汽油气相色谱模拟馏程的应用

介绍了用AC8612气相色谱仪对六个汽油组分馏程分析的应用情况,结果表明:该方法的重复性和准确性都较好,与D86相比,结果满足方法的再现性要求,但对于差值大于3℃的点,应定期进行修正,以使结果更准确,该方法用于炼油厂各装置汽油组分馏出口的日常质量监测分析,可以提高分析效率并减少劳动强度。     

一种磁控管用扼流线圈仿真设计

采用电路仿真软件仿真滤波组件S参数曲线,观察曲线随器件参数的变化;介绍利用三维全波电磁仿真软件HFSS简化设计流程的方法,并与测试结果对比。结果表明:利用3D仿真软件在满足器件设计精度的同时可以简化线圈的设计流程。     

翅果油超临界CO2流体萃取工艺优化及其不同提取方法的比较

对翅果油的超临界CO_2流体萃取工艺条件进行研究。在单因素试验的基础上,以萃取压力、萃取温度、萃取时间和原料粒度为影响因素,以翅果油得率为指标,采用正交试验优化工艺条件。比较了浸出法、超临界CO_2流体萃取法、冷榨法和热榨法4种不同提取方法对翅果油得率和微量活性成分的影响。结果表明:超临界CO_2流体萃取翅果油最优工艺条件为萃取压力30 MPa、萃取温度50℃、萃取时间150 min、原料粒度80目,此条件下翅果油得率为(28. 32±1. 15)%; 4种提取方法中,浸出法的翅果油得率、VE及甾醇含量最高,其次是超临界CO_2流体萃取法,除热榨法的翅果油角鲨烯含量最高外,压榨法的其他指标均最低。     

道路用聚氨酯改性沥青的制备工艺探讨

结合不同改性剂掺量单因素试验,确定了采用88mm叶轮、115mm容器、圆盘锯齿式搅拌器(转速1400r/min)、175℃共混温度、改性剂掺量4.27%、单次搅拌300g的制备工艺参数。在此条件下制备的聚氨酯改性沥青具有优异的水稳定性、储存稳定性且耐老化、耐高温,拥有比普通聚合物改性沥青更高的车辙因子G*/sinδ和15℃动态模量,基本满足高模量沥青要求。     

浅谈彩色沥青混凝土在路面工程中的使用

公路建设不断发展，对公路的要求越来越高。彩色沥青混凝土有多种特殊用途，被广泛应用和普及。本文就彩色沥青混凝土的应用进行了分析研究。     

Cryptographic Lightweight Encryption Algorithm with Dimensionality Reduction in Edge Computing

Edge Computing is one of the radically evolving systems through generations as it is able to effectively meet the data saving standards of consumers, providers and the workers. Requisition for Edge Computing based items have been increasing tremendously. Apart from the advantages it holds, there remain lots of objections and restrictions, which hinders it from accomplishing the need of consumers all around the world. Some of the limitations are constraints on computing and hardware, functions and accessibility, remote administration and connectivity. There is also a backlog in security due to its inability to create a trust between devices involved in encryption and decryption. This is because security of data greatly depends upon faster encryption and decryption in order to transfer it. In addition, its devices are considerably exposed to side channel attacks, including Power Analysis attacks that are capable of overturning the process. Constrained space and the ability of it is one of the most challenging tasks. To prevail over from this issue we are proposing a Cryptographic Lightweight Encryption Algorithm with Dimensionality Reduction in Edge Computing. The t-Distributed Stochastic Neighbor Embedding is one of the efficient dimensionality reduction technique that greatly decreases the size of the non-linear data. The three dimensional image data obtained from the system, which are connected with it, are dimensionally reduced, and then lightweight encryption algorithm is employed. Hence, the security backlog can be solved effectively using this method.     

Mg-5Y-3Sm-0.8Ca-0.5Sb合金的高温蠕变行为

采用蠕变实验和理论计算,研究了时效态Mg-5Y-3Sm-0. 8Ca-0. 5Sb合金在250～300℃和50～70 Pa条件下的蠕变行为。结果表明,该合金具有良好的抗高温蠕变性能,其在300℃和70 MPa下的稳态蠕变速率为3. 28×10-8s-1。在50～70 MPa的应力下,当温度由250℃升到300℃时,应力指数由2. 30变为3. 22;在250～300℃的温度下,当应力由50 MPa升到70 MPa时,蠕变激活能由65. 4 kJ/mol变为81. 0 kJ/mol。     

Comparisons with high viscosity additive effects on base and modified asphalt

In this research, three types of high viscosity additives with different volumes were added to both 70# base asphalt and SBS modified asphalt, the dynamic viscosity and high temperature performance tests were conducted. The results show that with the same volume and type of the additive, SBS modified asphalt has a much higher dynamic viscosity and high temperature grade than those of the base asphalt. When the volume of each additive type increases from 0% to 12%, the dynamic viscosity would increase in a different trend, which could be described as three stages with different increasing speeds, and the variability and the demarcation point of the adjacent two stages depend on the asphalt modification, additive type and the volume. With regard to the high temperature grade, it was found that the effect of different additive types on high temperature performance should be separated from asphalt modification.