Preparation of lithium niobate optical thin film and patterned microstructure via chemical modification

In this paper, a stable lithium niobate (LN) sol was prepared using niobium pentachloride, niobium ethoxide, lithium acetate, anhydrous ethanol, and benzoylacetone (BzAcH) as a chemical modifier. The effects of different starting materials and organic solvents on the obtained gel film quality of the sols were studied and the optimization mechanism of BzAcH on the film quality was analyzed in detail. The effects of heat treatment temperature on the structure and performance of the LN thin films were also studied. X-ray diffraction (XRD) spectra showed that LN was more highly crystalline in the heat treatment temperature range of 600–800 °C. The refractive index of the LN thin films first increased and then decreased with increasing heat treatment temperature, and the LN thin film prepared at 700 °C had the largest refractive index. Light transmittance tests showed that as the heat treatment temperature increased, light transmittance decreased. Finally, it was determined that LN gel films modified with BzAcH were more highly sensitive to UV light and that after UV irradiation, it was difficult to dissolve LN gel films in organic solvent. The UV-sensitive property was utilized to realize microstructure processing of the LN thin films. The results indicated that a high-quality, non-destructive, and photoresist-free micro-fabrication method was realized. This method was used to fabricate microscale LN fine patterns with smooth sidewalls while avoiding lateral corrosion. These results are of great significance for LN thin film applications and the development of LN-based optoelectronic devices prepared by chemical methods.     

A Ti3C2Tx-carbon black-acrylic epoxy coating for 304SS bipolar plates with enhanced corrosion resistant and conductivity

A conducting and anticorrosive coating is crucial for the application of metal bipolar plates (BP) in proton exchange membrane fuel cell (PEMFC). In this work, a Ti₃C₂T_x (T)-carbon black (C)-acrylic epoxy (AE) coating is prepared on 304 stainless steel (SS) with enhanced corrosion resistance and conductivity. The corrosion resistance of the T-C-AE coating is investigated in a 0.5 M H₂SO₄ solution as compared to the AE, T, and T-AE coatings. The T-C-AE coated 304SS exhibits the strongest corrosion resistance with the most positive corrosion potential and the lowest corrosion current density of 0.00673 μA cm^?2 in all the samples, while retaining intact and compact surface morphology with the lowest metal ion dissolution even after immersed for 720 h. The addition of Ti₃C₂T_x and carbon black into the AE matrix greatly decreases interfacial contact resistance (ICR), and the T-C-AE coating achieves a low ICR of 15.5 mΩ cm^?2 under 140 N cm^?2 compaction force. The excellent anticorrosion performance is mainly attributed to the physical barrier and the cathodic protection provided by the stacked Ti₃C₂T_x (MXene) nanosheets in the T-C-AE coating. This eco-friendly, conducting, and anticorrosive T-C-AE coating has a good application prospect on SS BP of PEMFC.     

Liquefaction behavior of fiber-reinforced calcareous sands in unidirectional and multidirectional simple shear tests

A study on the liquefaction resistance of calcareous sands reinforced with polypropylene fibers was reported. Stress-controlled cyclic simple shear tests were conducted on specimens prepared at a relative density of 50%, with and without fiber reinforcements. The liquefaction behavior was investigated by considering the effects of fiber contents ranging from 0% to 1%, fiber lengths varying from 3 mm to 12 mm and loading patterns. The results indicated that increasing fiber content and fiber length resulted in a decrease in the deformation, a reduction in pore pressure accumulation rate, and improved the liquefaction resistance of calcareous sands. Additionally, the risk of soil liquefaction could be significantly reduced when the fiber content was greater than 0.8%. The multidirectional loading had a considerable effect in reducing the liquefaction resistance compared to unidirectional loading. Further, the stiffness degradation of calcareous sands decreased with increasing fiber content and fiber length. The pore pressure generated in the cyclic tests was analyzed and was found to be affected by fiber content. A pore pressure prediction model was proposed to obtain the pore pressure characteristics of fiber-reinforced calcareous sands under various fiber content conditions.     

Finite element limit analysis of load-bearing performance of reinforced slopes using a non-associated flow rule

This paper presents a numerical study on the load-bearing performance of reinforced slopes under footing load using a finite element limit analysis (FELA) method where a non-associated flow rule is assumed in the analysis. The method was validated against results from full-scale model tests and a limit equilibrium (LE) analytical method. A series of parametric analyses was subsequently carried out to examine the influences that the soil dilation angle, footing location, and reinforcement design (i.e. length, tensile strength, and vertical spacing) could have on the load-bearing performance of reinforced slopes. Results indicate that dilation angle has a significant influence on the predicted magnitudes of bearing capacity, slope deformation, and mobilized reinforcement load. The predicted values of bearing capacity using the FELA are smaller than those from the Meyerhof's analytical method for unreinforced semi-infinite foundation, especially for larger friction angle values. Additionally, the ultimate bearing capacity of the slope and its corresponding horizontal deformation increase with the reinforcement tensile strength. Finally, the slip planes under the applied footing load are found to be y-shaped and primarily occur in the upper half of the slope.     

