记点、非接触式的行走速度估计方法。将Kinect采集到的人体关节点位置数据通过四元数标定、高斯滤波和三次样条插值处理后,用步长修正算法计算出行走时的步态时空参数。基于步态时空参数估计使用者在自适应跑步机上行走时的速度。在固定速度的跑步机上,通过将速度估计值与所设定的跑步机实际速度进行对比,验证了速度估计算法有效性,该速度估计算法可以适用于自适应跑步机的控制算法开发。     

基于Franklin矩的亚像素级图像边缘检测算法

为了满足计算机视觉标定与精密测量对图像边缘定位的精确度高和抗噪性强的要求,提出一种基于Franklin矩的亚像素级图像边缘检测算法。首先,建立亚像素边缘模型,利用各级Franklin矩的卷积来提取图像边缘点的细节特征;然后,依据Franklin矩的旋转不变性原理,分析图像边缘旋转至垂直方向后各级Franklin矩之间的关系,从而确定图像中亚像素边缘的关键参数;最后,根据改进的边缘判断条件,确定图像中的实际亚像素边缘点。大量实验结果表明,与基于Zernike矩的亚像素级算法、基于小波变换与Zernike矩结合的亚像素级算法、基于Roberts算子与Zernike矩结合的亚像素级算法相比,本文提出的基于Franklin矩的亚像素级图像边缘检测算法速度更快,精度更高且抗噪性强,更好地满足了对于图像边缘定位稳定可靠及高精度测量的要求。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.