Influence of fluorine-containing side chain on the properties of waterborne polyurethane-urea

In order to prepare waterborne polyurethane with excellent water resistance and thermodynamic properties, a series of side chain fluorinated waterborne polyurethane-urea (FWPU-UA) was synthesized with polytetramethylene ether glycol, N-(2-methyl-1,3-propanediol-2′-)-perfluoro-1-butanesulfonyl amine (NPBA), isophorone diisocyanate, and isophoronediamine. With the increase of NPBA content, the weight loss temperature, glass transition temperature, and tensile strength of FWPU-UA were all improved. Gaussian fitting analysis of infrared data and density functional theory simulation proved that the introduction of fluorine side chains increased the interaction of hydrogen bonding in the FWPU-UA. X-ray photoelectron spectroscopy analysis indicated that the aggregation of fluorine atoms on the surface of film were caused by the migration and enrichment of fluorine side chains. Furthermore, the water resistance of polyurethane-urea film could be significantly improved by adding a small amount of NPBA, and the seven-day water absorption rate of polyurethane-urea film was reduced from 30.13% to 12.55%.     

Magnetically Guidable Proteinaceous Adhesive Microbots for Targeted Locoregional Therapeutics Delivery in the Highly Dynamic Environment of the Esophagus

The esophagus is a tubular-shaped muscular organ where swallowed fluids and muscular contractions constitute a highly dynamic environment. The turbulent, coordinated processes that occur through the oropharyngeal conduit can often compromise targeted administration of therapeutic drugs to a lesion, significantly reducing therapeutic efficacy. Here, magnetically guidable drug vehicles capable of strongly adhering to target sites using a bioengineered mussel adhesive protein (MAP) to achieve localized delivery of therapeutic drugs against the hydrodynamic physiological conditions are proposed. A suite of highly uniform microparticles embedded with iron oxide (IO) nanoparticles (MAP@IO MPs) is microfluidically fabricated using the genipin-mediated covalent cross-linking of bioengineered MAP. The MAP@IO MPs are successfully targeted to a specific region and prolongedly retained in the tubular-structured passageway. In particular, orally administered MAP@IO MPs are effectively captured in the esophagus in vivo in a magnetically guidable manner. Moreover, doxorubicin (DOX)-loaded MAP@IO MPs exhibit a sustainable DOX release profile, effective anticancer therapeutic activity, and excellent biocompatibility. Thus, the magnetically guidable locomotion and robust underwater adhesive properties of the proteinaceous soft microbots can provide an intelligent modular approach for targeted locoregional therapeutics delivery to a specific lesion site in dynamic fluid-associated tubular organs such as the esophagus.     

Improved one-dimensional beam model for unbalanced composite single-lap joint

An analytical nonlinear solution was provided for unbalanced composite single-lap joint (CSLJ) using an improved one-dimensional beam model, which incorporated the effect of bending–tension coupling. The bending–tension coupling stiffness was introduced to characterize the coupling bending and tension behavior induced by the un-symmetric stacking sequence of composite laminates. The governing differential equations captured the bending–tension coupling behavior and the geometrically nonlinear features were constructed based on the displacement compatibility conditions of flexible interface. The transverse deformation in overlap region, edge moment factors and adhesive stress distributions for the unbalanced CSLJ with inflexible, intermediate flexibility and flexible adhesive can be determined by the present one-dimensional beam model. The accuracy of the present model was validated by the comparison with nonlinear finite element model. The effect of bending–tension coupling on edge moment factors and peak values of adhesive stresses was shed light on with the present model.     

氨基磺酸盐型水性醋酸纤维乳液的制备与性能

采用乙二胺基乙磺酸钠(AAS)作为亲水剂,在二月桂酸二丁基锡(DBTDL)的催化下,通过异佛尔酮二异氰酸酯(IPDI)将亲水基引入二醋酸纤维(CA)分子中,制得了一种氨基磺酸盐型水性醋酸纤维乳液(SWCA)。利用FTIR、DLS、黏度计、TEM、SEM、接触角测量仪、XRD、TGA,对SWCA结构及涂膜性能进行表征。考察了IPDI与AAS物质的量比对SWCA乳液粒径、黏度、涂膜表观形貌及耐水性的影响。结果表明:当n(IPDI)∶n(AAS)=1.1∶1时,乳液最稳定,微观形态呈水包油型(O/W)核壳结构,乳液粒径和分散系数(PDI)最小,分别为128nm和0.112,此时乳液表观黏度最大,为73.5m Pa·s,所成涂膜致密平整,接触角可达110.2°±2°,表现出明显的疏水性;此外,与二醋酸纤维相比,SWCA涂膜结晶性减弱,呈微晶态或次晶态结构,且具有较好的耐热性。     

