以新发展理念引领高校专业基础课教学改革

以“创新、协调、绿色、开放、共享”为内核的新发展理念，是对马克思主义发展理念的继承和发扬，极具时代精神，富含问题意识，为高校思想政治教育发展、教育教学改革实践提供了强大的理论支撑。本文以“通信原理”为例，阐述了新发展理念在课程改革中的思路和方法，实现了思想政治教育与专业基础课程有机融合，为深化高校教学改革、创新人才培养模式提供了思路。     

A novel combustion fuel for the synthesis of nanocrystalline ZnAl2O4 particles based on the thermodynamic correlations and their structural and optical studies

ZnAl₂O₄ nanocrystalline particles were prepared using the solution combustion method using a new combustion fuel, Leucine. The prepared samples' structural, microstructural–elemental composition, and optical characteristics were investigated using XRD, SEM-EDS, and UV–Visible spectroscopy. As-synthesized ZnAl₂O₄ nanoparticles are polycrystalline, with no secondary phases, and crystallized in a cubic - spinel structure. The polycrystalline nature of the prepared sample is due to the exothermicity of fuel and oxidizer, which demonstrate that the fuel utilized (Leucine) provided adequate energy for the production of nanoparticles in their as-synthesized form, as supported by adiabatic temperature through thermodynamic calculations. The thermodynamic calculations also include a universal method to estimate the specific heat capacity at constant pressure. Furthermore, even after 2 h of calcination at 600 °C, ZnAl₂O₄ exhibits a single phase with no secondary phases, indicating the material stability and single-phase nature. The crystallinity of ZnAl₂O₄ nanoparticles was observed to increase with increasing annealing temperature. SEM micrographs of as-synthesized samples exhibit the formation of dense particles, voids, and pores in the as-synthesized sample. In addition, tiny aggregates were detected on the surface of more prominent clusters, which reduced as the calcination progressed. In addition, calcined samples exhibit a greater optical reflectance than as-synthesized samples. Tauc's graphs were used to compute the optical energy bandgap. The calculated energy band gap is redshifted to that of the bulk material. The bandgap energy decreases upon calcination, suggesting that the prepared materials have a larger crystallite size or more crystallinity. Correlations were found between the T_ad, and the structural and optical properties of the prepared samples. The findings suggest that Leucine could be used as a novel combustion fuel to produce crystalline ZnAl₂O₄ nanoparticles in their as-synthesis form.     

Effect of preparation method on physicochemical properties and catalytic performances of LaCoO_3 perovskite for CO oxidation

Perovskite oxides LaCoO_3 prepared by templating, co-precipitation and sol-gel method with different complexants were systematically characterized and its catalytic performances for CO oxidation were investigated. The samples were characterized by X-ray diffraction, thermogravimetry analysis and differential scanning calorimetry, N_2 physisorption, transmission electron microscopy, temperature program reduction of hydrogen, temperature program desorption of oxygen and X-ray photoelectron spectroscopy measurement, results of which show that the properties of LaCoO_3, such as surface morphology, surface area, surface compositions, redox capability, oxygen vacancy, as well as the calcination temperature and formation mechanism, depend intimately on the preparation method. Catalytic tests indicate that the sample prepared by carbon templating method shows the best activity for CO oxidation, with full CO conversion obtained at 135 ℃. In particular, the catalyst can be activated and significant increase of activity can be obtained with the increase of reaction time. The cyclic and longterm stability of catalysts were discussed and compared.     

Consumers’ willingness to pay for upcycled foods

Research on food waste reduction suggests that solutions aimed at reducing waste early in the consumption cycle are the most impactful. Based on this premise, food research labs and food manufacturers have started creating and selling foods made from food ingredients that are generally discarded. Such foods, termed upcycled foods, are safe for human consumption and provide a promising solution to reduce food waste. However, the commercial success of this new category of foods will depend on consumers’ acceptance. This research examines a key indicator of acceptance – consumers’ willingness to pay. We find that although consumers are willing to pay less for upcycled foods compared to conventional alternatives, messaging increases consumers’ willingness to pay. Specifically, we find that rational messaging is more effective than emotional messaging. Overall, our findings suggest that upcycled foods may command good acceptance among consumers.     

