Metal chlorides-promoted ammonia absorption of deep eutectic solvent

Ammonia is considered as a promising hydrogen or energy carrier. Ammonia absorption or adsorption is an important aspect for both ammonia removal, storage and separation applications. To these ends, a wide range of solid and liquid sorbents have been investigated. Among these, the deep eutectic solvent (DES) is emerging as a promising class of ammonia absorbers. Herein, we report a novel type of DES, i.e., metal-containing DESs for ammonia absorption. Specifically, the NH₃ absorption capacity is enhanced by ca. 18.1–36.9% when a small amount of metal chlorides, such as MgCl₂, MnCl₂ etc., are added into a DES composed of resorcinol (Res) and ethylene glycol (EG). To our knowledge, the MgCl₂/Res/EG (0.1:1:2) DES outperforms most of the reported DESs. The excellent NH₃ absorption performances of metal–containing DESs have been attributed to the synergy of Lewis acid–base and hydrogen bonding interactions. Additionally, good reversibility and high NH₃/CO₂ selectivity are achieved over the MgCl₂/Res/EG (0.1:1:2) DES, which enables it to be a potential NH₃ absorber for further investigations.     

Simply constructed highly dispersed cobalt nanoparticles in diverse N-doped graphitic carbon with remarkable performances for water electrolysis

Metal/carbon composite materials are highly promising electrocatalysts for water electrolysis. In this work, three composites of metal cobalt nanoparticles highly dispersed in N-doped carbon materials were facilely constructed by pyrolysis of different phenylenediamine based Schiff base-Co complexes (PDBs). Interestingly, the composites derived from PDBs based on different phenylenediamine exhibited different morphologies. The superior case is that rodlike composite catalyst was derived from o-phenylenediamine based PDBs. The obtained catalyst exhibited remarkable performances for both cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER), as well as overall water electrolysis. Only 172 and 289 mV of overpotentials and 1.57 V of cell voltage were exhibited at 10 mA cm^?2 for HER, OER and water splitting in 1.0 M KOH, respectively. The catalyst also displayed robust stability and high Faraday efficiency, and thus are potential high-performance catalyst for commercial water electrolysis.     

基于BIM超高层密集布筋区埋入式型钢混凝土柱脚施工技术

以漳州市某超高层项目为例,针对超高层密集布筋区埋入式型钢柱脚与钢筋的深化设计、地脚螺栓的定位预埋、型钢柱脚支撑体系设计、节点钢筋穿插连接施工、埋入式型钢柱脚安装等方面,提出切实可行的施工方法,解决了埋入式型钢混凝土柱脚的地脚螺栓精准预埋、与底板密集钢筋穿插连接施工、悬空支撑稳定等一系列施工技术难题,既满足了设计方案的要求,又可为类似工程提供借鉴。     

结合预训练模型和语言知识库的文本匹配方法

针对文本匹配任务,该文提出一种大规模预训练模型融合外部语言知识库的方法。该方法在大规模预训练模型的基础上,通过生成基于WordNet的同义—反义词汇知识学习任务和词组—搭配知识学习任务引入外部语言学知识。进而,与MT-DNN多任务学习模型进行联合训练,以进一步提高模型性能。最后利用文本匹配标注数据进行微调。在MRPC和QQP两个公开数据集的实验结果显示,该方法可以在大规模预训练模型和微调的框架基础上,通过引入外部语言知识进行联合训练有效提升文本匹配性能。     

Hybrid self-inertia weight adaptive particle swarm optimisation with local search using C4.5 decision tree classifier for feature selection problems

ABSTRACT

Feature selection is an important task to improve the classifier’s accuracy and to decrease the problem size. A number of methodologies have been presented for feature selection problems using metaheuristic algorithms. In this paper, an improved self-adaptive inertia weight particle swarm optimisation with local search and combined with C4.5 classifiers for feature selection algorithm is proposed. In this proposed algorithm, the gradient base local search with its capacity of helping to explore the feature space and an improved self-adaptive inertia weight particle swarm optimisation with its ability to converge a best global solution in the search space. Experimental results have verified that the SIW-APSO-LS performed well compared with other state of art feature selection techniques on a suit of 16 standard data sets.     

