Alterations in the Genomic Distribution of 5hmC in In Vivo Aged Human Skin Fibroblasts

5-Hydroxymethylcytosine (5hmC) is a functionally active epigenetic modification. We analyzed whether changes in DNA 5-hydroxymethylation are an element of age-related epigenetic drift. We tested primary fibroblast cultures originating from individuals aged 22–35 years and 74–94 years. Global quantities of methylation-related DNA modifications were estimated by the dot blot and colorimetric methods. Regions of the genome differentially hydroxymethylated with age (DHMRs) were identified by hMeDIP-seq and the MEDIPS and DiffBind algorithms. Global levels of DNA modifications were not associated with age. We identified numerous DHMRs that were enriched within introns and intergenic regions and most commonly associated with the H3K4me1 histone mark, promoter-flanking regions, and CCCTC-binding factor (CTCF) binding sites. However, only seven DHMRs were identified by both algorithms and all of their settings. Among them, hypo-hydroxymethylated DHMR in the intron of Rab Escort Protein 1 (CHM) coexisted with increased expression in old cells, while increased 5-hydroxymethylation in the bodies of Arginine and Serine Rich Protein 1 (RSRP1) and Mitochondrial Poly(A) Polymerase (MTPAP) did not change their expression. These age-related differences were not associated with changes in the expression of any of the ten-eleven translocation (TET) enzymes or their activity. In conclusion, the distribution of 5hmC in DNA of in vivo aged human fibroblasts underwent age-associated modifications. The identified DHMRs are, likely, marker changes.     

Genetic and genomic analysis of age at first insemination in Israeli dairy cattle

We performed a genetic analysis of age at first insemination, including estimation of the heritability and genetic correlations with other economic traits, and the consequences of including this trait in the Israeli selection index. The genetic factors affecting age at first insemination were determined via GWAS. Five data sets were analyzed. Data sets 1, 2, and 3 were used to compute variance components among age at first insemination, first calving age, days from first insemination to calving, and the 9 traits included in the Israel breeding index. Heritabilities for age at first insemination, calving age, and days from first insemination to calving in Israeli Holsteins as computed by REML individual animal model analyses of 273,239 Israeli Holstein cows were 0.072, 0.042, and 0.014. The estimated genetic correlation between the first 2 traits was 0.88. In addition to the fact that heritability of age at first insemination is 1.7 times the heritability for calving, the former trait has the advantage that the number of records is greater, and the records are generated earlier. Absolute values of the genetic and residual correlations between age at first insemination and the 9 traits included in the Israeli index were all less than 0.2. Data set 4 included first insemination dates of 1,181,600 calves born from 1985 through 2018. Genetic evaluations were computed by a single trait animal model. Annual phenotypic and genetic trends for age at first calving for calves born since 1985 were “positive,” that is, economically negative, at 0.320 ± 0.003 and 0.169 ± 0.005 d, respectively. Applying the GCTA-GREML software, 54% of variance in the transmitting ability of 1,585 sires could be explained by considering all 40,498 markers included in the GWAS analysis. The significant markers were mainly associated with milk production genes. The SNP UA-IFASA-8854 on chromosome 11 had the lowest probability value, 1.2 × 10^?24. This marker is located between the genes RETSAT and ELMOD3, both of which are overexpressed in human mammary glands. The gene RETSAT is reported to be essential for lipid accumulation and adipogenesis promotion. Gene enrichment analysis found that genes in the genomic region flanking significant markers are associated with vasopressin receptor activity, which was shown to mediate puberty in humans. If age at first insemination is included in the index with a weighting to account for 9% of the index, reductions of 2.8 and 2.6 d for age at first insemination and first calving age after 10 yr of selection are predicted, as compared with reductions of 1.4 and 1.1 d with the current index. Gains for the other index traits are only marginally affected. We suggest selection on age at first insemination as an alternative to selection for early calving.     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Effect of heat treatment and zircon addition on the properties of low-cement castables based on recycled alumina grog