新型冠状病毒疫情对我国电力行业的影响分析

全球经验表明,疫情会对经济社会产生负面影响。此次中国武汉市新型冠状病毒疫情爆发的时间节点、波及的领域范围,以及为应对疫情釆取的相关部署安排,既考验着电力行业保障电力安全可靠供应的能力,也会直接或间接通过电力供求形势变化影响电力企业的生产运行。结合疫情因素和近年来中国经济运行中电力供求变化特点,本文认为疫情将会降低工业和商业用电负荷,医疗机构新增用电和居民生活用电将会显著增长,但鉴于工商业用电比重较高的事实,全社会用电量同期同比增速将明显放缓。考虑到近年来用电增速放缓的经验事实,此次疫情或将放大电力行业积聚的矛盾和困难,因此为发挥市场在电力资源配置中的决定性作用而加快推进电力体制改革和全国统一电力市场建设愈发重要与迫切。     

Notch radius effect on fracture toughness of ceramics pertinent to grain size

Unlike fracture toughness, the notch fracture toughness of a ceramic is not a constant; rather, it increases with the notch-root radius ρ in a notched specimen. In this study, by analyzing the fracture measurements of eight different notched ceramics with an average grain size G of 3–40 μm, a simple model describing the relation between the notch fracture toughness and fracture toughness is proposed as a function of the relative notch-root radius ρ/G. The normal distribution is incorporated to consider the inevitable scatter in measurements where fracture mechanisms and errors are present. The results demonstrate that the model can effectively predict the quasi-brittle fracture variation trend for ceramics, including the upper and lower bounds, with 96% reliability, from a normal distribution; thus, it can address virtually all of the experimental data. We also determined that the notch fracture toughness approximates the fracture toughness if ρ ≤ G.     

Rural idylls and urban economies: the making of metropolitan wine regions

In our quest to understand wine industries and their location and development worldwide, much emphasis has been given to key environmental, cultural and economic factors. The concept of terroir is used widely to describe, delimit and promote favoured wine regions. In this, we see constructions of rurality that tend to render invisible important connections between wine regions and urban places. However, many if not most wine regions owe much to their urban neighbours. Cities are sources of labour, capital and customers. Indeed, many wine regions are, in effect, metropolitan wine regions that owe as much to their proximity to cities than they do to any putative environmental distinctiveness and advantages. Wineries in such places develop strategies to survive and prosper not by producing bottles of wine that are widely sold on global markets – and compete on the basis on price or global reputation – but rather because they develop strong and loyal local markets tied to urban economies and because they appeal to the rural idylls held by urban consumers. This paper explores the way urban places have been critical in the development of certain wine regions in New Zealand.     

新工科理念下“扩频通信技术与应用” 课程教学实践

本文以“扩频通信技术与应用”课程为例，探讨新工科理念下工程学科实践教学改革，具体措施包括：开展虚拟仿真实验，充分发挥双师型教师的主观能动性，开展MATLAB仿真训练、工程技术实训及相关的创新创业训练，结合企业实习以及开展国际交流合作等。     

Lithium metal hydrides (Li2CaH4 and Li2SrH4) for hydrogen storage; mechanical,electronic and optical properties

Hydrogen storage is a critical step for commercialisation of hydrogen consumed energy production. Among other storage methods, solid state storage of hydrogen attracts much attention and requires extensive research. This study rationally and systematically designs novel solid state hydrides; Li₂CaH₄ (GHD is obtained as −6.95 wt %) and Li₂SrH₄ (GHD is obtained as −3.83 wt %) using computational method. As a first step, we suggest and predict crystal structures of solid state Li₂CaH₄ and Li₂SrH₄ hydrides and look for synthesizability. Then, the mechanical stabilities of hydrides are identified using elastic constants. Both hydrides fulfil the well-known Born stability criteria, indicating that both Li₂CaH₄ and Li₂SrH₄ are mechanically stable materials. Several critical parameters, bulk modulus, shear modulus, Cauchy pressures, anisotropy factors of hydrides and bonding characteristics are obtained and evaluated. Furthermore, electronic and optical band structures of hydrides are computed. Both Li₂CaH₄ and Li₂SrH₄ have indirect bands gaps as 0.96 eV (Г-U) and 1.10 eV (Г-R). Thus, both materials are electronically semiconducting. Also, Bader charge analysis of hydrides have been carried out. Charge density distribution suggests an ionic-like (or polarized covalent) bonding interaction between the atoms.     

Inverted pendulum stabilization: Characterization of codimension-three triple zero bifurcation via multiple delayed proportional gains

The paper considers the problem of stabilization of systems possessing a multiple zero eigenvalue at the origin. The controller that we propose, uses multiple delayed measurements instead of derivative terms. Doing so, we increase the performances of the closed loop in presence of system uncertainties and/or noisy measurements. The problem formulation and the analysis is presented through a classical engineering problem which is the stabilization of an inverted pendulum on a cart moving horizontally. On one hand, we perform a nonlinear analysis of the center dynamics described by a three dimensional system of ordinary differential equations with a codimension-three triple zero bifurcation. On the other hand, we present the complementary stability analysis of the corresponding linear time invariant system with two delays describing the behavior around the equilibrium. The aim of this analysis is to characterize the possible local bifurcations. Finally, the proposed control scheme is numerically illustrated and discussed.