微纳层叠聚丙烯腈凝胶流动特性的数值模拟研究

建立了层叠流道的三维模型和有限元网格模型，根据流变测试数据，采用Polymat对物料的黏度模型参数进行拟合，并利用Polyflow软件对聚丙烯腈（PAN）凝胶在层叠流道内的三维等温流动过程进行了数值模拟分析。研究发现，当入口流量增大时，层叠流道出口速度的不均匀性增加；沿流动方向流道内压力逐渐降低，并在出口处降低至同一最低值；流道进出口压力差与入口流量大小具有正相关性；在流道的中心截面上剪切速率分布均匀，波动较小。     

火电机组一次调频性能实时监测系统

为了实时监测和评价火电机组一次调频性能，开发了火电机组一次调频性能实测监测系统。该系统具有一次调频参数异动感知、一次调频性能量化预测及自适应校正等关键功能。某机组的实际应用表明，该系统能够实现火电机组一次调频关键参数的实时监测和调频性能的准确预测。     

Double emulsion (W/O/W) gel stabilised by polyglycerol polyricinoleate and calcium caseinate as mangiferin carrier: insights on formulation and stability properties

Mangiferin (MGF) is a phenolic compound isolated from mango, but its poor solubility significantly limits its use. In this study, MGF was embedded into the inner aqueous phase of W₁/O/W₂ emulsions. Firstly, the dissolution method of MGF was determined. MGF remained stable in solution with pH 13 at 30 min, and its solubility reached 10 mg mL⁻¹. When the pH of MGF solutions was adjusted from pH 13 to pH 6, MGF did not immediately crystallise, providing sufficient time to construct the MGF-loaded W₁/O/W₂ emulsions. Subsequently, the MGF-loaded W₁/O/W₂ emulsions were constructed using polyglycerol polyricinoleate (PGPR) and calcium caseinate (CAS). The formation and stability of the W₁/O/W₂ emulsions were investigated. The MGF-loaded W₁/O/W₂ emulsions stabilised with 1% PGPR and 1% – 3% CAS exhibited a low viscosity, limited loading capacity, and poor stability. Conversely, the MGF-loaded W₁/O/W₂ emulsions stabilised by 3%PGPR–3%CAS exhibited optimal loading capacity (encapsulation efficiency = 95.31% and loading efficiency = 0.91%) and stability, which was attributed to the fact that high viscosity and gel state retarded the migration of inner aqueous phase. These results indicated that the W₁/O/W₂ emulsions stabilised by PGPR and CAS may be a potential alternative for encapsulating mangiferin.     

基于形态特征提取的急性下壁心肌梗死BiLSTM网络辅助诊断算法

急性下壁心肌梗死是一种病发急、进展快、致死率高的心脏疾病,该文提出一种新颖的基于形态特征提取的BiLSTM神经网络分类的急性下壁心肌梗死辅助诊断算法,可大幅度提高医生对急性下壁心肌梗死疾病的诊断效率并有助于及时确诊.算法包括:对胸痛中心数据库心拍信号进行降噪及心拍分割;根据临床心内科医学诊断指南提取了12导联波形距离特征和分导联波形幅值特征;依据提取的特征搭建LSTM与BiLSTM神经网络进行心拍的分类识别;使用PTB公开数据库和胸痛中心数据库多临床中心进行交叉验证.实验结果表明,加入胸痛中心真实临床数据后,基于形态特征提取BiLSTM神经网络的急性下壁心肌梗死辅助诊断算法准确率达到99.72％,精度达到99.53％,灵敏度达到100.00％,同时F1-Score达到99.76.该算法比其他现有算法准确率提高至少1％,该项研究具有非常重要的临床应用价值.     

Location Privacy in Device-Dependent Location-Based Services: Challenges and Solution

With the evolution of location-based services (LBS), a new type of LBS has already gain a lot of attention and implementation, we name this kind of LBS as the Device-Dependent LBS (DLBS). In DLBS, the service provider (SP) will not only send the information according to the user’s location, more significant, he also provides a service device which will be carried by the user. DLBS has been successfully practised in some of the large cities around the world, for example, the shared bicycle in Beijing and London. In this paper, we, for the first time, blow the whistle of the new location privacy challenges caused by DLBS, since the service device is enabled to perform the localization without the permission of the user. To conquer these threats, we design a service architecture along with a credit system between DLBS provider and the user. The credit system tie together the DLBS device usability with the curious behaviour upon user’s location privacy, DLBS provider has to sacrifice their revenue in order to gain extra location information of their device. We make the simulation of our proposed scheme and the result convince its effectiveness.     

