Analysis and proposition of limiting current density measurement protocol

Limiting current density at different temperatures, backpressures, and balance gases can be used to separate molecular diffusion resistance, Knudsen diffusion resistance and local transport resistance of membrane electrode assembly (MEA). However, the measurement of limiting current density has no unified protocol. The diverse choices in the literature, either in the control of current or voltage or in the atmosphere like relative humidity and O₂ concentrations, make it difficult to compare the results and identify the true bottleneck hindering the mass transport. In this work, the current-voltage curves obtained by current scanning/stepping and voltage scanning/stepping methods under dilute O₂ of different concentrations and a wide range of relative humidity were measured and analyzed systematically. It is found that the voltage stepping method is superior to the other three ways of control for the reliable determination of the limiting current density. Aided with simultaneous electrochemical impedance spectroscopy measurement, the limiting current density can be determined with pinpoint accuracy. When the limiting current density is just used to qualitatively evaluate different MEA, the voltage scanning method can be used instead for its high time efficiency. The selection of the atmosphere also plays an important role in suppressing the distortion from excessive water and reducing the spurious contribution from proton conduction resistance. It is found that O₂ concentrations at 0.5 vol% and relative humidity at 90% can give the best estimation of O₂ transport resistance in membrane electrode assembly.     

Experimental study and model predictions on helium release in an enclosure with single or multiple vents

This paper presents experiments performed at Canadian Nuclear Laboratories (CNL) to examine the dispersion behaviour of helium in a polycarbonate enclosure that was representative of a residential parking garage. The purpose was to gain a better understanding of the effect of buoyancy- or wind-driven natural ventilation on hydrogen dispersion behaviour. Although hydrogen dispersion studies have been reported extensively in the literature, gaps still exist in predictive methods for hazard analysis. Helium, a simulant for hydrogen, was injected near the centre of the floor with a flow rate ranging from 5 to 75 standard litres per minute through an upward-facing nozzle, resulting in an injection Richardson number ranging between 10^?1 and 10². The location of the nozzle varied from the bottom of the enclosure to near the ceiling to examine the impact of the nozzle elevation on the development of a stratified layer in the upper region of the enclosure. When the injection nozzle was placed at a sufficiently low elevation, the vertical helium profile always consisted of a homogenous layer at the top overlaying a stratified layer at the bottom. To simulate outdoor environmental conditions, a fan was placed in front of each vent to examine the effect of opposing or assisting wind on the dispersion. The helium transients in the uniform layer predicted with analytical models were in good agreement with the measured transients for most tests. Model improvements are required for adequately predicting transients with primarily stratified profiles or strong opposing wind.     

Incorporating microgrids coupling with utilization of flexible switching to enhance self-healing ability of electric distribution systems

Electric distribution networks have to deal with issues caused by natural disasters. These problems possess unique characteristics, and their severity can make load restoration methods impotent. One solution that can help in alleviating the aftermath is the use of microgrids (MGs). Employing the cumulative capacity of the generation resources through MG coupling facilitates the self-healing capability and leads to better-coordinated energy management during the restoration period, while the switching capability of the system should also be considered. In this paper, to form and schedule dynamic MGs in distribution systems, a novel model based on mixed-integer linear programming (MILP) is proposed. This approach employs graph-related theories to formulate the optimal formation of the networked MGs and management of their proper participation in the load recovery process. In addition, the Benders decomposition technique is applied to alleviate computability issues of the optimization problem. The validity and applicability of the proposed model are evaluated by several simulation studies.     

哈尔滨典型街谷空间PM2.5分布场与绿色界面指数相关性 研究

在城市化快速进程的背景下，城市 街区PM2.5污染日益严重，本文选取哈尔滨 在不同季节的典型街谷空间，对以叶面积密 度（LA D）、叶面积指数（LAI）为实测要素 的绿色界面指数以及PM2.5浓度进行实测对 比研究。通过对实测数据的分析和挖掘，最 终得出如下结论：首先，典型街谷空间PM2.5 时段浓度呈现上午比下午平均高37.75%，冬 季比夏季高4.7倍的特征；其次，街谷空间的 灌木界面对PM2.5浓度场平均积极贡献率为 18.62%；最后，对PM2.5的衰减率与实测街 谷绿色界面的叶面积密度（LAD）与叶面积 指数（LAI）进行相关性分析，结果显示街谷 绿色界面对PM2.5浓度的衰减作用与叶面积 密度（LAD）呈显著负相关关系，与叶面积指 数（LAI）的相关性程度较弱。     

