Low threshold voltage,highly stable electroforming-free threshold switching characteristics in VOx films-based device

Threshold switching (TS) devices have evolved as one of the most promising elements in memory circuit due to their important significance in suppressing crosstalk current in the crisscross array structure. However, the issue of high threshold voltage (V_th) and low stability still restricts their potential applications. Herein, the vanadium oxide (VO_x) films deposited by the pulsed laser deposition (PLD) method are adopted as the switching layer to construct the TS devices. The TS devices with Pt/VO_x/Pt/PI structure exhibit non-polar, electroforming-free, and volatile TS characteristics with an ultralow V_th (+0.48 V/−0.48 V). Besides that, the TS devices also demonstrates high stability, without obviously performance degradations after 350 cycles of endurance measurements. Additionally, the transition mechanism is mainly attributed to the synergistic effect of metal-insulator transition of VO₂ and oxygen vacancies. Furthermore, the nonvolatile bipolar resistance switching behaviors can be obtained by changing oxygen pressure during the deposition process for switching films. This work demonstrates that vanadium oxide film is a good candidate as switching layer for applications in the TS devices and opens an avenue for future electronics.     

Green preparation of vanadium carbide through one-step molten salt electrolysis

Vanadium carbide (VC) as excellent ceramic and functional material is usually prepared by carbothermal reduction of V₂O₅ which must be extracted from a typical V slag by complex processes. Pollutants, such as ammonia-nitrogen wastewater, NH₃ and CO₂ are inevitably discharged. A novel and green method for VC preparation was proposed by one-step co-electrolysis of soluble NaVO₃ and CO₂ in molten salt. It was found that VC with high purity was easily obtained by reducing electrolysis temperature and CO₂ flow rate to 600 °C and 10 mL min⁻¹ at 3.0 V. Besides VC with particles and layered stacking structure in products, a small amount of carbon and oxygen elements existed. The atomic percentage contents of C, V, and O elements in VC were about 50.0%, 44.5% and 3.8%, respectively. During electrolysis, CO₃²⁻ and VO₃⁻ was reduced at about −0.55 V (vs. Ag/AgCl) and −1.38 V (vs. Ag/AgCl), respectively. CO₃²⁻ ions were more easily reduced than VO₃⁻, and was firstly reduced to CO₂²⁻ and then converted to C. Then, VC was prepared by two routes from CO₂ and NaVO₃. One route is that VO₃⁻ ions are firstly electroreduced to VO₂⁻ ions and then are further electroreduced to VC with C. Another route is that VO₃⁻ ions are electroreduced to V which in-situ reacted with C to VC. Both VO₃⁻ and CO₃²⁻ ions are electroreduced by two-step process. In final, VC is in-situ deposited on cathode. It provides a novel and green way to prepare VC and also achieves the high value-added utilization of vanadium slag and CO₂.     

Photoluminescence and decay characteristics of cerium,gallium and vanadium - containing borate-based bioactive glass powders for bioimaging applications

Biomaterials having photoluminescent properties play a crucial role in real-time bioimaging after in vivo implantation. In this study, photoluminescence properties and decay characteristics of the borate-based 13–93B3 glasses containing different concentrations of cerium, gallium, and vanadium oxides were investigated for biomedical applications. The borate-based bioactive glass powders were prepared using melt-quench technique and size reduction was performed through planetary ball milling. Bioactivity of the prepared powders was investigated in simulated body fluid at 37 °C under static conditions. The photoluminescent properties and decay kinetics of the as-prepared and the SBF-treated bioactive glass powders were analyzed by steady-state and time-resolved photoluminescence measurements. Results revealed that the cerium activated glasses exhibited an intense luminescence centered at 538 nm. Broad-band emission of the gallium and vanadium doped samples was centered at 440 and 572 nm, respectively. All of the SBF-treated glasses exhibited enhanced lifetimes and bi-exponential decays both in nanosecond and microsecond regime measurements. It was concluded that depending on the dopant concentration, bioactive glass particles prepared in the study showed remarkable photoluminescence and have potential to be used in bioimaging applications.     

