基于纸喷雾离子化衍生质谱法快速检测PM2.5中的醌污染物

醌类化合物是PM2.5中的一类有害物质。本研究建立了纸喷雾离子化衍生质谱法快速测定PM2.5中的醌类污染物。通过衍生化反应在醌化合物中引入氨基，提高醌在纸喷雾中的离子化效率。随后对衍生化试剂种类、电压、喷雾溶剂种类等反应条件进行优化。在最优实验条件下，采用内标法定量分析1,4-苯醌、甲基对苯醌、1,4-萘醌和1,4-蒽醌，4种化合物均呈现较好的线性关系，其检出限分别为4.49、20.89、0.13、0.17 ng。利用该方法分析PM2.5实际样品中的萘醌和蒽醌，均获得了较好的定性和定量结果。     

Detailed analysis on thermal,microstructural, mechanical,and morphological features of side chain liquid crystalline polymer/isotactic polypropylene graft copolymers: Effect of grafted and ungrafted polymer units

The main scope of this comprehensive study is to investigate the effects of poly(p-benzophenoneoxycarbonylphenyl acrylate), poly(BPOCPA), which presenting as only graft units or both graft and ungrafted units in the matrix, on the fundamental features of isotactic polypropylene (IPP). The graft copolymerization of BPOCPA onto IPP was performed with the aid of bulk melt polymerization at varying monomer content levels ranging from 5% to 40%. The thermal behavior, crystal quality, mechanical performance, and surface morphology of the samples were investigated by means of differential scanning calorimeter, X-ray diffractometer (XRD), universal mechanical test, and scanning electron microscope (SEM) techniques. Thermal analyses depicted that there existed the noteworthy enhancements in both crystalline melting temperatures and percent crystallinities of matrix polymers. Furthermore, according to XRD results, a and b parameters increased significantly at low percentages of the graft units, while the parameter c decreased in all products in consistence with the content. As for the mechanical characterization, the grafting led to remarkable improvements in modulus, tensile and impact strength of the products. SEM micrographs indicated that the samples were completely homogeneous without any phase separation and the products exhibited brittle nature with some ductility.     

Research on the formation mechanism of big data technology cooperation networks: empirical evidence from China

Scientometrics - The purpose of the present paper is to investigate the formation mechanism of big data technology cooperation networks by considering the combined effect of three key factors,...     

A two-step shapelets based framework for interactional activities recognition

Multimedia Tools and Applications - Human-human interactions recognition has high potential to have a big impact on enabling robots being able to interact with people. Recently, body sensor...     

印刷电路板缺陷检测的实际应用

电路板在我们的日常生活中非常常见,这就使得印刷电路板的缺陷检测显得尤为重要。AOI作为新兴的检测PCB板缺陷的系统,在生产实际中正在被大家熟知并且应用。相较于传统的检测方式,AOI系统比较灵活,无论是在检测时间还是系统运算上,或者是对相关技术人员的要求相较于传统方式都比较有优势,本文就AOI系统在实际中的应用展开讨论,分析并且介绍了在实际应用中的具体细则。     

一种大型球铁飞轮冒口工艺改进

铸造车间生产的N330飞轮在加工Ф1025处M20螺栓孔时会出现一处或多处缩松缺陷,造成了该品种废品率的增加,为解决此缩松问题对飞轮进行了跟踪研究,分析并改进了飞轮的造型、冒口补缩和浇注工艺,通过试制验证了工艺改进的合理性。     

Combined effect of ozone and ultrasound on disruption of microalgal cells

Among several disruption methods tested so far, ozonation and sonication were distinguished from others by their effective cell rupturing ability. In this study, these disruption methods were combined to enhance the retrieval of biofuel feedstock (carbohydrates and lipids) from microalgae. A mixed microalgal culture was subjected to first ozonation, followed by sonication. Compared to the extraction of 22% of total lipids and 47% of total carbohydrates by sole ozonation, the retrieval of algal metabolites reached 59% and 81% of total lipids and carbohydrates, respectively. The optimum process variables were found by means of a response surface modeling and quadratic programming.     

乙醇催化转化到丁醇研究进展

乙醇的规模化生产和其在汽油中有限的添加量推动了乙醇的高值化利用。由于丁醇具有独特的物化性能，将乙醇一步催化转化为丁醇受到人们的普遍关注。本文主要综述了乙醇催化转化到丁醇的最新研究进展，阐述了不同均相催化剂、羟基磷灰石、氧化物和金属促进氧化物催化剂对乙醇转化率和丁醇选择性的影响，探讨了典型催化剂上乙醇催化转化到丁醇中的双分子机理和Guerbet机理，总结了乙醇催化转化到丁醇中存在的问题、机遇和挑战。提出未来乙醇催化转化的研究重点应该放在高乙醇转化率下丁醇的选择性控制上，即利用均相催化剂研究策略，借助近原位条件下反应机理研究的结果，设计合成新型催化剂体系，实现乙醇到丁醇的高效转化。