TLCD基础隔震框架结构的减振控制研究

为了避免和减轻由过大隔震层位移引起的损害,对基础隔震框架结构装设调频液柱阻尼器(tuned liquid column damper,简称TLCD)后混合系统的减振效果进行研究。建立了单层和多层混合控制系统在地震作用下的运动方程,采用TLCD-结构体系转化为调频质量阻尼器(tuned mass damper,简称TMD)-结构体系的等效方法,利用TMD参数优化公式,得到单个TLCD初始设计参数,并采用状态空间方程得到多个TLCD最优设计参数。通过对某8层基础隔震结构进行模拟,证明了该理论设计方法的合理性。该混合结构不仅可以减小隔震层位移和加速度,而且对上部结构位移和加速度反应都能更有效的控制。     

碳酸盐岩裂缝性储层常规测井评价方法

哈萨克斯坦K油田石炭系KT-Ⅱ段储层为开阔台地相中低孔、特低渗灰岩储层，裂缝对改善储层的渗流能力至关重要，前人研究的利用常规测井资料评价碳酸盐岩储层裂缝的方法由于受裂缝产状、饱和度、泥浆侵入深浅等多方面因素的影响，存在确定性差、容易误判的缺陷。基于研究区目的层段有限的取心和电成像测井资料，结合孔隙型储层和裂缝-孔隙型储层测井响应特征，提出了利用补偿中子确定基块岩石电阻率与基块声波时差，再比较二者与深侧向电阻率、声波时差的差异特征，进而综合识别储层不同产状裂缝发育段，最后建立了裂缝孔隙度、次生孔隙度、裂缝渗透率、总渗透率等储层参数的测井解释模型，实现了利用常规测井资料对碳酸盐岩油藏储层的裂缝识别及参数定量评价。该方法应用的测井综合评价成果与取心物性分析、生产动态情况能够更好地匹配，为该类油藏的合理高效开发提供了依据。     

采用信道估计法的基站VSWR实时检测

为解决无线基站宽带工作频带内电压驻波比(Voltage Standing Wave Ratio,VSWR)的实时测量，提出了一种采用信道估计法的测量方案。该方案实现简单，在基带处理单元高速率位置发送数据，依次抓取射频通道反馈和反射数据，分别求取信道响应序列，结合工厂装备测试数据，计算驻波反射系数和反射点位置。发送信号采用宽带正交频分复用信号，能检测到工作频段内任何频点处的驻波异常。有用信号前加循环前缀，并引入峰值抵消核，能正确检测到多个反射点驻波。仿真结果表明，该方案驻波测量精度和单回波点位置精度达到预期，多回波点测量能抓准外部主要故障点，在基站VSWR实时测量中具有良好的应用前景。     

Grafting of sulfamethoxazole on acrylic acid−vinyl methyl ketone copolymer using the schiff base reaction−application as a drug delivery system

A series of poly(acrylic acid-co-methylvinylketone–graft–sulfamethoxazole)(AVMDS) species was synthesized for drug carrier applications. The synthesis involved two steps: copolymerization of acrylic acid(AA) with methyl vinyl ketone(MVK) through the free radical route and subsequent grafting of the sulfamethoxazole (SMX) onto the copolymer via the Schiff base reaction of the primary amine of SMX with the carbonyl groups of the MVK units. The structures and properties of the materials were characterized by nuclear magnetic resonance(NMR), X-ray diffraction(XRD), differential scanning calorimetry(DSC), and scanning electronic microscopy (SEM). An in-vitro cytotoxicity test of the drug-carrier systems via MTT assay revealed no significant cytotoxic effect at concentrations up to 100?µg?·?ml^?1. The dynamic release of SMX from these systems through a retro-imidation reaction (inverse Schiff base reaction) was investigated in depth, where the diffusion through the polymer matrix, the enhancement of the water solubility of SMX, the influence of the initial drug concentration, the pH of the medium, and the effect of the degree of swelling of the polymer matrix on the release dynamics were evaluated. The AVMGS4 and AVMGS1 drug carrier systems containing 3.58 and 1.18?wt% of SMX were the best performing systems.     

Excision of Oxidatively Generated Guanine Lesions by Competitive DNA Repair Pathways

The base and nucleotide excision repair pathways (BER and NER, respectively) are two major mechanisms that remove DNA lesions formed by the reactions of genotoxic intermediates with cellular DNA. It is generally believed that small non-bulky oxidatively generated DNA base modifications are removed by BER pathways, whereas DNA helix-distorting bulky lesions derived from the attack of chemical carcinogens or UV irradiation are repaired by the NER machinery. However, existing and growing experimental evidence indicates that oxidatively generated DNA lesions can be repaired by competitive BER and NER pathways in human cell extracts and intact human cells. Here, we focus on the interplay and competition of BER and NER pathways in excising oxidatively generated guanine lesions site-specifically positioned in plasmid DNA templates constructed by a gapped-vector technology. These experiments demonstrate a significant enhancement of the NER yields in covalently closed circular DNA plasmids (relative to the same, but linearized form of the same plasmid) harboring certain oxidatively generated guanine lesions. The interplay between the BER and NER pathways that remove oxidatively generated guanine lesions are reviewed and discussed in terms of competitive binding of the BER proteins and the DNA damage-sensing NER factor XPC-RAD23B to these lesions.