S/Se dual-doping promotes the formation of active Ni/Fe oxyhydroxide for oxygen evolution reaction of (sea)water splitting

Surface reconstruction produces metal oxyhydroxide (1OOH) active sites, and promoting surface reconstruction is essential for the design of OER electrocatalysts. In this paper, we reported that a large amount of active NiFeOOH was generated in-situ on the surface of nickel-iron sulfide selenide, thus exposing more active sites and efficiently catalyzing OER. In 1 M KOH solution, NiFeOOH(S,Se) achieves an ultra-low overpotential of 195 mV at the current density of 10 mA cm^?2, and the Tafel slope is only 31.99 mV dec^?1, showing excellent catalytic performance. When the current density is 100  mA cm^?2, the over-potential of NiFeOOH(S,Se) in KOH + seawater solution is 239 mV, which is almost equivalent to 231 mV in KOH solution. The excellent OER stability of the NiFeOOH(S,Se) catalyst in alkaline electrolytes was confirmed, and the overpotential did not change significantly after 4 days of testing in KOH + seawater solution.     

Wavelength-dependent photoactivity of ZnxCd1−xS and ZnCo2O4/ZnxCd1−xS for H2 and H2O2 production

Zinc cadmium sulfide (Zn_xCd_1?xS) is a good photocatalyst for hydrogen evolution reaction (HER), but an optimum x (x_m) at which a maximum HER rate is reached varies from one report to another. In this work, we examine the effect of light wavelength, not only for the HER to H₂ in the presence of Na₂S and Na₂SO₃, but also for oxygen reduction reaction (ORR) without addition of any sacrifices. For the HER under a 365 and 420 nm LED lamp, the x_m were 0.9 and 0.7, respectively. For the HER under a 330 and 395–515 nm cut-off xenon lamp, the x_m were 0.7 and 0.5, respectively. For the ORR under a 420 nm cut-off halogen lamp, a maximum production of H₂O₂ was observed at x = 0.3. Furthermore, after 4% ZnCo₂O₄ loading, Zn_xCd_1?xS had an increased activity and stability, either for the HER or for the ORR. Through a (photo)electrochemical measurement, it is proposed that the photocatalytic activity of Zn_xCd_1?xS is determined by its light absorptivity and electron reactivity. The improved performance of n-type Zn_xCd_1?xS by p-type ZnCo₂O₄ is due to formation of a p-n junction, promoting the HER (ORR) on Zn_xCd_1?xS, and the sulfide (water) oxidation on ZnCo₂O₄. This work highlights that Zn_xCd_1-xS is a promising photocatalyst for H₂ and H₂O₂ production, respectively.     

Experimental phase equilibria study and thermodynamic modelling of the PbO-“FeO”-SiO2-ZnO,PbO-“FeO”-SiO2-Al2O3 and PbO-“FeO”-SiO2-MgO systems in equilibrium with metallic Pb and Fe

Phase equilibria of the PbO-“FeO”-SiO₂-ZnO, PbO-“FeO”-SiO₂-Al₂O₃ and PbO-“FeO”-SiO₂-MgO slags with liquid Pb metal, solid or liquid Fe metal and solid oxides (cristobalite and tridymite SiO₂, willemite (Zn,Fe)₂SiO₄, wustite (Fe,Al)O_1+x, spinel (Fe,Al)₃O₄, olivine Fe₂SiO₄, corundum (Al,Fe)₂O₃, mullite Al₆Si₂O₁₃ and pyroxene (Mg,Fe)SiO₃) were investigated at 1125–1670 °C. These conditions correspond to the minimum solubility of PbO in slag in presence of Pb and Fe metals at reducing conditions and represent the limit of lead smelting and slag cleaning process. High-temperature equilibration on silica, corundum or iron foil substrates, followed by quenching and direct measurement of Pb, Fe, Si, Zn, Al and Mg concentrations in the liquid and solid phases with the electron probe X-ray microanalysis (EPMA) was used. Present data can be used to improve the thermodynamic models for all phases in this system.     

