Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

某铁矿强磁尾矿反浮选回收试验研究

针对我国西部某铁矿强磁选尾矿进行了反浮选回收铁资源的试验研究, 探讨了pH值、抑制剂可溶性淀粉用量、阳离子捕收剂十二胺用量对浮选指标的影响。结果表明, 在矿浆pH=10、可溶性淀粉用量2 400 g/t、十二胺用量400 g/t条件下进行一粗一精(精选药剂用量减半)闭路反浮选, 可获得铁品位43.88%、回收率50.93%的铁精矿产品。     

Complex Mechanisms of Antimony Genotoxicity in Budding Yeast Involves Replication and Topoisomerase I-Associated DNA Lesions,Telomere Dysfunction and Inhibition of DNA Repair

Antimony is a toxic metalloid with poorly understood mechanisms of toxicity and uncertain carcinogenic properties. By using a combination of genetic, biochemical and DNA damage assays, we investigated the genotoxic potential of trivalent antimony in the model organism Saccharomyces cerevisiae. We found that low doses of Sb(III) generate various forms of DNA damage including replication and topoisomerase I-dependent DNA lesions as well as oxidative stress and replication-independent DNA breaks accompanied by activation of DNA damage checkpoints and formation of recombination repair centers. At higher concentrations of Sb(III), moderately increased oxidative DNA damage is also observed. Consistently, base excision, DNA damage tolerance and homologous recombination repair pathways contribute to Sb(III) tolerance. In addition, we provided evidence suggesting that Sb(III) causes telomere dysfunction. Finally, we showed that Sb(III) negatively effects repair of double-strand DNA breaks and distorts actin and microtubule cytoskeleton. In sum, our results indicate that Sb(III) exhibits a significant genotoxic activity in budding yeast.     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

Measurement and analysis of the extreme ultraviolet emission band of laser-produced antimony plasmas

The temporal evolution of extreme ultraviolet (EUV) emission spectra of laser-produced antimony (Sb) plasmas has been measured in the 7–16 nm wavelength region using spatio- temporally resolved lase-produced plasma spectroscopy technique. The spectral profiles involve an intense quasi-continuous band with superimposed intense characteristic radiation and are different with the increase of delay time. The spectral structures were also analyzed according to Hartree–Fock calculations with configuration interaction effects and contributed from 4d–4f, 4d–4p, and 4d–5f unresolved transition arrays of Sb⁷⁺ – Sb¹³⁺. A steady-state collisional- radiative model was used to estimate the electron temperature and density range of Sb plasmas. This work would enrich the spectral data of highly-charged ions and provided a possible selection for developing EUV light sources.     

攀西钒钛磁铁矿尾矿制备储水泡沫陶瓷的研究

以攀西钒钛磁铁尾矿和废玻璃为主要原料通过高温烧结法制备储水泡沫陶瓷，研究原料配比和发泡剂（SiC）添加量对材料性能的影响。结果表明:随着钒钛磁铁矿尾矿含量的增加，材料的体积密度及抗压强度逐渐增大，平均气孔孔径逐渐减小；当尾矿添加量为50 wt%，材料的体积吸水率出现极值。当SiC添加量为0.3 wt%，材料内部气孔分布均匀，平均孔径约为2.93 mm。最终以50.0 wt%的钒钛磁铁矿尾矿和50.0 wt%的废玻璃为原料，外加3.0 wt%的石英，0.3 wt%的SiC，3.0 wt%的Na3PO4，在1040℃下制得性能最优的储水泡沫陶瓷，材料的体积密度为0.26 g/cm-3、体积吸水率为56.5%和抗压强度为0.68 MPa。采用SEM、XRD等检测手段研究材料的微观形貌及物相组成，结果表明储水泡沫陶瓷内部由三维立体结构组成，有利于储存水分；材料主要物相包括硅灰石、长石、透辉石和钛铁矿。      

影响干式磁选机在石英除铁过程中的因素研究

本文通过对陕西某地石英矿进行干式磁选试验研究,介绍了给料速度、尾矿抛尾率、矿样含水率及含泥量等几个因素对干式磁选作用的影响,分析了干式磁选各因素在石英除铁过程中的规律,为后续工业应用提供一定的理论基础。     

改性三氧化二锑协效二乙基次磷酸铝阻燃PA6研究

采用硅烷偶联剂（KH560）对三氧化二锑（Sb₂O₃）进行表面改性处理，并将其协效二乙基次磷酸铝（ADP）应用于聚酰胺6（PA6）阻燃研究。采用傅里叶变换红外光谱和热失重分析对改性Sb₂O₃进行表征，运用垂直燃烧、氧指数、锥形量热仪、热分析以及扫描电子显微镜和拉曼光谱等对阻燃PA6进行了阻燃性能及机理分析。结果表明，改性 Sb₂O₃与Sb₂O₃相比，与ADP具有更好的协同阻燃效应，其作用机制主要是在气相发挥阻燃作用；当ADP含量为8 %，改性Sb₂O₃含量为2 %时，阻燃PA6复合材料的UL 94等级达到V?0级，极限氧指数达到33.8 %。     

基于彩色图像处理的浮选尾煤灰分软测量研究

浮选尾煤灰分是浮选产品的一个重要指标。针对选煤厂浮选尾煤灰分多采用离线检测而无法实现在线准确测量，以及当前浮选软测量多采用单一的灰度图像从而导致软测量模型精度及适应性较差的问题，提出了一种基于彩色图像处理的浮选尾煤软测量方法，建立了基于最小二乘支持向量机(LSSVM)的浮选尾煤灰分软测量模型。模型以不同颜色空间的彩色特征、灰度均值以及浓度特征为输入变量，以尾煤灰分作为输出变量，采用粒子群优化算法对LSSVM模型参数进行优化。结果表明：所建立的尾煤灰分软测量模型可以较好地实现浮选尾矿灰分的在线预测，引入浮选尾矿图像的彩色特征可以提高尾煤图像分析的精度，预测精度达96.89%。研究成果在柳湾选煤厂现场应用，并取得了较好的尾矿灰分测量效果。     

北洺河铁矿全尾砂胶结充填治理塌陷区的可行性研究

北洺河铁矿为践行“绿水青山就是金山银山”的绿色发展理念,探索利用选厂尾矿治理地表塌陷区方案。通过对北洺河铁矿塌陷区稳定性分析以及对全尾砂膏体制备、输送、胶结充填技术可行性试验研究,并结合经济估算、环境和社会效益等综合分析,认为全尾砂胶结充填治理塌陷区的方案可行。