Reduction of sidelobe levels in multicarrier radar signals via the fusion of hill patterns and geometric progression

Multi-carrier waveforms have several advantages over single-carrier waveforms for radar communication. Employing multi-carrier complementary phase-coded (MCPC) waveforms in radar applications has recently attracted significant attention. MCPC radar signals take advantage of orthogonal frequency division multiplexing properties, and several authors have explored the use of MCPC signals and the difficulties associated with their implementation. The sidelobe level and peak-to-mean-envelope-power ratio (PMEPR) are the key issues that must be addressed to improve the performance of radar signals. We propose a scheme that applies pattern-based scaling and geometric progression methods to enhance sidelobe and PMEPR levels in MCPC radar signals. Numerical results demonstrate the improvement of sidelobe and PMEPR levels in the proposed scheme. Additionally, autocorrelations are obtained and analyzed by applying the proposed scheme in extensive simulation experiments.     

Spirobifluorene Dimers: Understanding How The Molecular Assemblies Drive The Electronic Properties

Spirobifluorene (SBF) is one of the most important scaffolds used in the design of organic semi-conductors (OSCs) for electronics. In recent years, among all the structures developed for these applications, SBF dimers have been highlighted due to their great potential in thermally activated delayed fluorescence and in phosphorescent organic light-emitting diodes. Attaching two SBF units generate 10 dimers, each possessing its own structural specificity, which in turn drives its electronic properties. These ten SBF dimers are gathered herein. Understanding how the molecular assembly determines the electronic properties has been one of the pillars of organic electronics. This is the goal of this article. As positional isomerism is a key tool to design OSCs, defining the design guidelines for the SBF scaffold appears of interest for the future of this building block. Herein, the importance of the two main parameters involved in the electrochemical and photophysical properties, namely the nature of the phenyl linkages and the steric congestion between the two SBF units is discussed. The combination of these two parameters drives the electronic properties but their respective weight is different as a function of the regioisomer involved or of the property considered (frontier orbitals energy level, absorption, fluorescence, phosphorescence).     

Charge source and the charging mechanism of the contact electrification of polymer powder

The charge sources, as well as the charging mechanism of the contact electrification (CE) of polymers, are still debatable. Since CE is accompanied by destruction, it is considered that “hard contacting” via ball milling can induce covalent bond scission and produce naked-activated-charge sources. Regarding “soft contacting” via nano-scale sliding, which does not induce covalent bond scission, a frontier-electron, “f-electron,” of the naked-activated-charge source is crucial to electron transfer among the naked-activated-charge sources. Here, we configure naked-activated-charge-source models, naked-activated-mechano-anion, and naked-activated-mechano-cation, which are produced by mechanical energy induced heterogeneous covalent bond scission, as well as naked-activated-mechano-radicals that are produced by homogeneous covalent bond scission. Regarding “soft contacting” among naked-activated-charge sources in a vacuum, f-electron can be transferred from a donor to an acceptor if the energy level of the donor is higher than that of the acceptor. The net amount of the normalized transferred-f-electrons is obtained by adopting settings in which the average energy level of the naked-activated-charge sources (as the donors) is higher than that of the sources employed as acceptors. Thus, the surfaces comprising the donors and acceptors will exhibit positive and negative net surface charges, respectively. We conclude that net surface charges depend on the average energy level of naked-activated-charge sources. Further, we observe that the alignment of polyethylene (PE)-polyvinyl chloride (PVC)-polytetrafluoroethylene (PTFE) to the average energy level is identical to that of the triboelectric series.     

Enhancement of a global lake and reservoir database to aid climate studies and resource monitoring utilizing satellite radar altimetry

Here, we describe the expansion and enhancement of a large (surface area ≥100 km²) lake and reservoir database (1.GREALD). These efforts have also resulted in the spin-off of two additional databases, one containing lakes and reservoirs (2.GREALD, area 10–99 km²), and the other containing ephemeral lakes (3.GELD, area ≥100 km²). These databases are unique sources for projects that utilize satellite radar altimeter data to monitor surface water levels. While 1.GREALD aims to be a complete catalog, 2.GREALD focuses on reservoirs in response to applied sciences programs that monitor water and energy resources. The creation of 3.GELD has climate change objectives as well as water resources and ecosystem conservation applications. The recording of information pertaining to the potential overpasses (waterbody crossings) of the current and archive satellite altimeters is a primary objective as is the need to highlight any form of controlled water level variation. The permanent water databases now contain 6282 entries, half experience some form of anthropogenic influence and ～430 have been identified as potential climatically sensitive terminal lakes. The revised integral surface area distribution is a power law with exponent ?1.016. Statistics reveal that with altimetric repeat visit times of 10-day to monthly, at least 80% of the permanent water bodies (≥10 km²) have been overflown at some period since the 1990s. Current information on water use and reservoir formation date show that the primary use of the reservoir class is hydroelectric power, and that China, Brazil, India, Turkey, and Vietnam dominate the dam building in recent decades.     

基于PSO-ELM模型的潜油柱塞泵冲次优化方法

为改进油井后期泵效低下、能耗高等缺陷，提出了一种基于PSO-ELM模型的潜油柱塞泵冲次优化方法.采用粒子群（PSO）算法与极限学习机（ELM）相结合的方式来实现动液面软测量建模；根据动液面及潜油柱塞泵工作电流变化，以油井运行经济性最优为目的建立目标函数得到潜油柱塞泵冲次，解决了在油井生产时不能准确调节抽油机冲次问题；最后以目标函数关系建立模糊控制器模型，根据输入参数调整潜油柱塞泵冲次.实验结果表明，建立的软测量模型预测动液面精度高，模糊控制器能够更加合理地调整抽油机冲次，最终达到智能调整冲次大小、提高油井采油率及节能的目的.     

