井下硐室大爆破实践

酒钢镜铁山矿运用硐室大爆破处理山头岩体，以便为２号（中）矿体的开采形成良好的覆盖层。由于爆破设计合理，工程质量较好，达到了预期的目的。     

乌兰矿采矿现状及技术应对方案

本文分析了乌兰矿投产前期采矿现状及存在的主要问题,针对该矿所处蒙古国经济落后、投资风险大的现实状况,为避免生产中断、规避投资风险,早日回收前期投资考虑,采取了双斜坡道开拓、全尾胶结充填、高端壁空场嗣后充填采矿、多中段组合式连续开采等系列技术应对方案。大大降低了一次性投资规模及投资风险,前期投资得以快速回笼的同时,矿山产能也充分释放,确保了矿山的持续稳定,取得了较好的经济和社会效益。为海外地下近地表矿体开采矿山规避投资风险提供了很好的技术方案借鉴。     

Upgrading of low-grade manganese ore based on reduction roasting and magnetic separation technique

The selective reduction of low-grade manganese ore followed by magnetic separation was proposed to produce rich-manganese ore. The optimized parameters include a roasting temperature of 1050°C, a roasting time of 6 h, a manganese ore size of 8–13 mm, and an FC/O ratio of 2.5. The reduction roasting products of low-grade manganese ore, mainly comprising of MnO, metallic iron, and residual gangue, could be separated effectively to obtain rich-manganese ore and magnetic product. The RMn, RFe, and TMn can reach the peak values of 71.00%, 93.60%, and 56.20wt%, respectively, at a rational magnetic field strength of 100 mT. In particular, the Mn/Fe ratio is up to 10.85, which meets the requirements of ferromanganese alloy smelting.     

Degradation mechanism of high alumina refractory bricks by reaction with deposits in a rotary kiln for fluxed iron ore pellets production

The formed deposits wear out of refractory wall linings in the rotary kiln and may cause production disturbances. This study describes the chemical composition and mineralogical phase components at the deposit/refractory interface in the rotary kiln for fluxed iron ore pellets production. The main phases of refractory bricks are corundum and mullite, while the deposits mainly contain hematite and silicates. The main phases in the deposit/refractory brick contact zone are hematite, anorthite (CaAl₂Si₂O₈), mullite, corundum, and silicates. Moreover, the hematite phases in the deposit/brick interface averagely contain 6.98 wt% Al and 1.38 wt% Ti. The silicates in the contact zone contain higher aluminium content and lower iron content than the silicates in the deposits. Finally, the thermodynamic analysis indicates that the main phases in the deposits can react with the refractory to form Al₂Fe₂O₆, CaAl₂Si₂O₈, feldspar, and liquid phases lead to the degradation of bricks in the kiln during the iron ore pellets production.     

Ceramics composites from iron ore tailings and blast furnace slag

The search for materials and methods capable of reducing human impacts on the environment is of utmost importance nowadays. This study's primary purpose was to analyze the technical feasibility of ceramic composites production utilizing Fundão Dam's Iron Ore Tailings (IOT), Blast Furnace Slag (BFS) from charcoal, and Foundry Sand (FS) as partial substitutes for the traditional raw materials – sand and clay – for application in building industry materials. The composites were molded in rectangular specimens and fired at temperatures of 900, 950, 1000, 1050, and 1200 °C. The developed materials were analyzed and characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetry (TGA), and Differential Thermal Analysis (DTA). The obtained materials had flexural strength modulus of up to 12.19 MPa, water absorption ranging from 2 to 22%, linear shrinkage ranging from 0.02 to 6.50%, and apparent density ranging from 2.03 to 1.63 g/cm³. The study of the internal structure formation process revealed the formation of amorphous structures in the composites. The results demonstrated that these waste materials may be jointly used in construction materials, contributing to the reduction of natural resource extraction, besides enabling their correct disposal, minimizing environmental impacts, and improving the life quality of the surrounding communities.     

云南红河铜镍硫化矿混合浮选研究

云南红河铜镍硫化矿,含Cu 1.45%、Ni 2.8%、S 35.37%,极具经济潜力。采用混合浮选,研究了磨矿细度、药剂种类及用量等对各矿物回收的影响。试验研究结果表明,当磨矿细度为-74μm占80%,石灰用量为3 000g/t时,获得品位和回收率均较高的铜镍混合粗精矿产品,含Cu 4.99%,Cu回收率95.54%,含Ni 8.08%,Ni回收率87.52%,混合粗精矿中的铜镍矿物均实现了较高的回收率。本研究为铜镍硫化矿的有效回收提供了一种可借鉴的方法。     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.     

硫酸体系中锰钽铌矿加压浸出研究

针对单一硫酸体系锰钽铌矿加压浸出下钽铌浸出率均不到10%的问题,在硫酸体系引入助浸剂,考察氟化铵、双氧水、反应压强、硫酸浓度、反应温度、氟化铵矿比对锰钽铌矿加压浸出的影响,采用XRD对浸渣进行物相表征。实验结果表明,在锰钽铌矿加压浸出中,引入助浸剂氟化铵,温度200℃、硫酸浓度50%及氟化铵/矿比为0.8∶1的条件下钽浸出率超过93%,铌浸出率超过96%。引入氟化铵对硫酸体系下锰钽铌矿的加压浸出效果的提升十分显著。     

矿床成因对硫化铜矿选矿工艺流程的影响

矿床成因决定了矿石类型、矿物共伴生组合、矿石结构与构造、矿物结晶程度等性质的差异,进而对矿石选别回收工艺产生影响。重点阐述了五种不同类型铜硫矿床的矿床特征和工艺矿物学特点,分析总结了各类型铜硫矿床的矿石结构构造、矿物组成等典型特征,并对不同类型铜硫矿床的典型特征对选矿工艺流程的影响进行了分析。通过研究初步探明了不同类型铜硫矿床物理化学特征及其影响浮选工艺流程的基本规律,可为不同类型铜硫矿选矿工艺流程的制定提供借鉴。