In this investigation, low-cement castables were prepared using 70% alumina grog aggregates obtained from crushed alumina brick waste. The aggregates were thermally treated at 1550 °C for 3 h. Four types of low-cement castables were prepared with various types of aggregates (alumina grog with or without thermal treatment) and fillers (with or without zircon addition), and they were evaluated in terms of their physical, thermal, and chemical properties. Microstructural analysis via scanning electron microscopy (SEM) was performed on the castables before and after slag attack. Compared to the other fabricated castables, the thermally treated alumina grog castables with zircon showed better physical properties, such as a higher bulk density, cold crushing strength, and modulus of rupture and a lower apparent porosity and water absorption. In addition, they had a higher positive linear thermal expansion, refractoriness under load, permanent linear change, and hot modulus of rupture. The results of the SEM with energy dispersive X-ray analysis of the prepared castables confirmed that the mullite and anorthite phases were predominant when zircon was not added and the zircon–mullite phase additionally appeared upon the incorporation of zircon. A quantitative elemental analysis via X-ray fluorescence spectroscopy was employed to determine the composition of the castables. X-ray diffraction analysis showed that the alumina grog castables had a high mullite and low anorthite content, and the thermally treated alumina grog had a high anorthite, low mullite, and high zircon content. The improvement in the mechanical and thermo-mechanical properties of the castables with thermally treated alumina grog and added zircon can be attributed to the formation of the zircon–mullite phase with a low mullite phase content.     

武汉市一般人群血清中全氟及多氟烷基化合物浓度及其影响因素研究

目的 了解武汉市一般人群血清中全氟及多氟烷基化合物(PFASs)浓度,探索血清中PFASs浓度水平的影响因素。方法 以在武汉市某医院进行一般体检的人群为研究对象(n=67),通过超高效液相色谱-三重四级杆质谱(UPLC-TQ/MS)联用仪测定外周血清中12种PFASs浓度,采用多元线性回归分析方法分析一般人口学特征和血清中PFASs浓度的关联性。结果 武汉市一般人群血清中12种PFASs的平均浓度水平为11.60 ng/mL。全氟辛烷磺酸及其盐类(PFOS)和全氟辛酸及其盐类(PFOA)的贡献率较大,分别为45.03%和31.86%。男性人群血清中PFOS、PFOA、全氟己基磺酸(PFHxS)、全氟壬酸(PFNA)等主要化合物的浓度高于女性,其β值(95%可信区间)分别为0.708(0.313,1.104)、0.518(0.069,0.967)、0.724(0.388,1.059)和0.684(0.399,0.968)。同时,发现血清中PFOS、PFHxS、PFNA浓度和年龄呈正相关,其β值(95%可信区间)分别为0.062(0.042,0.081)、0.035(0.019,0.052)和0.030(0.016,0.045)。结论 性别和年龄对血清中PFASs浓度有影响,在进行人体PFASs暴露评估中应考虑这些因素。     

养护龄期对EDTA滴定法测定尾砂胶结充填体水泥含量的影响研究

在应用EDTA滴定法测尾砂胶结充填体水泥含量中,因充填体的EDTA二钠标准溶液消耗量随养护龄期的增长而降低导致测定不同养护龄期充填体的水泥含量需分别制定标准曲线,为研究养护龄期对充填体EDTA二钠标准溶液消耗量的影响,本文通过开展试验研究,并利用扫描电镜(SEM)分析技术进一步验证试验结果,得出养护龄期主要是通过影响水泥水化进程,进而影响NH4Cl弱酸溶液溶解充填体中的Ca2 含量而影响充填体EDTA二钠标准溶液消耗量的结论。     

Ceramic shell moulds with zircon filler and colloidal silica binder for investment casting of shrouded low-pressure turbine blades

Zircon (ZrO₂·SiO₂) powder filler and colloidal silica binder were used to prepare the ceramic shell moulds for investment casting of shrouded low-pressure turbine blades (LPTB). Ceramic slurries were prepared by using two types of colloidal silica binders (polymer-free binder A and polymer-containing binder B). The samples prepared from binder B showed lesser self-load sag values than those developed from binder A. Ceramic shell moulds made from an optimized slurry composition (having binder A) yielded aeronautical grade casting of blades at 1500 °C with required dimensional accuracy and average surface roughness (Ra). The blades cast from shell moulds (having binder B) showed dimensional accuracy at 1500 °C as well as at 1525 °C. The Ra values of blades cast at 1500 °C and 1525 °C by using shell system with binder B were observed to be higher than those cast from shell system having binder A.     

