船闸直立墙基坑开挖与锚固施工程序

三峡船闸深槽开挖与锚固工程量大，工期紧，施工强度高，施工难度大。因此，合理的施工程序有利于边坡稳定和施工，是快速和高质量施工的关键。分析了永久船闸直立墙基坑开挖与锚固施工程序的复杂性和进行研究的必要性。介绍了设计阶段研究船闸开挖与锚固的施工程序。对施工过程中研究施工程序时考虑的因素，研究的主要内容以及实际采用的施工程序作了简要的分析，归纳和总结。     

Al-Cu-Fe QUASICRYSTALLINE PHASE FORMATION BY MECHANICAL ALLOYING

Al-Cu-Fe alloys were prepared from elemental powders in a high-energy planetary ball mill. A sequence of solid state reactions resulting in quasicrystal (QC) phase formation takes place during heating of the as-milled powder. These reactions were studied by both differential scanning calorimetry and x-ray diffraction methods. Mechanically alloyed powders were consolidated by cold and hot pressing, as well as by explosive compaction. After annealing at sufficiently high temperatures, the consolidated samples are single-phase QC, except the ones consolidated by explosion. The high reactivity of the as-milled alloys causes the appearance of high porosity of the consolidated samples after the annealing.     

Improvement of levitation characteristics in a magnetic bearing system using HTSC‐permanent magnet hybrid structure

Magnetic bearing using pinning force of a permanent magnet and a high‐temperature superconductor has been developed. Additional permanent magnet is introduced to increase the levitation force of the magnetic bearing. In this hybrid magnetic bearing system, levitation force is mainly given by the repulsive force of the permanent magnets, and stability for the lateral direction is given by pinning force of the superconductor. The experimental device is developed. A ring‐type superconductor and a bulk one are examined. Levitation characteristics of the hybrid magnetic bearing are measured. The bulk superconductor shows better characteristics of both levitation and lateral stability than the ring one. Levitation force of the hybrid system becomes about twice as large as that of the nonhybrid one. Although, the repulsive force of the permanent magnet decreases the lateral stability of the system, its influence becomes small by choosing an adequate position of the permanent magnets and the superconductor. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 71–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10350     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Failure of greenstone, jasper and cataclasite aggregate in bituminous concrete due to studded tyres: Similarities and differences

In wintertime, the use of studded tyres is common in the Nordic countries, steeply in creasing road wear. Apart from reducing surface quality and durability, the airborne dust presents a potential health hazard. To reduce road wear and dust release, there is a tendency to use harder and more wear-resistant aggregate materials.On the roads in and around Trondheim, mid-Norway, three types of aggregate material are common: greenstone, jasper and ‘mylonite’, in fact a cataclasite. Extensive laboratory testing suggests that cataclasite aggregate has better wear resistance than greenstone, but less than jasper [Erichsen E, Schiellerup H, Gautneb, H, Ottesen RT, Broekmans M. Road dust in Trondheim — analysis of the mineral content of airborne dust. (In Norwegian.) Geological Survey of Norway, NGU-report 2004. 037; 2004. p. 73]. However , observations on fluorescence-impregnated plane and thin sections demonstrate that in practice, cataclasite wears faster than greenstone, which may be attributed to its oriented fabric, as opposed to the random fabric in greenstone and jasper. The original article by Rosiwal from 1896 [Rosiwal A. Neue Untersuchungser gebnisse über die Härte von Mineralien und Gesteine. Verhandlungen der kaiserlich-königlichen geologischen Reichsanstalt, vol. 17/18; 1896. p. 475–491] on abrasion hardness and anisotropy provides an elegant explanation for the field observations.     

激光冲击诱发相变的实验研究

本对激光冲击是否可以诱发相变进行了试验研究。用功率密度为１．０６×１０＾８Ｗ／ｃｍ＾２的激光器冲击Ｔ８钢表面。实验结果表明激光冲击处理使Ｔ８钢的表面显微硬度有所提高并可以发生马氏体相变。冲击处理后材料表面硬度提高了两倍，认为相变是Ｔ８钢表面硬度提高的原因之一。     

Symmetric Structures of Ultrahard Materials

Diamond and BN have common relatively soft precursor structures that are hexagonal. Electronic structure calculations have now revealed subtle energy differences between the two materials. Another hard material, stishovite, also has a relatively soft precursor phase, quartz, and here again electronic structure calculations have given insight into the nature of the phase transformation. On the other hand, with boron-related materials, the main focus is to connect basic icosahedra structures to produce a hard material. The structural aspects of these materials are examined and possible consequences for low- and high-coordination ultrahard nitrides considered.     

盘式永磁无刷电动机设计中的一些问题

介绍了盘式永磁无刷电动机的原理和结构，探讨了其设计特点，解决了磁路分析计算和电机主要尺寸确定以及磁极形状选择的问题。     

Structure and Magnetic Properties of LaCo_(13-X)M_X Intermetallic Compounds

ＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰｒｏｐｅｒｔｉｅｓｏｆＬａＣｏ＿（１３－Ｘ）Ｍ＿ＸＩｎｔｅｒｍｅｔａｌｌｉｃＣｏｍｐｏｕｎｄｓＷＵＪｉａｎＭｉｎ；ＬＩＦｅｎｇ；ＴＡＩＬｉＣｈｉａｎｄＺＨＥＭＧＱｕｎＳｔｒｕｃｔｕｒｅａｎｄＭａｇｎｅｔｉｃＰ...