Analysis of pressure and heat distribution in a dilating or contracting filter chamber with two outlets using multivariate spectral quasilinearization method

The development of efficient filters is an essential part of industrial machinery design, specifically to increase the lifespan of a machine. In the filter chamber design considered in this study, the magnetic material is placed along the horizontal surface of the filter chamber. The inside of the filter chamber is layered with a porous material to restrict the outflow of unwanted particles. This study aims to investigate the flow, pressure, and heat distribution in a dilating or contracting filter chamber with two outlets driven by injection through a permeable surface. The proposed model of the fluid dynamics within the filter chamber follows the conservation equations in the form of partial differential equations. The model equations are further reduced to a steady case through Lie's symmetry group of transformation. They are then solved using a multivariate spectral-based quasilinearization method on the Chebyshev–Gauss–Lobatto nodes. Insights and analyses of the thermophysical parameters that drive optimal outflow during the filtration process are provided through the graphs of the numerical solutions of the differential equations. We find, among other results, that expansion of the filter chamber leads to an overall decrease in internal pressure and an increase in heat distribution inside the filter chamber. The results also show that shrinking the filter chamber increases the internal momentum inside the filter, which leads to more outflow of filtrates.     

Hall current effects on MHD flow of chemically reacting fluid through a porous medium with heat source

We considered the magnetohydrodynamic (MHD) free convective flow of an incompressible electrically conducting viscous fluid past an infinite vertical permeable porous plate with a uniform transverse magnetic field, heat source and chemical reaction in a rotating frame taking Hall current effects into account. The momentum equations for the fluid flow during absorbent medium are controlled by the Brinkman model. Through the undisturbed state, both the plate and fluid are in a rigid body rotation by the uniform angular velocity perpendicular to an infinite vertical plate. The perpendicular surface is subject to the homogeneous invariable suction at a right angle to it and the heat on the surface varies about a non-zero unvarying average whereas the warmth of complimentary flow is invariable. The systematic solutions of the velocity, temperature, and concentration distributions are acquired systematically by utilizing the perturbation method. The velocity expressions consist of steady-state and fluctuating situations. It is revealed that the steady part of the velocity field has a three-layer characteristic while the oscillatory part of the fluid field exhibits a multi-layer characteristic. The influence of various governing flow parameters on the velocity, temperature, and concentration are analyzed graphically. We also discuss computational results for the skin friction, Nusselt number, and Sherwood number in the tabular forms.     

A triptycene derived hypercrosslinked polymer for gas capture and separation applications

This work describes facile synthesis of a porous polymeric material ( T-HCP ) using readily available reagents. Specifically, T-HCP is a thermally stable and hypercrosslinked polymer (HCP) that is essentially microporous with a high BET specific surface area (940 m² g^?1). Triptycene based polymers are known to feature internal free volume. Thus, the incorporation of triptycene units and extensive crosslinking by an external cross-linker in T-HCP makes it a promising adsorbent for small gas capture applications. Experimental results show that T-HCP demonstrated good CO₂ capture capacity of 132 mg g^?1 (273 K, 1 bar). Molecular hydrogen storage capacity of T-HCP is estimated to be 17.7 mg g^?1 (77 K, 1 bar). T-HCP revealed high CO₂/N₂ selectivity (up to 63) as well as promising CO₂/CH₄ (up to 9.1) selectivity suggesting its potential applicability for CO₂ separation from flue and natural gases.     

One-step synthesis of Co2P/N-P co-doped porous carbon composites derived from soybean derivatives as acidic and alkaline HER electrocatalysts

Developing inexpensive and efficient electrocatalysts for hydrogen evolution reaction (HER) in both acidic and alkaline mediums is of great significance to the hydrogen energy industry. Hereby, we prepared a mixture of precursors with homogeneous composition by using the chelating ability of soybean protein isolate (C and N source) and phytic acid (dopant and phosphating agent) with cobalt ions, and achieved one-step synthesis and construction of Co₂P/N–P co-doped porous carbon composite by carbonization at 800 °C. The as-synthesized Co₂P/NPPC-800 electrocatalyst exhibits low HER overpotentials of 121 and 125 mV at 10 mA cm^?2 in 0.5 M H₂SO₄ and 1.0 M KOH, which are close to those of the commercial Pt/C catalyst. Additionally, the NPPC substrate surrounding the Co₂P could diminish the corrosion during the HER, and Co₂P/NPPC-800 displays good stability and durability. Furthermore, this work offers a convenient synthesis strategy for phosphide/doped porous carbon composites in other electrochemical energy technologies.     

饱和块状混合回填土地基的一维固结分析

用块状渣土置换软弱地基和回填低洼谷地等是处置工程渣土的有效途径。为了分析饱和块状混合回填土地基的固结性状，运用混合物理论建立了其一维固结模型。首先，假定块状土固相和充填土固相之间满足等应变条件，获得了饱和块状混合回填土中各相应变与块状土孔隙变形和充填土孔隙变形的关系式。其次，在小应变条件下，根据自由能势函数方程建立了饱和块状混合回填土的一维线弹性本构方程，再结合达西定律和应力平衡方程获得了一维固结控制方程。再次，利用分离变量法得到一维固结解析解，通过退化本文模型与已有模型进行对比，验证了本文模型的正确性。最后，基于所得解析解，分析了充填土孔隙渗透系数、块状土孔隙渗透系数以及流体交换参数等因素对饱和块状混合回填土地基固结性状的影响。分析结果表明：充填土孔隙渗透系数对饱和块状混合回填土地基整体固结性状起主导作用；在固结初期，块状土超孔压会有一定程度的上升，且3个参数具有相似的作用机理。     

