煤矿水仓清理新工艺

通过调研现场情况以及检测煤泥特性，探寻一种实用性强、方法简单的新工艺来替代劳累的人工和繁琐的机械清淤，解决现实问题。针对实际情况开发清仓新工艺，介绍了该工艺的技术路线选择、设计依据以及实际应用效果。该新工艺具有降低清仓时间、减轻工人劳动强度、设备操作简单、实用性强等特点。     

高分子材料导热性能影响因素研究进展

介绍了高分子材料导热性能影响因素研究进展，重点阐释了聚合物基体的结构特性（链结构、分子间相互作用、取向、结晶度等）、导热填料（种类、含量、形态、尺寸等）以及制备方法等对高分子材料导热性能的影响。     

Preparation of faceted TaN grains by heating Ta-containing oxides in BN crucible with Na

Single-crystal grains of TaN were synthesized by heating Ta₂O₅, FeTa₂O₆, or FeTaO₄ in a BN crucible together with Na metal in an Ar atmosphere at 1100 °C. The BN crucible acted a solid source of nitrogen. Aggregates of columnar ε-TaN single crystals 10–150 μm in size were formed on the inner wall of the BN crucible when either Ta₂O₅ or FeTa₂O₆ was used. On the other hand, platelet-like single crystals of θ-TaN 1–50 μm in size were obtained from FeTaO₄. The results of wavelength-dispersive X-ray spectrometry indicated that the compositions of the ε-TaN and θ-TaN crystals were close to the stoichiometric ideal.     

矿用直线振动筛结构故障分析

针对煤矿选煤厂直线振动筛工作过程中出现的结构故障问题,采用有限元仿真与现场测试结合的方法对振动筛出现故障的原因进行了分析研究。介绍了振动筛的主要结构及常见故障,并以某矿选煤厂发生大梁断裂的振动筛为例,对该振动筛进行三维建模和有限元模态分析,分析结果表明:随着模态阶次的增加,振型的变化逐渐由移动转为结构本身的扭曲变形。在该振动筛空载工作状态下,选用本质安全型便携式测振记录仪进行振动测试并处理测试信号,得到该振动筛的工作频率。结合模态分析结果和实际测试结果,判断出空载时频繁运行振动筛是造成其大梁断裂的主要原因。根据故障原因给出维护建议:应当尽量避免振动筛在空载或物料较少的状态下长时间运行;在振动筛投入使用前,应预先了解振动筛的工作状态及可能存在的薄弱环节,尽可能避免结构故障,保证振动筛可靠运行。     

柠檬酸铋合成新工艺研究

针对现有柠檬酸铋制备工艺合成时间长、能耗高、产品纯度不高等不足,介绍了一种常温下制备柠檬酸铋的新工艺。新工艺制备时间短,制备的柠檬酸铋产品质量好,合成过程产生的废水可循环利用,废气经碱液循环吸收可生产硝酸钠副产品。     

基于Bootstrap方法的密封寿命可靠性评估

针对高可靠、长寿命密封件在小样本试验下的可靠性寿命评估需求,提出一种基于虚拟增广样本和Bootstrap方法的密封寿命小样本数据可靠性评估方法。并以轴用阶梯圈为例,进行寿命可靠性评估。首先通过虚拟增广法将轴用阶梯圈台架寿命试验数据样本数增广至10个,使得样本数满足Bootstrap方法的适用条件;然后再利用Bootstrap方法得到轴用阶梯圈的寿命可靠性评估结果。     

Kilogram-scale production of highly active chalcogenide photocatalyst for solar hydrogen generation

Solar photocatalytic hydrogen production from water has been regarded as an ideal way addressing world energy and environmental crises. The technology has long relied on the development of an efficient photocatalyst. In addition to its photocatalytic performance, the large-scale production of certain photocatalyst from the viewpoint of particle application remains a challenge yet has received insufficient focus. Herein, we report an efficient and practical batch preparation system based upon hydrothermal method to the scalable production of chalcogenide nanoparticle photocatalyst. Taking the synthesis of Cd_0.5Zn_0.5S (CZS) twinned photocatalyst as an example, the outcome of CZS photocatalyst could reach ～0.8 kg in this batched synthesis, which is about 390 times of the lab-scale production in mass amount. It was found that the twinned structure and visible-light absorption property were well maintained. Although further measurements toward the photocatalytic activity indicate slight decrement on solar H₂ generation compared to the lab-scale synthesized CZS photocatalyst, a high quantum efficiency of about 40.5% at 425 nm remained. The photocatalytic reaction could also stably proceed for 200 h without notable decay of H₂-evolution rate. This work thus provides a powerful means for facile scaling up the chalcogenide nanoparticle photocatalyst at the kilogram level with both high quality and good reproducibility.     

阳泉矿区煤样不同应力状态下声发射特性分析

为探索原煤煤样的力学性能和不同应力状态下的声发射活动特性,对阳泉矿区新景矿、平舒矿主采煤层的煤样进行了单轴、三轴压缩和巴西劈裂的声发射试验,分析了2种煤样力学性能及不同加载过程的声发射活动规律。证明通过监测声发射(微震)活动分析煤样或煤岩体内部破坏状态是一种方便有效的手段。     

Test sample allocation method for testability verification test

An extended failure mode effect and criticality analysis (FMECA)-based sample allocation method for testability verification is presented in this study to deal with the poor representativeness of test sample sets and the randomness of the testability evaluation results caused by unreasonable selection of failure samples. First, the fault propagation intensity is introduced as part of the extended information of FMECA, and the sample allocation impact factors of component units and failure modes are determined under this framework. Then, the failure mode similarity and impact factor support are defined, and the game decision method for weighing the relationship between similarity and support is proposed to obtain the weight of failure mode impact factor. Finally, a two-step allocation framework of test samples is formulated to realize the sample allocation of component units and failure modes. This method is applied to the testability verification test of a launch control system. Results show that this method can obtain more representative test samples compared with the traditional sample allocation method while effectively reducing randomness of single testability evaluation result.