1-甲基环丙烯结合不同保鲜袋对叶用甘薯茎尖冷藏保鲜效果的影响

目的探究1-甲基环丙烯(1-methylcyclopropylene,1-MCP)结合不同保鲜袋对叶用甘薯茎尖贮藏品质的影响,筛选最适的保鲜方式。方法以叶用甘薯茎尖为材料,经0.91μL/L1-MCP处理24h后结合聚乙烯(PE)或微孔膜(WK)保鲜袋包装,在5℃下进行贮藏,分别于0、3、6、9、12 d时对其失重率、色差、黄化率、呼吸强度、乙烯释放量、多酚氧化酶活性等指标进行测定。结果贮藏12 d后, 1-MCP+PE, 1-MCP+WK处理组的失重率分别为3.43%,2.72%,显著低于未经1-MCP处理组(P0.05),说明1-MCP处理能够有效抑制叶用甘薯茎尖失水; 1-MCP+WK处理下的L值为33.9,高于其余3种处理,表明该处理能够更好的保持叶用甘薯茎尖的亮度和新鲜感。此外,1-MCP结合保鲜袋处理能够减弱呼吸作用,降低乙烯释放量及多酚氧化酶活性。结论1-MCP处理并结合PE膜或者微孔膜包装对叶用甘薯茎尖具有良好的保鲜效果,可以有效延长其贮藏期。     

QKD系统中基于EA电路的诱骗态实现

使用诱骗态量子秘钥方案可以解决因光子数分离攻击而导致的安全漏洞,保证了长距离量子通信的安全。本文介绍了量子通信的相关原理,通过对电吸收调制电路和激光器驱动电路的设计,精确控制产生了1550 nm波段的窄脉冲,经过内部调制成功制备诱骗态光脉冲,其强度约为信号态光脉冲的三分之一,因激光器的同一性而具有一致的光学特征从而避免了时频窃听,并具有强度可调的优点。     

热仿真技术在加固显示器热设计中的应用

根据某型加固显示器的应用环境及内部功能模块的热特性,选择强迫风冷的散热方式,并通过热仿真计算指导风扇选型,根据仿真结果验证散热方案的可行性。最终,依据试验结果验证仿真结果的准确性,为加固显示器的热设计提供思路。     

Effects of hydrogen content on powder metallurgy characteristic of titanium hydrides

The titanium dihydride (TiH₂) powder metallurgy has been attracted a lot of attention, but TiH₂ powder is difficult to press moulding. In this paper, the titanium hydride powder metallurgy including TiH₂ and unsaturated titanium hydrides (TiH_1.5) was investigated simultaneously compared with pure titanium metal powder metallurgy. The results indicates that the titanium hydride powder metallurgy is accompanied by the deoxidation self-purification effect during dehydrogenation process for both of TiH₂ and TiH_1.5, which have higher sintering density than pure titanium. There are the three stages relative to densification rate, namely the slow, rapid and full densification stages for all of three materials. The compressive yield strengths increase rapidly in the rapid densification stage and are unchangeable almost in the full densification stage after holding 2 h at 1300 °C. The titanium hydride powder metallurgy is helpful to obtain much better mechanical properties than the pure titanium metal powder metallurgy. Here the compressive yield strength of the as-sintered TiH₂ compact with the maximum hydrogen content is the best but has very small difference compared with that of the as-sintered TiH_1.5 compact after full sintering densification.     

稻壳粉燃烧过程中颗粒尺寸和形态的演变

以颗粒尺寸为250 ~ 300 μm的稻壳粉为研究对象,通过高温沉降炉中的热解和燃烧实验结合颗粒样品的扫描电子显微镜图像分析方法,研究了稻壳粉燃烧过程中颗粒尺寸和形态的变化及热解、燃烧条件的影响。结果表明,热解时颗粒宽度等尺寸参数均缩小,温度的影响较小;焦燃烧时颗粒尺寸因破碎明显减小,温度、气氛等燃烧条件通过影响破碎进而影响尺寸变化。对于形态参数,热解和燃烧后横纵比的变化及实验条件对其变化的影响与尺寸参数相似;热解和燃烧后圆形度几乎无变化;圆度在热解后变化也较小,而燃烧后明显减小;实验条件对圆形度、圆度的变化几乎无影响。