基于DELPHI的镍氢电池管理系统软件设计

通过对镍氢电池性能的研究，给出了一个应用ISA总线技术构建的、基于DELPHI编程平台的镍氢电池管理系统的设计方案，重点介绍了该系统的软件技术和实现方法。     

台达现场总线产品在中央空调系统的应用

本文通过案例详尽论述台达DeviceNet现场总线产品在中央空调系统的工程设计技术，展示出台达DeviceNet现场总线产品的系统集成优势。     

L波段窄脉宽500W固态功放组件的设计

介绍了作者研制的应用于固态雷达发射机上的L波段500W固态功放组件的工作原理、用途及其主要技术指标。描述了功放组件的设计过程和测试结果。该功放组件在窄脉宽条件下实现了快速上升沿,性能优良,工作稳定可靠。     

岩样自然伽玛能谱的数据库管理系统

本文阐述了岩样自然伽玛能谱数据库管理系统的功能、结构、特点以及它在研究自然伽玛能谱与岩性参数间关系中的应用，为自然伽玛能谱测井的资料解释奠定了理论基础。     

最新水冷式全固态数字调幅600kW中波发射机

数字调幅制式是当前国际上较先进的调制技术，ＤＸ系列全固态数字调幅中波发射机的电声指标和工业效率都是很先进的，过去的ＤＸ大功率机采用风冷方式，本文介绍了最新水冷ＤＸ－６００发射机的设备情况和技术特点。     

Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

十三陵蓄能电站上水库自动监测系统的设计及运行

由于十三陵蓄能电站上水库地处蟒山之巅，所在山体地质条件复杂。施工期埋设了大量的监测仪器，原有人工监测系统效率低、资料分析的同步性差。2002年5月，对其进行了自动化改造，现已有一套符合其特点的自动化监测系统。十三陵上水库水工建筑自动监测系统已正常运行了三年，同时也存在着问题，有待于进一步的探讨和改进。     

桃林口水库大坝人工监测项目管理软件的开发与应用

介绍了桃林口水库大坝人工监测项目管理软件研制的意义。对软件结构、开发环境、基本计算原理、主要功能进行了详细阐述；并以大坝垂直位移分析为例,详细讲述了回归分析在资料分析中的具体应用。该软件的应用使工程管理水平上了一个新台阶。     

橇装式模块化注聚合物站的设计

针对以往固定式注聚站建设和运行所存在的问题 ,成功设计了橇装式模块化注聚合物站 ,将注聚合物工艺所需的地面设备和装置均以橇装形式集中于 6～ 7个橇块 ,实现了注聚站的模块化、整体快速搬迁和现场快速连接施工 ,有利于设备运行、管理和阶段移动配注作业。对装置的基本流程和配置 ,以及基本参数的确定做了详细阐述。现场应用情况表明 ,该注聚站完全满足注聚合物工艺要求。与常规注聚站相比 ,不但造价降低 ,而且在减少现场作业量及设备再利用等方面有了明显的改善     

PV module dynamic impedance and its voltage and frequency dependencies

The paper presents a derivation of the dynamic impedance of a PV module. At each bias voltage, the general form of the impedance describes a semicircular locus in the complex impedance plane. Intercepts of each impedance locus yield series, shunt and dynamic resistance of a module. Determinations of the dynamic impedance of a x-Si PV module in the dark with five reverse bias voltages and over a frequency range of 1 Hz to 60 kHz are made. The experimental results validate the derived general form of dynamic impedance.