Investigating the wicking behavior of micro/nanofibrous core-sheath PET–PAN yarn modified by dimethyl 5-sodium sulfoisophthalate

The present research aims at imparting an improved wicking ability to the recycled multifilament yarns by wrapping composite nanofibers to attain an efficient material for filtration purposes. Therefore, polyacrylonitrile nanofibers containing dimethyl 5-sodium sulfoisophthalate nanoparticles were wrapped around the recycled poly(ethylene terephthalate) yarn by means of a novel electrospinning technique. Several tests were performed to investigate the parameters affecting wicking rise and moisture regain of the samples. Taguchi method was used in two separate designs (with or without nanoparticles). Some factors such as polymer solution concentration, mass ratio of nanoparticles, take-up rate, and number of filaments were considered as the variable factors while yarn wicking rate and moisture regain were the response factors. It was found that the hydrophilic nature of nanoparticles together with the ultrafine structure of nanofibers provide yarns with enhanced wicking properties. Although solution concentration is the predominant factor in wicking rate of the yarns containing nanoparticles, the most effective factor in wicking rise and moisture regain for other cases is the number of filaments. The mechanism of nanoparticle effect on fluidic jet during electrospinning process is explained by theory of nanofluids stability which has never been validated experimentally in previous research studies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48185.     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

Effects of hydrocarbon impurities,vibrational relaxation,and boundary-layer-induced pressure rise on the ignition of H2–O2‒Ar mixtures behind reflected shock waves

The results of an experimental and theoretical study of the ignition of H₂–O₂?Ar mixtures behind reflected shock waves are reported. The experiments are performed with mixtures containing from 0.15 to 8.0% H₂ and from 0.75 to 2.0% O₂ at temperatures of 980–1800 K and a total gas concentration of (1.0 ± 0.1) × 10^?5 mol/cm³. The progress of the process is monitored by recording the time evolution of the pressure behind the reflected shock wave and the intensity of the chemiluminescence of electronically excited OH1 radicals (λ = 308 ± 2.5 nm). A numerical model capable of predicting the effects of additional factors, such as hydrocarbon impurities, the vibrational relaxation of the test mixture, and boundary-layer-induced pressure rise, is developed and used to simulate our own and published experimental data on the ignition of H₂–O₂?Ar mixtures. It is demonstrated that the best agreement between experimental and theoretical results is achieved when all the additional factors are taken into account. A sensitivity analysis shows that the effects of the vibrational relaxation of the test mixture and the presence of hydrocarbon impurities are significant only for lean mixtures, whereas the influence of the boundary-layer-induced pressure rise is important across a wide range of stoichiometries at long ignition delay times. Additionally, an analytical model is developed, which takes into account the finite time of the chain?propagation reactions O + H₂ and OH + H₂. The predictions of the numerical and analytical models are demonstrated to be in close agreement for a wide range of mixture compositions and experimental conditions.     

两次喷射对正丁醇部分预混燃烧影响的试验研究

在一台改造的单缸柴油机上进行了预主喷两次喷射策略对正丁醇部分预混燃烧影响的试验研究。研究结果表明:正丁醇燃料实现部分预混燃烧相对汽油燃料对喷射时刻较敏感,最大压力升高率高,稳定运行范围窄,但未燃碳氢、氮氧化物和碳烟排放较低;预主喷两次喷射能有效降低正丁醇部分预混燃烧最大压力升高率,随着预主喷间隔的增大,最大压力升高率先快速降低后上升,预喷射比例越大,获得最低压力升高率对应的预主喷间隔越大;通过优化预主喷两次喷射策略,能显著改善正丁醇部分预混燃烧可控性差、最大压力升高率高的问题,从而有利于实现更大工况范围内的高效燃烧。     

Logarithmic decrease of adhesion force with lateral dynamic revealed by an AFM cantilever at different humidities

Adhesion forces between a tipless cantilever and an Au film were determined to investigate the influence of lateral velocity by recording force curves with an atomic force microscope at 20%–90% relative humidities. The sample was moved laterally, forth and back, with a frequency of 0.001–100 Hz and scan distances of 0.8, 8, and 80 μm to achieve a velocity ranging over 7 orders of magnitude. Experimental results show that at low lateral velocities (between 1.6 nm/s and 1–10 μm/s), the adhesion force either increases or decreases or remains stable with the lateral velocity without a certain characteristic trend. However, after a critical velocity, the adhesion force decreases logarithmically with the lateral velocity (between 1–10 and 16,000 μm/s). The decreasing magnitude can be as large as 97.3% of the maximum adhesion force. This decrease is well-explained by the contact time dependence of water bridges formed by capillary condensation.     

加压毛细管电色谱测定甘蔗中三种多酚类化合物

为建立加压毛细管电色谱(pCEC)分离检测甘蔗中多酚类化合物绿原酸、阿魏酸、表儿茶素的方法,采用C₁₈毛细管色谱柱,以NaH₂PO₄和甲醇为流动相,优化了流动相比例、缓冲盐pH、缓冲盐浓度、分离电压、流速等色谱条件。结果表明,在流动相为15.0 mmol/L NaH₂PO₄+12.5 mmol/L庚烷磺酸钠(pH5.0)/甲醇(50:50,V/V)、分离电压为1 kV、流动相总流速为0.06 mL/min、检测波长为220 nm的色谱条件下,绿原酸、阿魏酸、表儿茶素分离较好,在20~320 μg/mL线性关系良好,相关系数分别为0.9978、0.9922、0.9971,检出限分别为0.14、0.75、1.65 μg/mL,相对标准偏差分别为2.82%、2.69%、1.18%,平均回收率分别为96.79%、100.71%、99.01%。该方法快速、准确、重复性好,适用于甘蔗中多酚类化合物的分离检测。     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Turbulent explosion characteristics of stoichiometric syngas

In the present article, series of experiments were conducted to investigate turbulent explosion characteristics of stoichiometric syngas (with different hydrogen concentrations, 10%‐90% in volume fraction) in a 28.73‐L spherical turbulent premixed explosion system. The evolution of explosion pressure was recorded in different turbulent environment (with different turbulent intensity, 0.100‐1.309 m/s in root mean square value of velocity fluctuation). From the explosion pressure historic curves, the maximum pressure, lag duration, and explosion duration were obtained; the pressure rise rate and fast burn duration were derived; and deflagration index could be further calculated. The interaction effects of turbulent intensity and hydrogen addition on those explosion parameters were systematically analysed and discussed. Based on the results, an empirical formula about deflagration index of stoichiometric syngas was established.     

毛细管电泳在食品安全检测中的应用进展

“民以食为天，食以安为先。”作为一个全球性问题，食品安全不仅影响每个人的健康水平与生活质量，更关乎整个国家的经济与发展。近年来，“毒奶粉”、“地沟油”、“染色馒头”、“毒豆芽”等频繁发作的食品安全恶性事件引起了社会的极大关注，也使人们对食品安全检测的需求进一步提高。而食物种类多样、成分复杂、及加工工艺繁琐等特点也为食品安全检测技术和方法带来了更大的难度和挑战。众多检测方式中，毛细管电泳（CE）以分析成本低、样品用量少、分离模式灵活多样、对环境污染小等优势被广泛应用。本文综述了2015年以来CE在食品安全检测中农药残留、兽药残留、多种食品添加剂、食品包装材料中双酚A和塑化剂等多个方面的分析应用，并对其未来的发展方向作了简要的展望。