A Clearance Period after Soluble Lead Nanoparticle Inhalation Did Not Ameliorate the Negative Effects on Target Tissues Due to Decreased Immune Response

The inhalation of metal (including lead) nanoparticles poses a real health issue to people and animals living in polluted and/or industrial areas. In this study, we exposed mice to lead(II) nitrate nanoparticles [Pb(NO₃)₂ NPs], which represent a highly soluble form of lead, by inhalation. We aimed to uncover the effects of their exposure on individual target organs and to reveal potential variability in the lead clearance. We examined (i) lead biodistribution in target organs using laser ablation and inductively coupled plasma mass spectrometry (LA-ICP-MS) and atomic absorption spectrometry (AAS), (ii) lead effect on histopathological changes and immune cells response in secondary target organs and (iii) the clearance ability of target organs. In the lungs and liver, Pb(NO₃)₂ NP inhalation induced serious structural changes and their damage was present even after a 5-week clearance period despite the lead having been almost completely eliminated from the tissues. The numbers of macrophages significantly decreased after 11-week Pb(NO₃)₂ NP inhalation; conversely, abundance of alpha-smooth muscle actin (α-SMA)-positive cells, which are responsible for augmented collagen production, increased in both tissues. Moreover, the expression of nuclear factor κB (NF-κB) and selected cytokines, such as tumor necrosis factor alpha (TNFα), transforming growth factor beta 1 (TGFβ1), interleukin 6(IL-6), IL-1α and IL-1β , displayed a tissue-specific response to lead exposure. In summary, diminished inflammatory response in tissues after Pb(NO₃)₂ NPs inhalation was associated with prolonged negative effect of lead on tissues, as demonstrated by sustained pathological changes in target organs, even after long clearance period.     

Preparation and corrosion resistance of cordierite–spodumene composite ceramics using zircon as a modifying agent

To prolong the service life of cordierite–spodumene composite ceramics applied to the solar heat transmission pipeline, the zircon modifier was introduced to improve the corrosion resistance of the ceramics. The effects of zircon on the density, bending strength, crystalline phase, microstructure and chemical stability were studied. The results showed that the sintering temperature range of the composite ceramics was broadened to 40–60?°C with the introduction of 5–15?wt% zircon. Moreover, the mechanical strength and corrosion resistance of the ceramic materials were improved with the zircon introduction. In particular, sample C3 containing 15?wt% of zircon and sintered at 1360?°C exhibited the best performance, which had the 0.03% Wa, 0.07% Pa, 2.34?g?cm^?3 Db and 100.17?MPa bending strength. After acid and alkali corrosion, the water absorption was still less than 0.5% and the strength loss rate decreased to less than 5.3%. The XRD and SEM analyses demonstrated that the ZrSiO₄ grains dispersed at the grain boundaries could enhance the mechanical properties. Furthermore, the existence of the Zr⁴⁺ ions not only reduced the cationic solubility of the glassy phases but also led to a reaction with OH^? to form Zr(OH)₄ on the surfaces. This improved the corrosion resistance of the composite ceramics and endowed it with a high residual strength after the acid and alkali corrosion.     

浅论中国造纸术起源争议的两大观点——基于出土纸状物是否为纸及其断代的视角

蔡伦是纸的发明者亦或改良者,其争论古已有之。近几十年来,学者们从历史文献、考古实物、测试分析、模拟复原等方面对造纸术的起源进行了相当深入的研究。本文主要基于支持蔡伦发明造纸术的王菊华先生所主编的《中国古代造纸工程技术史》和支持蔡伦改良造纸术的潘吉星先生所著的《中国造纸史》中关于造纸术起源的相关研究,总结出了两个核心问题:出土纸状物是否为纸及其断代。笔者认为,若能在相关部门的大力支持下,多学科专家通力合作,应能更有力地推进这一研究。