Lighting preferences in office spaces concerning the indoor thermal environment

The accurate prediction of the visual comfort zone in an indoor environment is difficult as it depends on many parameters. This is especially the case for large compact urban areas in which the density and shadow from neighboring buildings can limit the accessible daylighting in indoor spaces. This paper investigates the satisfaction range for illuminance regarding indoor air temperature in office buildings and the significant parameters affecting this range in six office buildings in Tehran, Iran. Lighting comfort has been evaluated by a subjective survey (509 total responses) and field measurement. The questionnaires were filled out in 146 and 109 rooms in summer and winter, respectively. The results show that the illuminance should not be less than 550 lx, while illuminance between 600 and 650 lx provides the highest satisfaction level. The satisfaction with lighting level is affected by individual parameters such as age, type of activity, and environmental parameters such as window orientation, external obscurations, and season. A relationship was observed between lighting level satisfaction and thermal condition acceptance, and the overall comfort depends more on thermal conditions than the lighting level.     

Lab scale optimization of various factors for photocatalytic hydrogen generation over low cost Cu0.02Ti0.98O2-δ photocatalyst under UV/Visible irradiation and sunlight

We have demonstrated earlier that maximum H₂ generated @ 1.167 l/h/m² over Cu_0.02Ti_0.98O_2-δ photocatalyst with apparent quantum efficiency, AQE of 7.5% and solar fuel efficiency, SFE of 3.9% under sunlight. With an aim to scale-up the solar photocatalytic hydrogen process to pilot plant, optimization studies at lab scale as well as in upscaled photoreactors were performed over Cu_0.02Ti_0.98O_2-δ, photocatalyst under UV/visible and sunlight. Cu_0.02Ti_0.98O_2-δ was synthesized by facile sol-gel route and characterized by relevant techniques. Several operational parameters were investigated in order to finalize the conditions which are most favourable for photocatalytic hydrogen yield. Factors such as photocatalyst loadings, v/v concentration of sacrificial reagent, replacement of methanol by industrial waste glycerol, role of different configuration of light source with reactor, effect of stirring during the photocatalytic reaction, effect of fluctuations of solar flux at hourly basis, illumination area on hydrogen yield were studied. Contribution of each factor in determining the hydrogen yield was quantified. Relative standard deviation in hydrogen yield as a function of each factor was estimated. Our findings suggest that in addition to catalyst loadings and sacrificial reagent, improved dispersion of photocatalyst obtained by stirring the reaction mixture in horizontal geometry resulted in enhanced H₂ yield. Hydrogen yield obtained at lab scale can be appropriately extrapolated with respect to illumination area instead of weight of photocatalyst. A relative standard deviation (RSD) of ± 3.82% and ± 4.53% in H₂ yield was calculated for sunny and cloudy days in time zone of 10.30–16.30 h IST. Deviation of H₂ yield was more on cloudy days and beyond 16:30 h. These studies have provided a daily window of 11:00–15:00 h to be utilized throughout the year for a commercial scaled up process, prohibiting the illumination during less productive hours of the day for shaping the improved economics of solar hydrogen generation. Our results obtained at lab scale would be useful to perform sunlight driven scaled –up photocatalytic process using low cost visible light efficient photocatalyst, Cu_0.02Ti_0.98O_2-δ.     

Microemulsion synthesis of ms/tz-BiVO4 composites: The effect of pH on crystal structure and photocatalytic performance

In this work, BiVO₄ composites, containing the tetragonal zircon phase (tz-BiVO₄), and monoclinic scheelite phase (ms-BiVO₄), were synthesized using the microemulsion method. The effect of pH on phase composition and photocatalytic activity were investigated. Based on X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), a ms/tz-BiVO₄ composite forms at pH = 1.0 and pure ms-BiVO₄ is obtained in the pH range 4.0–10.0. The three primary steps in preparing BiVO₄ were monitored by optical microscopy and the role played by the microemulsion on the phase composition of BiVO₄ is explained. Photoluminescence spectroscopy (PL), UV–visible diffuse reflectance spectroscopy (UV-DRS), Brunauer-Emmett-Teller (BET), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) were employed to characterize the physical and chemical properties of BiVO₄ composites. The composite formed at pH = 1 exhibited the lowest hole-electron (h⁺-e^-) recombination rate, resulting in the highest photocatalytic activity towards microcystin-LR (MC-LR), with near 100% removal of MC-LR in 5 h. ESR and trapping experiments indicated that MC-LR degradation was mediated primarily by hydroxyl radicals (•OH), superoxide radicals (O₂^•−) and photogenerated holes (h⁺).     

