土木工程施工课程线上平台教学实践

土木工程施工课程作为土木工程及工程管理专业的学科基础课和核心专业课程,在疫情防控期间"停课不停教""停课不停学"的要求下,通过线上平台进行授课。由于土木工程施工课程内容庞杂、综合性强、实践性强,且章节之间关联性较弱,探究既能使学生快速适应,又能保证教学质量的在线教学方法至关重要。以华南某高校土木工程施工课程为例,基于中国大学MOOC、建筑云课、腾讯课堂、QQ群等线上平台讲授教学内容,并运用问卷调查对课程线上教学效果进行评价。结果表明,线上教学为学生提供了丰富灵活的学习方式,显著提高了学生的自主学习能力,扩大了学生的知识面,达到了较好的学习效果。     

Evaluation of adult and offspring thiamine deficiency in salmonine species from Lake Ontario

Thiamine Deficiency Complex (TDC) is an ongoing problem impacting salmonine health in various waterbodies, including Lake Ontario. The prevalence of TDC has been variable and explanations for differences are limited. In the current study, thiamine concentrations were measured in eggs, liver tissue, and muscle tissue sampled from brown trout (Salmo trutta), Chinook salmon (Oncorhynchus tshawytscha), coho salmon (O. kisutch), lake trout (Salvelinus namaycush), and steelhead trout (O. mykiss) that were collected from Lake Ontario and its surrounding tributaries. The occurrence of TDC was measured for each species based on TDC-induced offspring mortality rates under laboratory conditions. TDC-induced offspring mortality was observed for all species except brown trout. For affected species, egg free thiamine (Th) was consistently low compared to lake trout collected from Lake Superior that are considered thiamine replete. In addition, species with the lowest percentages of Th in their eggs were the most susceptible to TDC, suggesting that limited thiamine reserves in the form of Th may cause TDC-induced offspring mortality. Lastly, our results show that egg thiamine concentrations have yearly variation and increased for all species throughout the study. Reasons for such variation are undetermined; but, if egg thiamine concentrations continue to increase, the impacts of TDC on these salmonine species may lessen. Future monitoring is needed for determining if thiamine concentrations are increasing and the potential impacts that may have on the entire Lake Ontario fishery.     

Effect of preparation method on physicochemical properties and catalytic performances of LaCoO_3 perovskite for CO oxidation

Perovskite oxides LaCoO_3 prepared by templating, co-precipitation and sol-gel method with different complexants were systematically characterized and its catalytic performances for CO oxidation were investigated. The samples were characterized by X-ray diffraction, thermogravimetry analysis and differential scanning calorimetry, N_2 physisorption, transmission electron microscopy, temperature program reduction of hydrogen, temperature program desorption of oxygen and X-ray photoelectron spectroscopy measurement, results of which show that the properties of LaCoO_3, such as surface morphology, surface area, surface compositions, redox capability, oxygen vacancy, as well as the calcination temperature and formation mechanism, depend intimately on the preparation method. Catalytic tests indicate that the sample prepared by carbon templating method shows the best activity for CO oxidation, with full CO conversion obtained at 135 ℃. In particular, the catalyst can be activated and significant increase of activity can be obtained with the increase of reaction time. The cyclic and longterm stability of catalysts were discussed and compared.     

Influence of lanthanum on enhancement of mechanical and electrical properties of Cu-Al_2O_3 composites

Two kinds of Cu-Al_2O_3 composites(with and without La) were prepared via mechanical alloying-spark plasma sintering(MA-SPS) method. Microstructure, mechanical properties and electrical resistivity were investigated systematically using metallography, scanning electron microscopy, transmission electron microscopy, mechanical and electrical properties testing. The results indicate that an appropriate amount of La can homogenize the distribution of Al_2O_3. As such, yield strength, ultimate tensile strength and elongation of Cu-Al_2O_3-La are greatly increased. Some semi-coherent interface between Cu and Al_2O_3 is found, which means a low interface energy. The grain shape of Cu changes to irregular band with the addition of La. This change results in a density decrease of grain boundary and reduces electrical resistance. Lanthanum may exist in the form of La_2O_3.     

婚纱消费者购买偏好及影响因素分析——以北京地区女性为例

在婚纱市场的不断发展和完善中,消费者在其中起到了重要作用。文章研究了婚纱消费者购买偏好对婚纱业的推动作用,并以北京地区婚纱消费者为研究对象,提出婚纱产品描述、炫耀性消费心理、购买经验、婚纱产品知识四个关键影响因素,并通过阅读相关文献提出相关假设。运用问卷调查采集数据,构建了结构方程模型。研究表明,四要素与感知价值之间存在正相关,并与感知风险存在负相关;感知价值与消费者购买偏好之间存在正相关;感知风险与消费者购买偏好之间存在负相关;感知风险与感知价值存在中介作用。根据研究结果,文章提出相应对策。     

Methodology for dependence-based integrated constitutive modelling: An illustrative application to SiCp/Al composites