Novel branched sulfonated polyimide membrane with remarkable vanadium permeability resistance and proton selectivity for vanadium redox flow battery application

A series of novel branched sulfonated polyimide (bSPI-x) membranes with 8% branched degree are developed for application in vanadium redox flow battery (VRFB). The sulfonation degrees of bSPI-x membranes are precisely regulated for obtaining excellent comprehensive performance. Among all bSPI-x membranes, the bSPI-50 membrane shows strong vanadium permeability resistance, which is as 8 times as that of commercial Nafion 212 membrane. At the same time, the bSPI-50 membrane has remarkable proton selectivity, which is four times as high as that of Nafion 212 membrane. The bSPI-50 membrane possesses slower self-discharge speed than Nafion 212 membrane. Furthermore, the bSPI-50 membrane achieves stable VRFB efficiencies during 200-time charge-discharge cycles at 120–180 mA cm^?2. Simultaneously, the bSPI-50 membrane exhibits excellent capacity retention compared with Nafion 212 membrane. All results imply that the bSPI-50 membrane possesses good application prospect as a promising alternative separator of VRFB.     

蒸压建材生产过程中钢渣安定性处理与活性化利用

钢渣安定性处理过程常常造成胶凝活性的损失。为此，本文利用改性助剂消除钢渣水化过程中产生的氢氧化物并生成胶凝产物，在蒸压建材的生产过程中实现钢渣安定性处理和游离氧化物的活性化利用，并避免单独处置钢渣造成的活性物质损失。研究表明，8%秸秆灰和3%磷酸二氢铵作为复合助剂制备的尾矿-钢渣蒸压试块体积稳定，抗压强度达24.0MPa。通过对蒸压样品游离氧化物消解率、化学结合水量及热重、XRD分析，得出钢渣安定性处理与活性化利用机制：硅质材料与钢渣中f-CaO水化生成的Ca(OH)₂结合迅速生成对体系力学强度有益的水化硅酸钙，避免因大量Ca(OH)₂积累造成体积膨胀；磷酸盐中的NH₄⁺、H₂PO₄^-与f-MgO结合生成磷酸铵镁及其他低溶度积复盐类矿物，进而消除因f-MgO水化生成Mg(OH)₂造成体积膨胀的隐患。试样在180℃蒸压4h后，f-CaO及f-MgO消解率分别可达86.28%、89.73%。本文将为利用钢渣大比例取代水泥和石灰生产蒸压建筑材料提供理论基础，对于提高钢渣利用率、减少碳排放具有重要价值。     

Analysis of suitability of TPP ash-slag waste as materials for hydrogen fuel storage

The current trends in energy were described, the main of which is the use of alternative energy sources, especially hydrogen. The most common methods of hydrogen accumulation were proposed: accumulation of compressed gaseous hydrogen in high-pressure tanks; accumulation of liquid hydrogen in cryogenic tanks; storing hydrogen in a chemically bound state; accumulation of gaseous hydrogen in carriers with a high specific surface area. Based on the combination of advantages and disadvantages, the most promising methods of accumulation were selected: storage of liquid hydrogen and storage of hydrogen in carriers with a high specific surface area. The main requirement for materials for hydrogen storage by these methods was revealed – a high specific surface area. Prospects for the development of waste-free low-emission technologies due to the recycling of secondary raw materials and the development of low-temperature technologies for the synthesis of functional and structural materials were substantiated. The applicability of large-scale ash and slag waste from coal-fired thermal power plants as a raw material for obtaining materials by low-temperature technologies was shown. The traditional ways of using ash and slag waste as a raw material, active additive and filler in the production of cements were described. Modern technologies for the production of innovative materials with a unique set of properties were presented, namely carbon nanotubes, silica aerogel and geopolymer materials. The prospect of using geopolymer matrices as a precursor for the synthesis of a number of materials was described; the most promising type of materials was selected – geopolymer foams, which are mainly used as sorbents for purifying liquids and gases or accumulating target products, as well as heat-insulating materials. The possibility of obtaining products of any shape and size on the basis of geopolymer matrices without high-temperature processing was shown. The special efficiency of the development of the technology of porous granules and powders obtained from a geopolymer precursor using various methods was substantiated. The obtained granules can be used in the following hydrogen storage technologies: direct accumulation of hydrogen in porous granules; creation of insulating layers for liquid hydrogen storage units.     

