冷低压分离器油相系统铵盐垢下腐蚀风险的模拟预测

为探究某加氢装置高压换热器管束腐蚀泄漏原因，利用Aspen Plus工艺模拟软件计算了冷低压分离器油相（简称冷低分油）中水质量分数分别为1%,2%,3%时，冷低分油系统的露点温度、氯化铵结晶温度、氯化铵潮解点温度和相对湿度。结果表明：相较于经验的露点温度预测方法，通过引入潮解点、划分系统“湿环境”温度范围判断氯化铵垢下腐蚀风险区域的方法与实际腐蚀案例更为切合；在3种油相含水条件下，换热器管束存在氯化铵垢下腐蚀的“湿环境”温度范围分别为：50~103 ℃,50~161 ℃,50~176 ℃；随着油相中含水量的提高，“湿环境”腐蚀区域逐渐向高温部位迁移，预计铵盐导致的垢下腐蚀将会愈加严重。     

PID Control of Planar Nonlinear Uncertain Systems in the Presence of Actuator Saturation

This paper investigates PID control design for a class of planar nonlinear uncertain systems in the presence of actuator saturation. Based on the bounds on the growth rates of the nonlinear uncertain function in the system model, the system is placed in a linear differential inclusion. Each vertex system of the linear differential inclusion is a linear system subject to actuator saturation. By placing the saturated PID control into a convex hull formed by the PID controller and an auxiliary linear feedback law, we establish conditions under which an ellipsoid is contractively invariant and hence is an estimate of the domain of attraction of the equilibrium point of the closed-loop system. The equilibrium point corresponds to the desired set point for the system output. Thus, the location of the equilibrium point and the size of the domain of attraction determine, respectively, the set point that the output can achieve and the range of initial conditions from which this set point can be reached. Based on these conditions, the feasible set points can be determined and the design of the PID control law that stabilizes the nonlinear uncertain system at a feasible set point with a large domain of attraction can then be formulated and solved as a constrained optimization problem with constraints in the form of linear matrix inequalities (LMIs). Application of the proposed design to a magnetic suspension system illustrates the design process and the performance of the resulting PID control law.      

Designing amorphous formulations of polyphenols with naringin by spray-drying for enhanced solubility and permeability

Naringin (NAR), a major flavanone (FVA) glycoside, is a component of food mainly obtained from grapefruit. We used NAR as a food additive to improve the solubility and permeability of hydrophobic polyphenols used as supplements in the food industry. The spray-dried particles (SDPs) of NAR alone show an amorphous state with a glass transition temperature (T_g) at 93.2 °C. SDPs of hydrophobic polyphenols, such as flavone (FVO), quercetin (QCT), naringenin (NRG), and resveratrol (RVT) were prepared by adding varying amounts of NAR. All SDPs of hydrophobic polyphenols with added NAR were in an amorphous state with a single T_g, but SDPs of hydrophobic polyphenols without added NAR showed diffraction peaks derived from each crystal. The SDPs with NAR could keep an amorphous state after storage at a high humidity condition for one month, except for SDPs of RVT/NAR. SDPs with NAR enhanced the solubility of hydrophobic polyphenols, especially NRG solubility, which was enhanced more than 9 times compared to NRG crystal. The enhanced solubility resulted in the increased membrane permeability of NRG. The antioxidant effect of the hydrophobic NRG was also enhanced by the synergetic effect of NAR. The findings demonstrated that NAR could be used as a food additive to enhance the solubility and membrane permeability of hydrophobic polyphenols.     

Comparison of γ-aminobutyric acid accumulation capability in different mung bean (Vigna radiata L.) varieties under heat and relative humidity treatment,and its correlation with endogenous amino acids and polyamines

In this study, the accumulation of GABA and its inherent factors across different varieties of mung bean (Vigna radiata L.) in response to heat and relative humidity (HRH) were investigated. Results showed the average GABA content in mung bean varieties was increased 7.52 times following HRH treatment, and the black mung bean variety (A8) exhibited the highest GABA accumulation capability (1.76–84.57 mg per 100 g DW). From the perspective of GABA shunt metabolites, the free glutamic acid content of mung beans significantly decreased (P < 0.05) after HRH treatment and presented a significant correlation (P < 0.05) with GABA content. In polyamine degradation pathway, although the average levels of spermine and spermidine of mung bean varieties significantly decreased (P < 0.05) after HRH treatment, no significant correlation with GABA content was identified. Hence, the GABA accumulation was predominantly attributed to GABA shunt. Besides, free amino acids including glutamic acid, serine, ornithine, arginine and glycine in mung beans showed a significant positive correlation (P < 0.05) with GABA content and increment following HRH treatment, which suggested that mung beans enriched in these free amino acids might accumulate higher amounts of GABA after HRH treatment and be useful for industrial applications.     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