Effect of the particle size ratio on macro- and mesoscopic shear characteristics of the geogrid-reinforced rubber and sand mixture interface

As a new type of material for civil engineering projects, the rubber and sand mixture is widely used in roadbed fillers, offering environmental benefits over traditional tyre disposal methods. This study uses a large-scale direct shear apparatus to examine the interface shear properties of the geogrid-reinforced rubber and sand mixture, considering different particle size ratios (r), rubber contents, and normal stresses. Based on indoor tests, direct shear models of the mixture with different values of r are established in PFC^3D, revealing the meso-mechanical mechanism of the mixture in the direct shear process. The results show that when r is greater than 1, incorporating a certain amount of rubber particles can increase the shear strength of the mixture. The r values of 15.78, 7.63, and 3.98 correspond to an optimal rubber content of 30%, 10%, and 20%, respectively. When r is less than 1, mixing rubber particles can only reduce the shear strength of the mixture. When the rubber content is low, the smaller the value of r, the greater is the thickness of the shear band. Furthermore, the normal and tangential contact forces are greater. The fabric anisotropy evolution law of the mixture is consistent with the change in the contact force distribution.     

羟基磷灰石作为催化材料的研究进展

羟基磷灰石(HAP)由于具有无毒性、生物相容性、热稳定性、吸附性、离子交换性、结构稳定性等,因而被广泛应用到催化剂的制备中。作为一种新型催化材料,HAP的特殊晶体结构对一些反应表现出催化活性,并且经过改性、负载等方法处理过后的HAP催化剂显示出独特的催化优势。基于近年来HAP在催化邻域的发展,综述了HAP作为催化材料在降解污染物、制氢、药物合成、还原氮氧化物等反应中的不同应用,并对未来的研究方向进行了展望。     

Synthesis and plasma treatment of nitrogen-doped graphene fibers for high-performance supercapacitors

Graphene fiber-based supercapacitor has aroused great interest as a flexible power source in future wearable electronics. However, the low electrochemical performance of graphene fibers (GFs) usually causes the serious limitation of use in practical applications due to the material stacking, hydrophobicity and fabrication process complexity. In this work, a facile and effective plasma-assisted strategy is put forward to increase specific surface area, tune hierarchically porous structure and promote wettability of nitrogen-doped graphene fibers (NGFs), resulting in the improvement of electrochemical performance. The supercapacitor assembled from plasma-treated NGFs shows superior capacitance (878 mF/cm² at 0.1 mA/cm² current density) and high energy density (19.5 μW h/cm² at 40 mW/cm² power density), which is 23.7% and 131.4% higher than that of NGFs and GFs, respectively. Additionally, the fiber-based supercapacitor based on plasma-treated NGFs exhibits high rate capability of 59.8% and excellent cyclic performance (95.8% retention over 10,000 cycles). These plasma-treated NGFs can be promising candidates for high-performance and flexible power sources in future wearable electronics.     

混合概率模型驱动的叠前地震反演方法

叠前地震反演是获取复杂油气储层弹性参数、岩性及含流体性质的主要途径。常规的叠前地震反演往往将“弹性参数”、“离散岩性”和“流体因子”三者独立预测，通常忽视了储层岩性差异对弹性参数的影响，由此引入的先验信息误差会严重影响弹性参数、离散岩性及流体指示因子预测的精度。为此，考虑待反演模型参数的先验概率服从混合型概率密度分布，基于贝叶斯框架推导了由时域、频域地震、低频整合先验信息及已知模型数据点四类数据集协同约束的后验混合概率分布的显式解，将非线性边界约束算法引入叠前地震弹性参数反演中，缓解了模型反演出现不稳定解的问题；利用序贯模拟算法对后验概率密度函数随机采样，且对不同后验概率分量的模拟结果进行分类，发展了对地层连续“弹性参数”、“离散岩性”及储层“流体因子”的叠前地震同步预测方法。理论测试和实际应用验证了该方法在岩性预测和储层孔隙流体识别中的有效性和实用性。     

Hydrogen and carbon allotrope production through methane cracking over Ni/bimodal porous silica catalyst: Effect of nickel precursor

Nickel-based catalyst is highly active for hydrogen production through methane cracking reaction at moderate reaction temperature. However, Ni catalyst is easily deactivated by carbon encapsulation. In order to solve this problem, this research studies the effect of nickel precursors—nickel acetate (NA), nickel carbonate (NC) and nickel nitrate (NN)—on the activity and stability of nickel/bimodal porous silica (Ni/BPS) catalyst in methane cracking reaction. It was found that these nickel precursor solutions had different pH values, resulting in different interactions between surface silanol groups of BPS supports and Ni. Among these catalysts, Ni(NC)/BPS catalyst exhibited high nickel dispersion and weak interaction between Ni and BPS support; it then gave the highest CH₄ conversion and better stability compared to the other catalysts. In addition, H₂ yield of Ni(NC)/BPS catalyst was 2.90 and 1.40 times higher than those of Ni(NA)/BPS and Ni(NN)/BPS catalysts, respectively. Moreover, carbon nanofibers were grown in Ni(NC)/BPS and Ni(NN)/BPS catalysts, whereas carbon nanotubes were formed on Ni(NA)/BPS catalyst, due to the different nickel particle sizes, dispersions, and Ni—BPS support interactions.