Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Facile self-assembly approach to construct a novel MXene-decorated nano-sized phase change material emulsion for thermal energy storage

In recent years, phase change material emulsions (PCMEs) with enhanced energy storage capacities and good flow characteristics have drawn significant attention. However, due to the thermodynamically unstable nature and tiny particle confinement, the nanomaterial modification strategies at PCM/water interface to improve stabilities and reduce supercooling of nano-sized PCMEs (NPCMEs) are very limited and challenging. Herein, we report a facile strategy for constructing MXene-decorated NPCME with good stability, little supercooling, and high thermal conductivity by self-assembly of MXene nanosheets at PCM/water interface. The concentrations of MXene have great influences on the average droplet diameters, stabilities, and thermophysical properties of the NPCMEs. The results show that the PCMs have been well dispersed into the water in the form of quasi-spherical droplets, with average droplet diameters of 242–805 nm. The thermal conductivity of 10 wt% n-tetradecane/water NPCME containing 9 mg ml^-1 MXene is 0.693 W m^-1·K^-1, achieving an enhancement by 15.5%, as compared to that of water. Besides, the MXene-decorated paraffin/water NPCMEs exhibit little supercooling and enhanced heat storage capacities. More importantly, this facile self-assembly strategy opens a new platform for preparing high-performance NPCMEs, which can be used as novel heat transfer fluids for thermal energy storage systems.     

Enhancement of super-hydrophilic/underwater super-oleophobic performance of ceramic membrane with TiO2 nanowire array prepared via low temperature oxidation

A gradient porous ceramic membrane with surface super-hydrophilic and underwater super-oleophobic performance was prepared by combining hydrogel directional freezing method and low temperature oxidation process. The effects of solid contents and sintering temperature on the ceramic membrane matrix were examined. The reaction time and synthesis temperature on the TiO₂ nanowire array were also evaluated. In addition, the related effects on pore size distribution, permeation flux, contact angle, and oil-in-water emulsion separation were systematically investigated. The ceramic membrane matrix pore size changed from 0.5 μm to 25 μm gradually, indicating the gradient structure controlled by the growth of ice. The super-hydrophilic and underwater super-oleophobic performance of ceramic membrane surface was obtained with surface modification by TiO₂ nanowire array, and the surface water contact angle and underwater oil contact angle were less than 5° and over 158°, respectively. The bonding strength between TiO₂ nanowire and ceramic membrane matrix was high enough to withstand ultrasonic waves. The ceramic membrane modified with TiO₂ nanowire array was used for 1000 ppm diesel oil-in-water emulsion separation, and the stable separation efficiency and flux were about 97% and 100–200 L/(m² h bar) even after 10 filtration cycles.     

两种混合单元混合机理的数值模拟

为了研究SV型和SX型混合单元在全静态乳化器的混合机理,使用群体平衡模型对乳化器内部流场进行模拟分析。结果表明,SV型与SX型混合单元的混合机理是油相与水相材料通过混合单元时其空间流动方向改变,在流场内形成大量的漩涡,从而达到乳化的目的;通过比较流体在经过SV型和SX型混合单元后的水相索特平均直径(d_(32)),得出SV型混合单元的乳化效果更强,但同时消耗更多的能量,压降更大。     

Double emulsion (W/O/W) gel stabilised by polyglycerol polyricinoleate and calcium caseinate as mangiferin carrier: insights on formulation and stability properties

Mangiferin (MGF) is a phenolic compound isolated from mango, but its poor solubility significantly limits its use. In this study, MGF was embedded into the inner aqueous phase of W₁/O/W₂ emulsions. Firstly, the dissolution method of MGF was determined. MGF remained stable in solution with pH 13 at 30 min, and its solubility reached 10 mg mL⁻¹. When the pH of MGF solutions was adjusted from pH 13 to pH 6, MGF did not immediately crystallise, providing sufficient time to construct the MGF-loaded W₁/O/W₂ emulsions. Subsequently, the MGF-loaded W₁/O/W₂ emulsions were constructed using polyglycerol polyricinoleate (PGPR) and calcium caseinate (CAS). The formation and stability of the W₁/O/W₂ emulsions were investigated. The MGF-loaded W₁/O/W₂ emulsions stabilised with 1% PGPR and 1% – 3% CAS exhibited a low viscosity, limited loading capacity, and poor stability. Conversely, the MGF-loaded W₁/O/W₂ emulsions stabilised by 3%PGPR–3%CAS exhibited optimal loading capacity (encapsulation efficiency = 95.31% and loading efficiency = 0.91%) and stability, which was attributed to the fact that high viscosity and gel state retarded the migration of inner aqueous phase. These results indicated that the W₁/O/W₂ emulsions stabilised by PGPR and CAS may be a potential alternative for encapsulating mangiferin.     

Bitumen-water interfacial tension modeling by using subtractive clustering method

Calculation of interfacial tension during bitumen production is a crucial issue in heavy crude oil history. Upon variation in pressure, temperature and phases composition, interfacial tension between bitumen and water change. In this work a sophisticated method called subtractive clustering was utilized to predict dynamic interfacial tension between bitumen and water. The subtractive clustering method is composed of optimized fuzzy logic algorithm. A data bank which is collected from open-source literature, is used to create a reliable model. Then the prediction accuracy of the measured dynamic interfacial tension using subtractive clustering have been examined. Results state that the comparison of measured interfacial tension and predicted interfacial tension indicate acceptable accuracy of proposed model. Also more than 90 percent of data points have less than 3 percent absolute error.     

Polystyrene latex particles bearing primary amine groups via soap‐free emulsion polymerization

Polystyrene latexes were prepared in the presence of an amino‐containing functional comonomer, N‐(3‐aminopropyl)methacrylamide hydrochloride (APMH), via soap‐free batch emulsion polymerization initiated by the cationic initiator 2,2′‐azobis(2‐amidinopropane) dihydrochloride. These latexes were characterized by studying the influence of the ionic comonomers on the polymerization kinetics, particle size, surface charge density and colloidal properties. The synthesized latexes were monodisperse with a final size between 100 and 600 nm depending on the APMH concentration. The initial polymerization rate and the particle number increased in accordance with the Smith–Ewart theory for soap‐free styrene emulsion polymerization with a hydrophilic functional comonomer. The final functionalization rate of the particles has been particularly studied with the intention of fitting the prepared latexes to be used in the immobilization of biological molecules for biological sample preparation and diagnostic applications. © 2020 Society of Chemical Industry     

Structure,surface tension,and rheological behaviors of hydrophobically associative polyacrylamides by self-emulsified microemulsion polymerization

Hydrophobically associating copolymers using acrylamide (AM), acrylic acid (AA), and Styrene (St) as comonomers were successfully prepared by self-emulsified microemulsion polymerization, in which low-molecular-weight AM/AA/St copolymers as surfactant and AM as cosurfactant. The structure and chemical composition of AM/AA/St copolymers were characterized by Fourier transform infrared, nuclear magnetic (NMR), and differential scanning calorimeter. The content of PSt in the copolymers is determined by ¹H nuclear magnetic resonance spectra, suggesting that the self-made polymer surfactant can disperse uniformly the St monomers to improve the copolymerization efficiency. Furthermore, the polymerization mechanism of the self-emulsified microemulsion method is explored preliminarily. During the synthesis of the copolymers, the purified copolymer solution is obtained in one step without using a small molecular emulsifier such as sodium dodecyl sulfate, in order to avoid the complicated post-treatment process of the small molecular emulsifier. The copolymers revealed good hydrophobic association properties and low surface tension.