Estimation of gradient size of interfacial strain and its optimization for effective magnetoelectric coupling in (CoFe2O4) – (0.93Na0.5Bi0.5TiO3 – 0.07BaTiO3), 2-2 nano-composites

Strain-mediated coupling between the magnetic and electrically ordered phases plays a significant role in magnetoelectric (ME) nano-composites. This study explores a method to analyse and quantify interfacial strain using a grazing angle scan (α) in a ME composite optimised for a specific microstructure. The details of strain around the interface CoFe₂O₄ (CFO) – 0.93Na_0.5Bi_0.5TiO₃ – 0.07BaTiO₃ (NBT-BT) was determined by performing ‘α’ scan, in order to gather information at various depths of the NBT-BT layer around maximum intensity (110) reflection. The strain around the interface was observed to dominate over a spatial region of ～20–30 nm away from the interface. The Piezoresponse force microscopy (PFM) studies performed near the interface reveal that the strain constrain experienced by the ferroelectric layer operates such that polarisation rotation and domain wall motion are constrained compared to the strain relaxed region of the film. For effective strain transfer, heterostructures grown with optimised thicknesses (～20–30 nm) exhibited a superior inverse piezomagnetic effect.     

Recycling spent lead acid batteries into aqueous zinc-ion battery material with ultra-flat voltage platforms

The harmless disposal of lead paste in the spent lead-acid batteries (LABs) remains an enormous challenge in traditional pyrometallurgical recycling. Here, we introduced a hydrometallurgical method for the recycling of the spent LABs’ waste to obtain the β-PbO as a novel zinc ion batteries (ZIBs) active material. The obtained β-PbO exhibits ultra-flat charge/discharge voltage platforms (0.21 mV/(mAh g^?1)) and stable specific capacity. During the charge/discharge, the β-PbO spontaneously triggers the formation of (ZnSO₄)[Zn(OH)₂]₃·5H₂O (ZHS) micro-sheets as a surface passivation layer. Moreover, the ex-situ X-ray spectra reveal that the reversible phase transformation occurs between PbSO₄ and Pb with the assistance of ZHS by adjusting the PH value on the electrode-electrolyte interface. The synergistic two-phase-reaction mechanism generates ultra-flat voltage platforms upon the charge/discharge. This “energy-saving and environment-friendly” recycling route eliminates the major source of emission of pollution particulates/gases compared to the traditional pyrometallurgical recycling, while at the same time replacing energy-consuming and environmentally detrimental processes of synthesis of current ZIBs cathodes.     

滇南兰坪南厂铅锌矿矿床成因及成矿作用

南厂铅锌矿位于兰坪—思茅中生代坳陷北端，构造格局复杂，成矿条件优越。通过对矿床进行野外地质调查，对成矿地质背景、矿床地质特征、成矿机制和矿床成因进行了分析，发现南厂铅锌矿体主要呈透镜状赋存于第三系云龙组（Eyb）及下白垩统景星组（K1j1）地层中，与围岩接触部位发育微弱褪色蚀变，云龙组下段（Eya）是矿体底板有效的“屏蔽层”；区内发育原生砂岩型矿石、灰岩型矿石和氧化矿石，沉积构造特征明显，局部具有热液、变质作用改造特征；矿区地层、构造是矿床形成的重要因素，断裂构造是主要的容矿、导矿构造，高盐度热卤水沿导矿构造循环至有利层位、构造部位富集成矿，综合分析认为南厂矿床属热卤水为主的多成因层控型铅锌矿床。     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

华北地区含硫化氢地下储气库脱硫运行技术

为了进一步推动国内含H_2S地下储气库的优化运行,以华北地区X地下储气库为例,为防止其运行过程中采出的天然气因含H_2S引发的安全问题,提出了有针对性的脱硫运行技术对策。主要包括:井筒抗硫技术、含硫气井井口失控远程点火技术和地面H_2S处理技术。地下选用国产宝钢生产的D114.3 mm BGT1气密封型防硫化氢螺纹油管及耐压强度达34.5 MPa的井下安全阀。对含硫井口配备失控远程点火系统。在地面主要采用"活性炭+脱硫剂"分层装填脱硫塔的方式实现采出混合气体脱硫,并结合储气库井受双向压力及井底热传导效应促进硫溶解。通过摸索并实施一系列针对性的技术对策,X储气库完全自主实现零事故安全运行,为类似地下储气库的建设及运行提供了一定的参考。