稀土灼烧过程温湿度场仿真分析

影响稀土灼烧工艺的因素十分复杂,关系产品质量稳定及能耗,现行工艺存在优化空间。通过剖析灼烧窑中温度和湿度分布状况,运用κ-ε双方程湍流模型、流体传热、多孔介质传热等理论,按特定组分运输模式,建立灼烧过程质量、动量和能量耦合传递数学模型。设置不同边界导入Fluent环境对数学模型进行仿真试验,完成数据处理实现工艺参数优化。结果表明所建模型能准确反映灼烧窑中温湿度场分布及变化,且最终仿真结果与实际灼烧后的产品湿度含量相符合。     

VVER-1000型机组正常运行气液态流出物源项计算

田湾3、4号机组采用俄方设计制造的VVER-1000型反应堆,其正常运行气液态流出物排放源项是检验核电厂设计是否满足国家相关环境标准的重要指标,是辐射防护最优化设计的重要内容之一。以我国压水堆核电厂源项框架体系为基础,通过分析田湾核电站相关工艺系统流程,选取合适的工艺回路部件数学模型,采用电厂设计以及实际运行经验参数,分别计算了设计与现实排放源项,并与俄方计算结果进行对比,说明采用新源项框架体系下气液态放射性流出物的变化情况。     

医用质子/重离子加速器辐射屏蔽设计概述

近年来我国医用质子/重离子加速器治癌产业开始飞速发展。粒子加速器运行时会产生次级辐射从而危及环境、公众及工作人员的辐射安全,可靠的辐射屏蔽设计是装置运行时辐射安全的必要保障。本文简要分析了医用质子/重离子加速器辐射屏蔽设计的一般考虑因素;介绍了几种常用的屏蔽计算方法并给出了计算实例。本文的研究内容对未来将要建造的医用质子/重离子加速器的辐射屏蔽设计具有一定的参考意义。     

一种基于实时几何测距的船桥主动防撞方法

本文提出一种基于实时几何测距的船桥主动防撞方法。该方法对船的改动量甚微,仅需维持多项距离矩阵,通过告警逻辑矩阵进行展示与告警,能起到很好的船桥防撞提示效果。     

Nutrient enrichment of dairy curd by incorporation of whole and ruptured microalgal cells (Nannochloropsis salina)

This work investigated incorporation of Nannochloropsis salina into renneted dairy gels and curd. Whole and ruptured microalgal cells did not impair κ-casein macropeptide cleavage by the rennet enzyme. However, insoluble components of ruptured cells impeded gelation, presumably by hindering interactions between renneted casein micelles. Confocal imaging showed that whole cells were retained and homogenously distributed within the protein network of the gels and cooked curd, whereas ruptured algae formed large aggregates that altered the protein matrix. Eicosapentaenoic acid (EPA) in the whole microalgal cells was incorporated within the curds, with considerably less EPA retained for ruptured cells. Soluble algal debris did not impair gelation, however EPA wasn't retained in the curd. The study demonstrates that nutrient enrichment of renneted dairy products is possible by incorporating whole microalgal cells to displace milk fat with protein and the beneficial long-chain omega-3 fatty acid EPA. Future research into the optimisation of product organoleptic properties is required.     

Domain reversal and current transport property in BiFeO3 films

The electrical properties and domain reversal in BiFeO₃ ferroelectric films were studied using sandwiched heterostructures and piezoresponse force microscopy. A robust polarization state was observed, combined with a switchable domain pattern and a remanent polarization of approximately 100 μC cm^?2. In addition, domain reversal was explored using scanning probe microscopy. The results show that dipoles could be reversed along the direction of the electric field under a negative tip bias, leading to carrier gathering near the domain walls. The enhanced conductivity near the domain walls was owing to the discontinuous polarization boundary conditions. In addition, typical diode-like current transport properties are sensitive to various temperature conditions, which is attributed to the Schottky barriers at the contact interface. These findings extend the current understanding of domain texture reversal in ferroelectric films and shed light on their potential applications for future ferroelectric random-access memory operations over a wide temperature range.