Uniform cobalt grafted on vanadium nitride as a high efficient oxygen evolution reaction catalyst

The rational design of highly effective and low-cost catalysts for oxygen evolution reaction (OER) is of prime importance for the development of water splitting. However, the activity of electrocatalysts still needs enhancement to satisfy the practical application. Herein, we report Co nanoparticles grafted on vanadium nitride (VN) surface via in situ phase separation method by nitriding Co₂V₂O₇ precursor. Benefiting the advantages of abundant active sites of Co, high conductivity and corrosion resistance of VN, the Co/VN achieves incredibly high activity and durability for OER with a low overpotential of 320 mV at a current density of 10 mV cm^?2 with a small Tafel slope of 50.4 mV dec^?1 and long-term stability. In addition, the in situ Raman further reveals the synergistic effect of Co and VN. Significantly, this study may enrich our knowledge and it can be extended to prepare other interconnected framework structures for the development of OER catalysts.     

Chromium-promoted preparation of forsterite refractory materials from ferronickel slag by microwave sintering

The chromium-promoted preparation of forsterite refractory materials from ferronickel slag was investigated by microwave sintering of the slag with the additions of sintered magnesia and 0–10 wt% chromium oxide (Cr₂O₃). The thermodynamic calculations revealed that the addition of Cr₂O₃ can promote the formations of spinel and liquid phase and maintain high content of forsterite below 1500 °C. The experimental results showed that there existed a stronger promoting effect of Cr₂O₃ additive on the properties of refractory materials in the microwave field than that in conventional sintering. It was attributed to the preferential formation and growth of spinel with stronger microwave absorption than other phases (e.g., enstatite), the existence of more forsterite, and the enhanced densification in association with the presence of more liquid phase at the same temperature. By microwave sintering of the mixture of ferronickel slag, 25 wt% sintered magnesia, and 4 wt% Cr₂O₃ at 1350 °C for 20 min, a superior refractory material with refractoriness of 1801 °C, thermal shock resistance of 6 times, bulk density of 2.97 g/cm³, apparent porosity of 1.4%, and compressive strength of 197 MPa was obtained. Compared with that prepared by conventional sintering at 1350 °C for 2 h, the refractoriness and thermal shock resistance were increased by 175 °C and 100%, respectively. The present study provided a novel method for preparing high-quality refractory materials from ferronickel slag and relevant industrial wastes.     

Effect of the type of superplasticizer on the properties of cementitious systems incorporating slag

Superplasticizers have become an integral ingredient in the formulation of concretes. After 40?years, their use and dosage remain uncertain due to variations in their compositions and those of cement. In addition, the substitution of cement by supplementary cementitious materials having different chemical compositions exacerbates the problem without counting the multiplicity of superplasticizers to choose from. The present work consists of a study of the rheological and mechanical properties of cementitious systems containing slag and various types of superplasticizers. The tests were carried out on pastes, mortars and concretes incorporating slag in partial cement replacement and four superplasticizers types, polynaphthalene sulphonate (PNS) and three polycarboxylates (PC). The results of this study demonstrate that the viscosity and the yield stress increase with the rate of incorporation of the slag. The air increases with the polycarboxylates but this effect is less perceptible in the presence of the slag. Polycarboxylates improve workability more than PNS. The use of polycarboxylates reduces the viscosity and the yield stress. The compressive strength of concretes containing slag is low at early age but high at long run. They exhibit good resistances to scaling. The permeability to chloride ions is considerably reduced in the presence of the slag independently of the type of superplasticizer, suggesting good durability of these concretes in potentially aggressive external environments.     

Vanadium promoted Ni(Mg,Al)O hydrotalcite-derived catalysts for CO2 methanation

A series of V-promoted hydrotalcite-derived nickel catalysts (1.0, 2.0, and 4.0 wt%) were tested in CO₂ methanation. Ni–I–V2.0 with 2.0 wt% vanadium loading showed the highest catalytic activity, achieving 74.7% of CO₂ conversion and 100% of CH₄ selectivity at 300 °C. XRD and XANES analyses showed that the smallest Ni⁰ particles in Ni–I–V2.0 were consistent with the improved textural features observed for this catalyst. Moreover, CO₂-TPD revealed the highest sum of weak and medium basic sites in Ni–I–V2.0 that can positively influence catalytic behavior. For the studied catalysts, a clear correlation was demonstrated between the catalytic activity and specific surface area, as well as the basic properties.