In industrial forming and machining process, the large plastic deformation of material takes place in wide loading ranges of strain-rate and forming temperature. A satisfactory modelling of quasi-static and dynamic material behaviors is of great importance for understanding physical process and processes optimization. A dependence-based integrated methodology, together with an improved weighted multi-objective parameter identification strategy is presented for the development of phenomenological constitutive model and the parameter identification using experimental data from quasi-static and dynamic tests with instantaneous strain rate variations and plastic strain-related temperature changes. The improved multi-objective parameter identification model is reformulated by introducing three weighting factors for valuing different measure errors and fit standard errors in individual objective function corresponding to each test, considering the sampling point number and active material parameter number under different loading conditions, and balancing optimization opportunity of quasi-static and dynamic sub-objective functions. The methodology is verified for feasibility through illustrative constitutive identification for SiC_p/Al composites. This may provide a methodology of constitutive modelling for predicting material behaviors in quasi-static and dynamic modes equally well.     

AlF3-modified LiCoPO4 for an advanced cathode towards high energy lithium-ion battery

Surface-interface reaction between the electrode and electrolyte plays a key role in lithium-ion storage properties, especially for high voltage cathode such as LiCoPO₄ and Ni-riched cathode. Generally, surface modification is an effective method to improve the electrochemical performance of electrode materials. Herein, in order to revise the LiCoPO₄ cathode with desirable properties, uniform AlF₃-modified LiCoPO₄ (LiCoPO₄@AlF₃) cathode materials in nano-sized distribution are synthesized. XRD result indicates that there is no structural transformation observed after AlF₃ coating. TEM characterization and XPS analysis reveal that the surface of LiCoPO₄ particle is coated by a nano-sized uniform AlF₃ layer. Further, the electrochemical results indicate that AlF₃ layer significantly improves the cycling and rate performances of LiCoPO₄ cathode within the voltage range of 3.0–5.0 V. After a series of optimization, 4 mol% AlF₃-coated LiCoPO₄ material exhibits the best properties including an initial discharge capacity of 159 mA h g^?1 at 0.1 C with 91% capacity retention after 50 cycles, especially a discharge capacity of 90 mA h g^?1 can be obtained at 1 C rate. CV curves indicate that the polarization of cathode is reduced by AlF₃ layer and EIS curves reveal that AlF₃ layer relieves the increase of resistance to facilitate Li-ion transfer at the interface between electrode and electrolyte during the cycling process. The enhanced electrochemical performances are attributed to that the AlF₃ layer can stabilize the interface between the cathode and electrolyte, form steady SEI film and suppress the electrolyte continuous decomposition at 5 V high voltages. This feasible strategy and novel characteristics of LiCoPO₄@AlF₃ could promise the prospective applications in the stat-art of special lithium-ion battery with high energy and/or power density.     

Integer programming methods for large-scale practical classroom assignment problems

In this paper we present an integer programming method for solving the Classroom Assignment Problem in University Course Timetabling. We introduce a novel formulation of the problem which generalises existing models and maintains tractability even for large instances. The model is validated through computational results based on our experiences at the University of Auckland, and on instances from the 2007 International Timetabling Competition. We also expand upon existing results into the computational difficulty of room assignment problems.     

Unraveling the attitudes on entrepreneurial universities: The case of Croatian and Spanish universities

The objective of this paper is to present evidence that there are different types of supportive faculty members. We conducted a case study on a sample of Croatian and Spanish universities by using an already tested ENTRE-U scale for measuring the faculty members' attitudes. These two scenarios are quite different in terms of their innovation systems, economic context and university system. We tested and found no evidence of any statistically significant difference due to the country. These two facts suggest the possible existence of an isomorphic trajectory when implementing entrepreneurial universities regardless the context. University managers should be aware of the existence of three different types of supportive individuals. Each of these groups requires a certain program of human resource development. This shifts the debate to how entrepreneurial universities should manage the tensions arising from the need of some degree of specialization in any of the three roles of the faculty members, namely teaching, researching and transfer of the knowledge stemming from research results.     

Precipitating spinel into precursor glass and its assistance in crystallization

The crystallization phenomena of spinel in CaO-MgO-Al₂O₃-SiO₂-Fe₂O₃ glass have received much attention due to the particular role in preparation of glass-ceramic materials, which represent an effective option to manage hazardous waste. In this study, both preliminary spinel and secondary spinel were precipitated in the precursor glass. The formation of these spinel was meticulously assessed by a combination of X-ray diffractometry and scanning electron microscopy. The structure of the microenvironment in the precursor glass was characterized by Raman spectrums. These advanced techniques highlight the potential for one-step crystallization of the glass. The investigation, which focused on one-step crystallization, demonstrated the growth of pyroxene on spinel accompanying a migration of chromium. The results also show the microstructure of the obtained glass-ceramic was very dependent on the heat-treat temperature. This study not only unambiguously reveals the precipitation mechanisms of spinel but also provides more documentation for one-step crystallization in the glass-ceramics field.