Effects of typical soybean meal type on the properties of soybean-based adhesive

In order to effectively apply soybean meal for the preparation of water-resistant soybean-based adhesives for plywood, the effects of three typical soybean meal products, namely, low-temperature soybean meal (LM), high-temperature soybean meal (HM), and physical soybean meal (PM), on the properties of soybean-based adhesive were investigated. The results indicated that the number of reactive groups in the three soybean meals followed the order LM > HM > PM, which in turn led to various crosslinking densities when these soybean meals were crosslinked by epichlorohydrin-modified polyamide (EMPA) during the curing process. The LM soybean adhesive had 6.6% higher soaking bond strength and 16.5% higher boiling-dry-boiling bond strength than the HM soybean adhesive, and 19% higher soaking bond strength and 33% higher boiling-dry-boiling bond strength than the PM soybean adhesive, respectively. These three soybean meals could be used to prepare soybean adhesives for interior-use plywood because all plywood panels bonded with their adhesives passed a water-soaking test at 63 °C for 3 h, but only the LM soybean adhesive achieved the desired water resistance for floor-base plywood. Among the three evaluated soybean meals, LM was the most promising raw material for the preparation of soybean-based adhesive because of a greater number of reactive groups, higher crosslinking density, and superior bond strength. Plywood panel bonded with HM soybean adhesive had a water resistance lower than, but very close to, the standard required value (>0.8 MPa) for floor-base plywood.     

Grafting of sulfamethoxazole on acrylic acid−vinyl methyl ketone copolymer using the schiff base reaction−application as a drug delivery system

A series of poly(acrylic acid-co-methylvinylketone–graft–sulfamethoxazole)(AVMDS) species was synthesized for drug carrier applications. The synthesis involved two steps: copolymerization of acrylic acid(AA) with methyl vinyl ketone(MVK) through the free radical route and subsequent grafting of the sulfamethoxazole (SMX) onto the copolymer via the Schiff base reaction of the primary amine of SMX with the carbonyl groups of the MVK units. The structures and properties of the materials were characterized by nuclear magnetic resonance(NMR), X-ray diffraction(XRD), differential scanning calorimetry(DSC), and scanning electronic microscopy (SEM). An in-vitro cytotoxicity test of the drug-carrier systems via MTT assay revealed no significant cytotoxic effect at concentrations up to 100?µg?·?ml^?1. The dynamic release of SMX from these systems through a retro-imidation reaction (inverse Schiff base reaction) was investigated in depth, where the diffusion through the polymer matrix, the enhancement of the water solubility of SMX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamics were evaluated. The AVMGS4 and AVMGS1 drug carrier systems containing 3.58 and 1.18?wt% of SMX were the best performing systems.     

汽车同步器齿环用耐高温结构胶膜的性能研究

同步器齿环与碳纤维耐摩擦材料是通过胶粘剂实现粘接,而胶粘剂耐高温性能的优劣则是决定其使用寿命的决定性因素。本文研究了环氧树脂E-51体系、环氧树脂AG80体系以及基材表面处理工艺对于结构胶膜耐高温性能的影响,采用熔融共混法制备了胶粘剂并以玻璃纤维布为背衬制备了耐高温结构胶膜。采用高低温拉力机对不同体系制备的结构胶膜进行了常温、200℃高温的钢材搭接剪切强度的测试。结果表明,对于E-51体系,提高体系交联密度可显著增大常温剪切强度,但高温剪切强度明显下降;对于四官能度的AG80体系,AG80的用量是影响其高温性能的主要因素,同时基材表面喷砂水洗处理后可显著增大结构胶膜与基材粘接有效面积,进而显著改善高温性能。所制备的结构胶膜较常用胶粘剂使用更加便捷,耐高温性能优良,满足同步器齿环使用要求。     

非常规蛋白基木材胶黏剂研究现状及发展前景

介绍了动物和植物型非常规蛋白资源的种类及其制备蛋白基木材胶黏剂的研究现状和存在的问题,展望了非常规蛋白胶黏剂的发展前景。