Effect of microstructure on the fatigue crack growth behaviour of a near-α Ti alloy

Fatigue crack growth behaviour of Ti–6Al–2Zr–1.5Mo–1.5V (VT-20 a near-α Ti alloy) was studied in lamellar, bimodal and acicular microstructural conditions. Fatigue crack growth tests at both increasing and decreasing stress intensity factor range values were performed at ambient temperature and a loading ratio of 0.3 using compact tension samples. Lamellar and acicular microstructures showed lower fatigue crack growth rates as compared to the bimodal microstructure due to the tortuous nature of cracks in the former and the cleavage of primary α in the latter. The threshold stress intensity factor range was highest for acicular microstructure.     

Synthesis,energy transfer mechanism,and tunable emissions of novel Na3La(VO4)2:Re3+ (Re3+ = Dy3+, Eu3+, and Sm3+) vanadate phosphors for near-UV-excited white LEDs

In this study, novel Eu³⁺-, Dy³⁺-, and Sm³⁺-activated Na₃La(VO₄)₂ phosphors were synthesized using a solid state reaction method. X-ray diffraction analysis results indicated that the Na₃La(VO₄)₂ phosphors had an orthorhombic crystal structure with the Pbc21 space group. There were two different La(1)O₈ and La(2)O₈ polyhedra with high asymmetry in the crystal structure. Scanning electron microscopy revealed that the product had a sheet morphology with an irregular particle size. Further, the luminescence properties, including the excitation and emission spectra, and luminescence decay curve, were investigated using a fluorescence spectrometer. The results showed that the Na₃La(VO₄)₂ compound was an excellent host for activating the luminescence of Eu³⁺ (614 nm), Dy³⁺ (575 nm), and Sm³⁺ (647 nm) ions. Further, Dy³⁺/Eu³⁺ co-doped Na₃La(VO₄)₂ phosphors were exploited, and the energy transfer from Dy³⁺ to Eu³⁺ was demonstrated in detail by the photoluminescence excitation, photoluminescence spectra, and luminescent decay curves. The results showed that the energy transfer efficiency from Dy³⁺ to Eu³⁺ was highly efficient, and the energy transfer mechanism was dipole–dipole interactions. Finally, tunable emissions from the yellow region of CIE (0.3925, 0.4243) to the red region of CIE (0.6345, 0.3354) could be realized by rationally controlling the Dy³⁺/Eu³⁺ concentration ratio. These phosphors may be promising materials for the development of solid-state lighting and display systems.     

Multivariate analysis of subjective evaluation of indoor lighting environment

Though subjective feelings affected by lighting have been studied a lot, multivariate experimental studies are lacking in this research field. Central composite rotatable design (CCRD) was applied to investigate the influence of illuminance, correlated color temperature (CCT) and illuminance uniformity on satisfaction in this study. A series of subject experiments were carried out and polynomial regression models of luminous satisfaction for different activity scenarios were generated. Illuminance and CCT affected the satisfaction significantly in visual task scenarios, and the effect of them was independent with each other, which was demonstrated by the regression model (R² = 0.89). The variation of luminous satisfaction in general activity scenarios cannot be fully explained by the three investigated factors. The results contributed to the knowledge of multivariate analysis of luminous environment and indicated that much could be expected referring to the application of CCRD in this field.     

预裂爆破减震机理及效果分析

本文将爆炸应力波以预裂缝高度将其分成上部应力波和底部应力波，分别应用节理刚度模型和应力波理论解释了预裂缝对其减弱和阻隔作用，从理论上说明了预裂爆破的减震机理，并进一步讨论了预裂缝宽度的影响和减震效果分析。     

GPJ-120型加压过滤机在太原选煤厂的应用

分析了太原选煤厂浮选精煤脱水系统存在的问题，介绍了应用加压过滤机后的工艺效果，实践证明，加压过滤机过滤处理能力大，滤饼水分低，自动化程度高。     

某铜矿5401残矿溶浸采矿初步研究

本文简要地介绍了本溶浸研究组对5401残矿溶浸采矿初步研究结果。内容包括工艺矿物学研究、浸出原理、浸出方法、浸出措施及效果。本文的发表将对高泥矿石的原地破碎浸出有一定的参考价值。     

独头工作面通风降温新方法及效果分析

在贯穿风流温度较低的矿井，可用通风的方法解决独头作业面的降温问题，并在分析常规局部通风存在诸多缺点的基础上，提出了用小型高压鼓风机与刚性轻质小断面PVC风筒配合的沐浴局部通风降温新方法，并对该方案的效果进行了分析和计算。结果表明，该 方案在理论上是可行的，并具有许多显著的优点。