相对湿度和开孔对纸蜂窝芯层抗压强度的影响

对无孔、开孔蜂窝芯纸条和5种纸蜂窝芯层进行静态压缩实验,研究了相对湿度和开孔(圆孔直径、圆孔数量)对蜂窝芯纸条纵向和横向环压强度以及纸蜂窝芯层抗压强度的影响规律,采用多元线性回归分析法和SPSS软件评估了相对湿度和圆孔直径对蜂窝芯纸条纵向和横向环压强度的影响,探讨了长度缺陷率与环压强度系数之间的经验关系。实验结果表明,无孔和开孔蜂窝芯纸条的纵向环压强度是横向环压强度的1.4~1.5倍;蜂窝芯纸条纵向和横向环压强度以及纸蜂窝芯层的抗压强度都随着相对湿度、圆孔直径和圆孔数量的增加而降低,且双孔蜂窝芯纸条的纵向环压强度和双孔纸蜂窝芯层的抗压强度更易受相对湿度的影响;在相对湿度和开孔的综合影响下,纸蜂窝芯层适合开圆孔直径为2 mm或3 mm的单孔。     

亲油型聚结滤芯饱和度预测模型研究

纤维聚结滤芯广泛用于压缩空气净化、发动机曲轴箱通风、加工和切割等一系列工艺过程中，用于除去气流中的液体气溶胶颗粒。由于聚结滤芯饱和度对于过滤效率及阻力具有重要影响，因此建立饱和度与滤材参数及操作条件之间的关系将有助于优化滤芯结构并提高过滤性能。目前实际工业用聚结滤芯通常由多层微米级玻璃纤维材料组成，然而现有计算模型无法用于此类滤芯的饱和度预测。因此，本文基于多种常用亲油型聚结滤芯压降及饱和度实验测试结果，根据“跳跃-通道”模型及毛细管理论建立了新的饱和度预测模型。通过与大量已发表文献数据对比发现，当饱和值大于0.2时，预测值与实验结果吻合度较好，相对偏差≤20%。随着饱和度的降低，滤芯润湿区域和非润湿区域之间界限逐渐明显，此时无需对毛细管半径进行修正。然而，新模型仍然要依靠压降测量值进行计算，这一问题需在后续工作中加以解决。     

翅片结构对单向开缝翅片管换热器传热与阻力性能的影响

通过对不同开缝数量、不同相对开缝高度的单向开缝翅片管换热器进行模拟,分析开缝数量、相对开缝高度对单向开缝翅片管换热器传热与阻力性能的影响规律。结果表明:在开缝数量为3～7片时,翅片侧Nu和f因子随着开缝数量的增加而增大,但Nu增幅逐渐减小;将开缝的数量取为5片能得到最好的综合性能;在相对开缝高度为0.3～0.7时,翅片侧Nu和f因子随着相对开缝高度的增加而增大,但当相对开缝高度在0.5～0.7范围内,翅片侧Nu的增幅减小;将相对开缝高度取为0.5能得到最好的综合性能。     

A multilevel sampled‐data approach for resilient navigation and control of autonomous systems

Autonomous systems are rapidly becoming an integrated part of the modern life. Safe and secure navigation and control of these systems present significant challenges in the presence of uncertainties, physical failures, and cyber attacks. In this paper, we formulate a navigation and control problem for autonomous systems using a multilevel control structure, in which the high‐level reference commands are limited by a saturation function, whereas the low‐level controller tracks the reference by compensating for disturbances and uncertainties. For this purpose, we consider a class of nested, uncertain, multiple‐input–multiple‐output systems subject to reference command saturation, possibly with nonminimum phase zeros. A multirate output‐feedback adaptive controller is developed as the low‐level controller. The sampled‐data (SD) design of this controller facilitates the direct implementation on digital computers, where the input/output signals are available at discrete time instances with different sampling rates. In addition, stealthy zero‐dynamics attacks become detectable by considering a multirate SD formulation. Robust stability and performance of the overall closed‐loop system with command saturation and multirate adaptive control are analyzed. Simulation scenarios for navigation and control of a fixed‐wing drone under failures/attacks are provided to validate the theoretical findings.