井下硐室大爆破实践

酒钢镜铁山矿运用硐室大爆破处理山头岩体，以便为２号（中）矿体的开采形成良好的覆盖层。由于爆破设计合理，工程质量较好，达到了预期的目的。     

乌兰矿采矿现状及技术应对方案

本文分析了乌兰矿投产前期采矿现状及存在的主要问题,针对该矿所处蒙古国经济落后、投资风险大的现实状况,为避免生产中断、规避投资风险,早日回收前期投资考虑,采取了双斜坡道开拓、全尾胶结充填、高端壁空场嗣后充填采矿、多中段组合式连续开采等系列技术应对方案。大大降低了一次性投资规模及投资风险,前期投资得以快速回笼的同时,矿山产能也充分释放,确保了矿山的持续稳定,取得了较好的经济和社会效益。为海外地下近地表矿体开采矿山规避投资风险提供了很好的技术方案借鉴。     

Upgrading of low-grade manganese ore based on reduction roasting and magnetic separation technique

The selective reduction of low-grade manganese ore followed by magnetic separation was proposed to produce rich-manganese ore. The optimized parameters include a roasting temperature of 1050°C, a roasting time of 6 h, a manganese ore size of 8–13 mm, and an FC/O ratio of 2.5. The reduction roasting products of low-grade manganese ore, mainly comprising of MnO, metallic iron, and residual gangue, could be separated effectively to obtain rich-manganese ore and magnetic product. The RMn, RFe, and TMn can reach the peak values of 71.00%, 93.60%, and 56.20wt%, respectively, at a rational magnetic field strength of 100 mT. In particular, the Mn/Fe ratio is up to 10.85, which meets the requirements of ferromanganese alloy smelting.     

电荷调节剂的研究现状与进展

电荷调节剂（charge control agent，CCA）作为一种重要的改变墨粉带电特性与起电速率的添加剂，逐渐受到研究者们越来越多的重视。本文针对目前墨粉所用的几类传统电荷调节剂的发展历程进行了总结。文中指出按照电性的不同，CCA可分为正电性与负电性两大类。在传统CCA中，正电性CCA包括苯胺黑类与季铵盐类，前者由于本身具有颜色无法应用到彩色打印中，而季铵盐类因其合成简单、色彩较浅等优势是目前使用最多的正电性CCA。负电性CCA包括偶氮金属络合物类与叔丁基水杨酸金属络合物类，其中后者因其带电量稳定、在树脂中分散性好且无色的优点成为目前应用最广泛的传统CCA。近年来，金属络合物型CCA由于在高温状态下不稳定的缺点使结构中不含金属离子的新型CCA成为研究的热点。此外，由于对环境无害及高画质的要求提高，生物基材料型CCA与通过聚合反应合成的CCA应用也越来越普及。在世界范围内，日本的东方化学工业株式会社、保土谷化学工业株式会社与中国湖北鼎龙化学股份有限公司是最大的3个CCA生产商，而前两家公司目前占据全球80%以上的份额，因此研究发展高端显像信息化学品仍然是我国墨粉行业的重要任务。文章针对未来如何解决不含金属离子的电荷调节剂合成成本过高的问题，指出发展更具价格竞争力、带电性能充分、对环境无害、面向彩色打印的无色电荷调节剂将成为电荷调节剂发展的新趋势。     

Degradation mechanism of high alumina refractory bricks by reaction with deposits in a rotary kiln for fluxed iron ore pellets production

The formed deposits wear out of refractory wall linings in the rotary kiln and may cause production disturbances. This study describes the chemical composition and mineralogical phase components at the deposit/refractory interface in the rotary kiln for fluxed iron ore pellets production. The main phases of refractory bricks are corundum and mullite, while the deposits mainly contain hematite and silicates. The main phases in the deposit/refractory brick contact zone are hematite, anorthite (CaAl₂Si₂O₈), mullite, corundum, and silicates. Moreover, the hematite phases in the deposit/brick interface averagely contain 6.98 wt% Al and 1.38 wt% Ti. The silicates in the contact zone contain higher aluminium content and lower iron content than the silicates in the deposits. Finally, the thermodynamic analysis indicates that the main phases in the deposits can react with the refractory to form Al₂Fe₂O₆, CaAl₂Si₂O₈, feldspar, and liquid phases lead to the degradation of bricks in the kiln during the iron ore pellets production.     

川东南丁山地区燕山期—喜马拉雅期差异构造-热演化与页岩气保存

中国的海相富有机质页岩经历了多期构造改造，其含气性具有明显的差异。页岩气在不同构造演化阶段的保存条件是揭示页岩气差异富集机理的关键科学问题之一，开展构造-热演化研究可以明确其热演化史和构造隆升-剥蚀过程，为其评价提供演化格架。研究以丁山地区下古生界页岩为对象，联合磷灰石裂变径迹、磷灰石（U-Th）/He和锆石（U-Th）/He等多个古温标反演热演化史，结合镜质体反射率重建的最高古地温剖面，对丁山地区燕山期以来的差异构造隆升过程和剥蚀量进行了恢复，并在此基础上结合流体包裹体分析对丁山地区龙马溪组页岩的压力演化过程进行了模拟；根据页岩在埋藏—抬升过程中的温、压演化特征，定量表征了不同抬升阶段页岩含气量的变化，建立了龙马溪组页岩"埋藏—生烃—抬升"的演化格架。分析表明，丁山地区在燕山期和喜马拉雅期经历了不同的构造隆升过程。燕山期表现为"早期快速隆升—晚期缓慢隆升"的分段隆升，具有自NW向SE递进隆升且隆升幅度逐渐增大的特征；喜马拉雅期表现为整体快速隆升。燕山期是丁山地区产生差异构造隆升的主要时期。受这种差异构造隆升-剥蚀作用的影响，龙马溪组页岩的降温、降压过程和页岩气的散失过程具有明显的差异。燕山期的差异构造隆升是造成丁山地区龙马溪组页岩含气性呈平面分带的主要原因。     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

云南红河铜镍硫化矿混合浮选研究

云南红河铜镍硫化矿,含Cu 1.45%、Ni 2.8%、S 35.37%,极具经济潜力。采用混合浮选,研究了磨矿细度、药剂种类及用量等对各矿物回收的影响。试验研究结果表明,当磨矿细度为-74μm占80%,石灰用量为3 000g/t时,获得品位和回收率均较高的铜镍混合粗精矿产品,含Cu 4.99%,Cu回收率95.54%,含Ni 8.08%,Ni回收率87.52%,混合粗精矿中的铜镍矿物均实现了较高的回收率。本研究为铜镍硫化矿的有效回收提供了一种可借鉴的方法。     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.