医院级CT辐射剂量及诊断剂量水平研究

探讨医院级各部位CT扫描辐射剂量及成人CT检查诊断剂量水平。采集2018年2月—2019年1月本院在GE Light Speed 16 CT设备上进行诊断性CT检查的全部成年人共15 440例的CT检查数据,按照检查部位进行分类,统计各部位的容积剂量指数(CTDI_vol)、剂量长度乘积(DLP)。使用SPSS 19统计软件分析CTDI_vol、DLP的四分位数并计算有效剂量(ED)。结果表明,各部位CTDI_vol的诊断剂量参考水平(DRL)值为:颅脑87.75 mGy、肺部8.09 mGy、上下腹15.82 mGy、上下腹盆腔15.79 mGy;各部位DLP的诊断剂量参考水平(DRL)值为:颅脑1 053.03 mGy·cm、肺部245.19 mGy·cm、上下腹269.96 mGy·cm、上下腹盆腔835.20 mGy·cm。研究中发现肺部CTDI_vol、DLP的DRL值(分别为8.09 mGy、245.19 mGy·cm)低于我国其他地区和其他国家的DRL值;60岁以下患者肺部CT检查CTDI_vol、DLP的DRL值低于8.09 mGy、245.19 mGy·cm,60岁以上患者肺部CT检查CTDI_vol、DLP的DRL值高于8.09 mGy、245.19 mGy·cm。通过研究可以确定医院级各部位CT检查辐射剂量及成人CT检查诊断剂量水平,能为优化CT检查扫描技术和监测辐射剂量提供基础。     

Automated classification of simulated wind field patterns from multiphysics ensemble forecasts

In this study, we have proposed an automated classification approach to identify meaningful patterns in wind field data. Utilizing an extensive simulated wind database, we have demonstrated that the proposed approach can identify low‐level jets, near‐uniform profiles, and other patterns in a reliable manner. We have studied the dependence of these wind profile patterns on locations (eg, offshore vs onshore), seasons, and diurnal cycles. Furthermore, we have found that the probability distributions of some of the patterns depend on the underlying planetary boundary layer schemes in a significant way. The future potential of the proposed approach in wind resource assessment and, more generally, in mesoscale model parameterization improvement is touched upon in this paper.     

平原地区城市湖泊防洪与景观功能协调研究——以枝江市金湖为例

为了使城市湖泊尽可能滞蓄雨洪、发挥景观功能、打造良好的居民"亲水空间",以枝江市金湖为例,根据金湖主要泄洪渠道的实际情况,利用Mike 21模型模拟计算汛限水位值,按照景观水位确定大、小洪水工况下合理的水位。在此基础上,提出传统的静态景观水位与改进的动态景观水位两种方案。结果表明:以50年一遇、30年一遇为代表的大洪水工况下合理景观水位为40.7 m,以20年一遇、10年一遇为代表的小洪水工况合理景观水位为41.3 m;静态方案采用50年一遇洪水计算结果为标准执行,将40.7 m作为金湖固定的景观水位;动态方案水位可在41.3~40.7 m之间波动;金湖适宜采用动态景观水位运行方案,水位可在40.7~41.3 m之间波动;根据短期预报及历史监测资料分析后合理调度,将41.3 m作为金湖常水位,确定预测洪水大小后调整水位迎战洪水。据此,可在充分利用水资源的同时有效协调景观高水位需求与防洪之间的矛盾。     

鄂尔多斯盆地奥陶系马家沟组五段膏盐下白云岩储层形成的主控因素

近期勘探实践表明，鄂尔多斯盆地东部奥陶系马家沟组五段膏盐下白云岩具有良好的天然气勘探开发潜力。为此，综合岩心观察、薄片鉴定、物性分析及地球化学特征等资料，对其岩石学、储集空间和孔渗特征等开展了系统研究。结果表明，鄂尔多斯盆地奥陶系膏盐下储集层为孔隙型白云岩储层，纵向上分布在马五6亚段、马五7亚段和马五9亚段。马五6亚段储集层岩性主要为颗粒白云岩和斑状粉晶白云岩，马五7亚段和马五9亚段储集层岩性主要为颗粒白云岩和粉-细晶白云岩。三个储层段储集空间均以溶蚀孔洞为主，次为残余粒间孔、晶间溶孔、晶间孔和微裂缝，平均孔隙度分别为5.84%、6.81%和7.03%。沉积古地貌、海平面变化和准同生期大气淡水溶蚀作用等因素共同控制膏盐下白云岩储集层的发育与分布。研究认为位于盐岩边界线外侧的中央古隆起带和榆林-横山隆起带地势相对较高，颗粒滩沉积厚度大，在准同生期和浅埋藏期易于发生大气淡水溶蚀作用，其内部赋存的孔隙不易被膏盐岩充填，是盆地内膏盐下有利白云岩储集层的发育区。     

综采工作面覆岩压实区演化采高效应分析及应用

采用相似材料物理模拟试验及理论分析，研究在不同采高条件下覆岩压实区的动态演化规律及形态特征。研究结果表明:在煤层开采之后，采动覆岩离层量分布呈“马鞍”状，采空区底板在一定区域内存在应力集中，结合两者可作为压实区底部边界判定依据;采空区覆岩压实区的形态及时空演化规律受采高与工作面推进距离的共同影响，得到了压实区宽度、高度及垮落角度的演化规律与采高的关系;同时，结合冒落带岩体的碎胀特征与底板应力集中的特点，分析了压实区压实程度的采高效应，即在一定范围内，采高越高，压实程度越大。基于采动裂隙椭抛带理论，在试验结果分析的基础上，建立了采动裂隙椭抛带压实区的数学表达方程，为卸压瓦斯抽采系统的布置及参数优化提供借鉴。