Facile fabrication of MOF-decorated nickel iron foam for highly efficient oxygen evolution

Metal-organic frameworks (MOFs) have emerged as efficient electrocatalysts due to the features of high specific surface area, rich pore structure and diversified composition. It is still challenging to synthesize self-supporting MOF-based catalysts using simple and low-cost fabrication methods. Herein, we successfully fabricated Ni-doped MIL-53(Fe) supported on nickel-iron foam (Ni-MIL-53(Fe)/NFF) as efficient electrocatalyst. A facile two-step solvothermal method without adding any metal salts was used, which can simplify the fabrication process and reduce the experimental cost. In the fabrication process, the bimetallic Ni-MIL-53(Fe)/NFF was in situ converted from an intermediate NiFe₂O₄/NFF. The obtained material exhibits outstanding electrocatalytic oxygen evolution performance with a low overpotential of 248 mV at 50 mA cm^?2, and a small Tafel slope of 46.4 mV dec^?1. This work sheds light on the simple and efficient preparation of bimetallic MOF-based material, which is promising in electrocatalysts.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

红土镍矿冶金技术研究进展

如今世界经济迅猛发展,金属镍的需求量也在加速增长。人们主要从硫化镍矿和红土镍矿中提炼金属镍。然而硫化镍矿资源因大规模开发而不断减少,红土镍矿未来将成为镍的主要来源。因此研究红土镍矿的高效开发利用,是当今围绕镍资源研究的热点,对实际生产具有重要的现实意义。本文简要介绍了镍的应用、开发红土镍矿的意义、红土镍矿的矿物学特性、红土镍矿世界范围内的储量和分布,并且列举并分析了红土镍矿的各种冶炼工艺及其优点与不足,同时综述了有关红土镍矿研究的新方法,为红土镍矿高附加值综合利用研究提出思路。     

单组份聚氨酯炮孔填塞剂应用性试验

炮孔填塞是爆破施工过程中的一个关键环节,也是践行精细爆破设计理论的重要措施。传统的炮泥填塞存在着诸多不足,为此,研制了以聚氨酯为基材的TK炮孔填塞剂,通过大量基础性能研究和隧道现场工业性试验,论证了其作为炮孔填塞材料可降低炸药单耗,提高单循环进尺和炮孔利用率,减小空气冲击波、爆破噪声等有害效应的影响,且是安全可靠的。TK炮孔填塞剂优良的填塞效果、方便快捷的施工方法及显著的经济效益,方便于在爆破工程中推广应用。     

Adsorption performance of mesoporous silicas towards a cationic dye. Influence of mesostructure on adsorption capacity

The dye adsorption performance of four mesoporous silicas with different structure and textural properties, MCM-41, MCM-48, SBA-15 and mesocellular silica foam (MCF), was studied and compared by using toluidine blue O (TBO) as dye model in aqueous solution. These materials were characterized by X-ray diffraction (XRD), small-angle X-ray scattering, nitrogen adsorption-desorption analyses, and transmission electron microscopy (TEM). The effect of some parameters such as adsorbent dosage, contact time, temperature, and pH on the TBO removal in aqueous solution was studied. Results showed that adsorption capacity raised when adsorbent dosage, contact time and pH solution were increased while an increase in temperature decreased the adsorption of TBO. Langmuir, Freundlich and Temkin isotherm models were employed to elucidate the adsorption mechanism while the adsorption rate data were analyzed according to the pseudo-first and second-order kinetic models. Results showed that adsorption of TBO onto MCM-48, SBA-15, and MCF fitted well the Freundlich isotherm model while the kinetic studies showed that adsorption process could be better described by the pseudo-second-order model for all mesoporous silicas. Finally, some solvents were evaluated to carried out dye desorption from the TBO-loaded mesoporous silicas founding that acetic acid was the most efficient.     

十二烷基硫酸钠修饰NiFe2O4对亚甲基蓝的类芬顿催化氧化性能

采用化学沉淀法制备了十二烷基硫酸钠（SDS）改性的纳米酸镍（记为NiFe₂O₄-S），利用X射线衍射（XRD）、红外光谱（FTIR）、能谱（EDS）、透射电镜（TEM）、BET比表面等技术手段对样品进行了表征。采用多相芬顿氧化技术，以亚甲基蓝溶液为模拟污染物废水，研究了SDS对铁酸镍的改性效果、亚甲基蓝溶液初始pH以及催化剂循环使用等不同条件因素对样品类芬顿催化活性的影响。结果显示，经SDS改性后的NiFe₂O₄-S比纯相NiFe₂O₄表现出了更优异的催化性能，NiFe₂O₄-S对酸性（pH=3.5）、近中性（pH=6.5）和碱性（pH=9.5）的亚甲基蓝溶液均有着较好的催化降解效果；NiFe₂O₄-S具有良好的催化稳定性和重复使用性。对该催化反应体系的作用机理进行了详细探讨，NiFe₂O₄-S表现出优异的类芬顿催化活性归因于更强的电子转移能力，吸附的SDS能促进H₂O₂和 \text{?} {\mathrm{O}}_{\mathrm{2}}^{\text{-}} 分别与表面Fe³⁺反应将其还原转化为Fe²⁺。·OH是直接分解亚甲基蓝的活性物种，反应中NiFe₂O₄-S表面较高浓度的Fe²⁺可以有效地把H₂O₂分解为·OH。SDS增强了催化剂表面对亚甲基蓝的吸附能力，促进了·OH与亚甲基蓝的分解反应。     

A Green Method to Fabricate Polyethyleneimine-Alginate Multilayer Coatings Modified Polyurethane Foam for Cu2+ Adsorption from Aqueous Solution

In this study, flexible polyurethane foam (FPUF) was modified with bio-based coatings composed of polyethylenimine (PEI) and alginate (ALG), fabricated by layer-by-layer (LbL) self-assembly. LbL self-assembled coatings modified FPUFs were studied for their potentials for removing Cu²⁺ ions from aqueous solutions by using batch adsorption technique, as a function of assembled bilayers number, pH value, carrier amount and adsorption time. The maximum adsorption capacity of the modified FPUF was shown to be 54 mg/g for Cu²⁺. Results suggested that the LbL self-assembly could potentially be a promising cost-effective technique for fabricating advanced adsorbent materials for removing pollutants from wastewater.     

Cellular morphology evolution of chain extended poly(butylene succinate)/organic montmorillonite nanocomposite foam

Polymer foam with complex cellular structure (CCS) possessing both large cell and small cell simultaneously has lower density as well as better mechanical and thermal properties than those with mono-porous cell structure, which could be applied in the fields of packaging and construction materials. In this article, organic montmorillonite (OMMT) was introduced into chain-extended poly(butylene succinate) (CPBS) through melt blending method. CCS in the resultant CPBS samples were generated in a stainless steel autoclave using supercritical CO₂ as physical blowing agent by a cooling and two-step depressurization method. The crystallization temperature and crystallinity of CPBS increased by 4 °C and 2% respectively, due to the introduction of OMMT. Exfoliated structure of OMMT and some fish scale-like OMMT were observed in the CPBS/OMMT nanocomposites. The optimum range of the first depressurization between 1 and 7 MPa for fabricating the CCS in the CPBS foams with different contents of OMMT was obtained. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47107