仙游抽水蓄能电站尾水系统充排水试验

为检查工程质量,查找输水系统可能存在的问题并消除隐患,保障电站安全运行,福建仙游抽水蓄能电站在投产发电前,要对输水发电系统进行充水试验与放空排水试验,在试验过程中监测输水系统的应力、应变与渗漏水情况。本文以尾水系统为例,介绍了试验所应具备的工程条件、工作程序及技术要求、试验成果分析和存在问题处理等。试验表明,仙游抽水蓄能电站尾水系统设计合理,施工质量优良,结构可靠,可供同类工程参考与借鉴。     

HMZZX环保型无人值守煤炭联合制样系统研发

根据我国煤炭样品制备技术现状和国内外发展趋势,研究开发了自动化控制无人值守煤炭联合制样系统,并从系统制样程序设计、系统整体结构设计、各单元模块设计、系统性能试验等方面对该系统的主要功能及软硬件结构进行介绍,并从称重单元、输送单元、破碎单元、缩分单元、干燥单元、粉碎单元、样品接收包装单元、除尘清洗单元等重点阐述了各单元模块设计,可实现煤样制备全过程无人化、信息化及样品的安全可追溯,其性能试验符合国标GB 474—2008中的相应要求。     

Advanced exergy analysis of an absorption cooling machine: Effects of the difference between the condensation and absorption temperatures

The water–LiBr absorption machine was analyzed with the purpose of identifying the endogenous, exogenous, avoidable and unavoidable fractions of the exergy destruction. The latter was observed to be largely of endogenous nature, with the desorber and absorber being the major contributors. When the difference between the absorption and condensation temperatures was raised, both the first and second law efficiencies degraded. Furthermore, the absorber endogenous avoidable irreversibility was much larger than that at the desorber when the absorption temperature was lower than the condensation temperature, and the situation reversed when the absorption temperature became higher than the condensation temperature. The same trends were observed in terms of the exogenous avoidable exergy destruction. However, the endogenous unavoidable exergy destruction at the absorber was initially smaller than that at the desorber, and the two components equally contributed to the total endogenous unavoidable irreversibility when the absorption temperature became higher than the condensation temperature.     

Effects of Cooling Rate and Component on the Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y(wt%) alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing(SDAS) of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates(Rc) from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0:45:45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction(Vf) of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.     

某面板堆石坝沉降观测资料反馈分析

根据某面板堆石坝施工期、蓄水初期以及几年来的沉降观测资料，对坝体填筑材料计算参数进行反馈分析，得出了能够反映坝体实际变形的弹塑性应力变形计算参数，有利于今后建立大坝变形预报模型，更准确地把握大坝实时运行状态。     

High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

龙潭水电站励磁装置可控硅易损原因及改进措施

通过龙潭水电站对励磁装置可控硅元件实施过电压保护改进前后实际效果的分析,介绍了一种有效的过压保护方式.     

RSView32软件平台的应用及扩展

概述了RSView32工控软件的特点和使用方法 ,并通过贵溪冶炼厂的一个液位自动控制系统的人机界面设计说明了如何在控制系统中使用RSView32软件。文章特别介绍了如何用VBA程序设计来扩展其功能     

循环水冷却塔风机软启动器应用及分析

本文分析了冷启动却塔风机直接启动方式对风机造成的一些危害。并对冷却循环水风机软启动器改造前、后作了比较 ,重点说明了如何利用软启动器在原冷却塔风机电机上实现限流启动以及改造后在实践过程中存在的一些问题 ,提出了改进措施。     

一种发出红色荧光的六核配合物[Cu6（pymt）6]

合成了一价铜和2-巯基嘧啶盐的配合物[Cu6（pymt）6]并进行结构分析，该配合物能发出强的红色荧光。其中，一价铜离子的配位环境为变形平面三角形，陪体pymt采用μ3-S2N桥联方式参与配位。