Modification of platinum surfaces by spontaneous deposition: Methanol oxidation electrocatalysis

The presence of a second metal on platinum surfaces affects the performance of methanol oxidation. However, most of the electrocatalytic reactions are studied by using electrochemically deposited platinum alloys, but in the case of spontaneous deposition the situation is not so clear since the surface distribution, stability and morphology are usually not well documented. The formation of surface decorated samples on mono- and poly-crystalline platinum is followed by electrochemical and spectroscopic techniques and analysis of their performance towards methanol adsorption and oxidation compared with that on pure platinum. Pt/Sn and Pt/Ru are of special interest because of their well-known performance in methanol fuel cells. Methanol oxidation on Pt(111)/Ru, Pt(111)/Sn and Pt(111) shows that ruthenium is the only one able to promote the reaction since the simultaneous dissolution of tin occurs and competes with the process of interest. The in situ infrared spectroscopy is used to compare methanol oxidation on Pt(111)/Ru and Pt(111) in acid media using p-polarized light. The formation of bridge bound carbon monoxide is inhibited in the presence of ruthenium ad-species, whereas on Pt(111) the three adsorption configurations are observed. Linear sweep polarization curves and Tafel slopes (calculated from steady state potentiostatic plots) for methanol oxidation are compared on polycrystalline surfaces modified by tin or ruthenium at different coverages. There is almost no change in the Tafel slopes due to the presence of the foreign metal except for Pt/Ru, where a 0.09 V decade⁻¹ slope was calculated below 0.55 V due to hydroxyl adsorbates on ruthenium islands. The anodic stripping of methanol residues on the three surfaces indicates a lower amount of carbon monoxide-type adsorbates on Pt/Ru, and the simultaneous tin dissolution process leading to residues oxidation on Pt/Sn electrodes.     

An effective rhodium catalyst system on the synthesis of acetic acid from methyl formate

Rh/Lil/SnR₄ is an effective catalyst system for the conversion of methyl formate to acetic acid under carbon monoxide pressure. The effects of solvent and initial CO partial pressure on the turnover rate of the reaction were investigated. The possibility of replacing some of the iodide promoters by tin compounds has been probed.     

Corrosion of tin in citric acid solution and the effect of some inorganic anions

The corrosion behaviour of tin in different concentrations of citric acid solutions (0.3–1.0 M, pH=1.8) was studied at 30 °C by potentiodynamic technique. The E/I profiles exhibit an active passive behaviour. The active dissolution involves one anodic peak A associated with a dissolution of the metals as Sn(II) species. The passivity is due to the formation of thin film of SnO₂ and or Sn(OH)₄ on the anode surface. The cathodic sweep shows a small peak C related to the reduction of the passive film. The peak current density I_p of peak A increases with increasing both acid concentration and sweep rate.

The effects of adding increasing concentrations of Na₂CrO₄, NaMoO₄, NaNO₃ and NaNO₂ on the corrosion of tin in 0.5 M citric acid at 30 °C were investigated. Both CrO₄²⁻ and MoO₄²⁻ ions inhibit the corrosion of tin and the extent of inhibition enhances with their concentrations. Addition of either NO₃⁻ or NO₂⁻ accelerates the corrosion of tin. NO₃⁻ ions are more aggressive than NO₂⁻ ions.     

SnO催化合成环烷酸乙二醇酯增塑剂的研究

介绍了用SnO非酸性催化剂催化合成环烷酸乙二醇酯增塑剂(NAEP)的方法。讨论了反应温度、醇酸摩尔比、催化剂用量和反应时间等因素对酯化反应的影响,给出了适宜的工艺条件。 NAEP应用于PVC电缆料及丁腈橡胶配方中取得了良好的效果。与邻苯二甲酸酯增塑剂相比,具有更好的经济价值。     

铟（Ⅲ）－钼酸铵－罗丹明B显色反应体系的研究及其应用

铟（Ⅲ）与钼酸铵和罗丹明Ｂ在ＰＶＡ存在下的酸性水溶液中形成离子缔合物而产生显色反应，该体系的灵敏度高，摩尔吸光系数ε＝２．４４×１０５Ｌ·ｍｏｌ－１ｃｍ－１，离子缔合物稳定性好，至少稳定４８ｈ。研究了显色体系的光度特性和３０多种共存离子的影响，该法应用于纯锡中痕量铟的测定，结果满意。     

硫化矿床开采特高温炮孔的装药爆破安全技术

本文阐述了高温矿床火区开采特高温炮孔的装药爆破安全技术。提出了掌握炸药安全使用温度,采取隔离、隔热包装,降低孔温及提高临界温度等安全措施。     

Influence of Pd doping on morphology and LPG response of SnO2

In the present study nanocrystalline pristine and Pd-doped SnO₂ (Pd:SnO₂) with various mol% Pd have been synthesized by a modified Pechini citrate route. Transmission electron microscopy and X-ray powder diffraction studies were used to characterize the morphology, crystallinity, and structure of the SnO₂ and Pd:SnO₂. The response of the pristine SnO₂ and Pd:SnO₂ was studied towards different reducing gases. The 1.5 mol% Pd doping showed an enhanced response of 75 and 95% towards LPG at as low as 50 and 100 °C, respectively, which were quite large high value as compared with pristine SnO₂ (38 and 35% at 50 and 100 °C, respectively). Structural characterization revealed that Pd doping reduced the crystallite size of SnO₂ and helps in the formation of distinct spherical nanospheres at a calcinations temperature of 500 °C. Thus the increase in LPG response can be correlated with the spherical morphology, a decrease in the crystallite size (11 nm) due to doping with Pd as compared with the pristine SnO₂ (26 nm) and main role of Pd as a catalyst.     

CuO/SnO2-In2O3 sensor for monitoring CO concentration in a reducing atmosphere

The CO sensing property of CuO-loaded SnO₂-In₂O₃ sensor was investigated in a reducing atmosphere. The sensor response to CO for CuO/SnO₂-In₂O₃ (8/2) was much higher than that for CuO/SnO₂ in the range of 200-1000 ppm of CO concentration. Such a high sensor response of CuO/SnO₂-In₂O₃ may originate from the high dispersion of CuO playing a role as sensing site.