起·承·转·合 ——解读巍宝山长春洞空间布局的结构章法

长春洞是巍宝山保存最完整的宫 观，虽占地不到两亩①，却在有限的空间中 创造出九楼十院的空间格局。本文以长春洞 空间布局序列为研究对象，从知觉体验的 连续性入手，提出了空间变化对参观者情感 的影响，论述了在建筑空间布局序列中参观 者知觉体验逐层递进的控制机制，探讨了以 “起、承、转、合”为结构，以“知觉体验”为 章法的动态空间布局设计手法，希望为道教 建筑空间与其他超越日常的精神空间的研 究提供启示。     

Effect of sintering temperature on the transport properties of La2Ce2O7 ceramic materials

La₂Ce₂O₇ (LCO) based materials are of a paramount importance since they can be utilized for ammonium production, thermal barrier application, catalysts, hydrogen production and solid oxide fuel cells (SOFCs). In this work, a nano crystalline LCO powder was prepared using glycine-nitrate combustion method and then its properties were comprehensively characterized. The structural analysis of the synthesized LCO was carried out using conventional X-ray diffraction (XRD) and Raman spectroscopy. In a disordered phase, LCO is a biphasic mixture composed of C- and F-type phases. Densification studies were performed by sintering LCO pellets at different sintering temperatures. A densification of ≥95% was observed in all the samples with a very little variation. Sintering temperature had a marked effect on the electrical conductivity of LCO. The LCO sintered at 1100 °C showed the highest conductivity (3.68 mS/cm at 700 °C in air). The electrical conductivity was found to be decreasing with an increase in sintering temperature from 1100 to 1400 °C. To understand the behavior, the analysis of distribution function of relaxation times (DFRTs) utilized for correct separation of grain and grain boundary resistances. The presence of C- and F- type phases calculated from Raman spectra plays a crucial role in deciding conduction behavior of LCO. The results suggest a strong relationship between history of the ceramics preparation and their electrical properties.     

高效液相色谱法测定维生素K胶囊中维生素K2含量不确定度评估

目的评估高效液相色谱法测定维生素K胶囊中的维生素K_2含量的不确定度。方法采用高效液相色谱法测定维生素K胶囊中的维生素K_2含量,建立数学模型,对测定过程的主要不确定度分量进行计算,得出合成不确定度和扩展不确定度。结果维生素K胶囊中维生素K_2的含量为181.2μg/g时,在置信区间95%下,其扩展不确定度为7.5μg/g(k=2)。结论不确定度的主要来源为标准曲线配制的过程,该评估模型为维生素K胶囊中维生素K_2的含量测定的准确性提供了参考依据。     

User activities and the heterogeneity of urban space:The case of Dahiyat Al Hussein park

Urban researchers have maintained a constant interest in the complexity and continuity of urban space usage. Some have applied actor–network theory (ANT) to investigate the heterogeneity of spaces and present them through the networks of their users’ activities. However, these accounts are predominantly limited in examining the extent to which these spaces may be heterogeneous when exploring such networks. This paper draws on recent ANT scholarship, which employs an ethnographic research conducted in a main park in a housing project at Dahiyat Al Hussein in Amman, Jordan. The findings describe the complex and unpredictable negotiations that occur within spaces by documenting the varieties and interrelations among user activity networks within this common and shared urban space. This research reveals the extent to which spaces, parks in this case, may be heterogeneous by unpacking their usage. The conclusions and insights assert the necessity of paying attention to design detail and creating designs that are responsive to evolving user activities.     

Digital Extraction Column: Measurement and Modeling Techniques

The digitization of extraction columns requires a profound knowledge of the present hydrodynamics/mass transport interaction as well as appropriate measurement techniques for the detection of relevant input and target values. In this article, the different techniques for droplet size distribution as well as concentration determination are presented and new methods for online evaluation are discussed. In combination with the simulation of droplet size, holdup and solute concentration distribution, an online-capable process tool for controlling and optimizing extraction columns will be obtained.